Ferm AGM1089 User manual

Brand: Ferm

Model: AGM1089

Category: Power tools

Type: User manual

WWW.FERM.COM

Original instructions 05

AGM1089

Fig. A

1112

Fig. B

Fig. C

ANGLE GRINDER

AGM1089

Thank you for buying this Ferm product.

By doing so you now have an excellent product,

delivered by one of Europe’s leading suppliers.

All products delivered to you by Ferm are

manufactured according to the highest standards

of performance and safety. As part of our

philosophy we also provide an excellent customer

service, backed by our comprehensive warranty.

We hope you will enjoy using this product for

many years to come.

SAFETY WARNINGS

WARNING

Read the enclosed safety warnings,

the additional safety warnings and the

instructions. Failure to follow the safety

warnings and the instructions may result

in electric shock, fire and/or serious

injury. Keep the safety warnings and

the instructions for future reference.

The following symbols are used in the user

manual or on the product:

Read the user manual.

Risk of personal injury.

Risk of electric shock.

Immediately remove the mains plug from

the mains if the mains cable becomes

damaged and during cleaning and

maintenance.

Risk of flying objects. Keep bystanders

away from the work area.

Wear safety goggles.

Wear hearing protection.

Wear safety gloves.

Do not press the spindle lock button

while the motor is running.

Risk of fire.

Double insulated.

Do not dispose of the product in

unsuitable containers.

GENERAL POWER TOOL SAFETY

WARNINGS

WARNING!

Read all safety warnings and all

instructions. Failure to follow the

warnings and instructions may result in electric

shock, fire and/or serious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers

to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered

or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power

tools create sparks which may ignite the dust

or fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can

cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way. Do

not use any adapter plugs with earthed

(grounded) power tools. Unmodied plugs

and matching outlets will reduce risk of

electric shock.

b) Avoid body contact with earthed or

grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is

an increased risk of electric shock if your body

is earthed or grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the

power tool. Keep cord away from heat, oil,

sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric

shock.

e) When operating a power tool outdoors, use

an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces

the risk of electric shock.

f) If operating a power tool in a damp

location is unavoidable, use a residual

current device (RCD) protected supply. Use

of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and

use common sense when operating a

power tool. Do not use a power tool while

you are tired or under the inuence of

drugs, alcohol or medication. A moment of

inattention while operating power tools may

result in serious personal injury.

b) Use personal protective equipment. Always

wear eye protection. Protective equipment

such as dust mask, non-skid safety shoes,

hard hat, or hearing protection used for

appropriate conditions will reduce personal

injuries.

c) Prevent unintentional starting. Ensure

the switch is in the off-position before

connecting to power source and/or battery

pack, picking up or carrying the tool.

Carrying power tools with your nger on the

switch or energising power tools that have the

switch on invites accidents.

d) Remove any adjusting key or wrench

before turning the power tool on. A wrench

or a key left attached to a rotating part of the

power tool may result in personal injury.

e) Do not overreach. Keep proper footing

and balance at all times. This enables better

control of the power tool in unexpected

situations.

f) Dress properly. Do not wear loose clothing

or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose

clothes, jewellery or long hair can be caught in

moving parts.

g) If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce dust

related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the

correct power tool for your application. The

correct power tool will do the job better and

safer at the rate for which it was designed.

b) Do not use the power tool if the switch

does not turn it on and off. Any power tool

that cannot be controlled with the switch is

dangerous and must be repaired.

c) Disconnect the plug from the power source

and/or the battery pack from the power

tool before making any adjustments,

changing accessories, or storing power

tools. Such preventive safety measures

reduce the risk of starting the power tool

accidentally.

d) Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of

untrained users.

e) Maintain power tools. Check for

misalignment or binding of moving parts,

breakage of parts and any other condition

that may affect the power tool’s operation.

If damaged, have the power tool repaired

before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

g) Use the power tool, accessories and

tool bits etc. in accordance with these

instructions, taking into account the

working conditions and the work to

be performed. Use of the power tool for

operations different from those intended could

result in a hazardous situation.

5) Battery tool use and care

a) Recharge only with the charger specied

by the manufacturer. A charger that is

suitable for one type of battery pack may

create a risk of re when used with another

battery pack.

b) Use power tools only with specically

designated battery packs. Use of any other

battery packs may create a risk of injury and

re.

c) When battery pack is not in use, keep it

away from other metal objects, like paper

clips, coins, keys, nails, screws or other

small metal objects that can make a

connection from one terminal to another.

Shorting the battery terminals together may

cause burns or a re.

d) Under abusive conditions, liquid may be

ejected from the battery; avoid contact.

If contact accidentally occurs, ush with

water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from the

battery may cause irritation or burns.

6) Service

a) Have your power tool serviced by a

qualied repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained.

Additional safety warnings for angle grinders

• Themachinehasbeendesignedforuseas

a grinder or cut-off machine. The machine is

not suitable for operations such as sanding,

wire brushing, polishing, etc. Risk of personal

injury.

• Donotuseaccessorieswhicharenot

specifically designed and recommended by

the manufacturer. Risk of personal injury.

• Inspectthemachineandtheaccessories

beforeeachuse.Donotuseaccessories

which are bent, cracked, or otherwise

damaged.Ifthemachineoroneofthe

accessories is dropped, inspect the machine

ortheaccessoryfordamage.Ifnecessary,

replace the accessory.

• Letthemachinerunatnoloadinasafearea

aftermountingtheaccessories.Ifthemachine

vibrates strongly, immediately switch off the

machine, remove the mains plug from the

mains, and try to solve the problem.

• Makesurethatthemaximumspeedforthe

grinding disc is larger than or the same as the

maximum speed of the machine. Refer to the

rating plate on the machine.

• Onlyusegrindingdiscswiththecorrect

thickness and outside diameter. Refer to the

rating plate on the machine.

• Makesurethatspindlediameterofgrinding

discs, spacers, tension nuts, etc. correspond

to the diameter of the spindle on the machine.

• Makesurethatthegrindingdiscisproperly

mounted.Donotuseadaptersorotheraids

to mount grinding discs with another spindle

diameter.

• Onlyusegrindingdiscsthatarerecommended

bythemanufacturer.Onlyuseguardsthatare

specifically designed for the grinding disc.

• Onlyusegrindingdiscsthataresuitableforthe

application. For example: do not grind with the

side of a cut-off disc.

• Donotusethemachinewithouttheguard.

Securely mount the guard for maximum safety.

Makesurethattheuserisprotectedfromthe

grinding disc as much as possible.

• Makesurethattheworkpieceisproperly

supported or fixed.

• Wearsafetygoggles.Wearhearingprotection.

Wearadustmask.Ifnecessary,useother

protective means, such as safety gloves,

safety shoes, etc. Risk of personal injury.

• Keepbystandersawayfromtheworkarea.

Makesurethatallpersonsintheworkarea

wear protective equipment. Risk of personal

injury.

• Keepthemainscableawayfromtherotating

grindingdisc.Ifthemainscabletouchesthe

rotating grinding disc, your hands or arms may

come in contact with the grinding disc.

Risk of personal injury.

• Holdthemachinebytheinsulatedgripping

surfaces where the grinding disc may

contacthiddenwiringorthemainscable.If

the grinding disc contacts a ’live’ wire, the

exposed metal parts of the machine can also

become ’live’. Risk of electric shock.

• Donotusethemachinewhilecarryingitat

your side. Risk of personal injury.

• Donotusethemachineonworkpieces

requiring a maximum grinding depth that

exceeds the maximum grinding depth of the

grinding disc.

• Donotuseaccessoriesthatrequireliquid

coolants. Risk of electric shock.

• Donotusethemachinenearflammable

materials. Risk of fire.

• Donotworkmaterialscontainingasbestos.

Asbestos is considered carcinogenic.

• Donotworkmetalwithamagnesiumcontent

of more than 80%.

• Bewarethatthegrindingdisccontinuesto

rotate for a short period after switching off the

machine.Donotattempttobringthegrinding

disc to a standstill yourself.

• Neverputthemachinedownonatableora

workbench before it has been switched off.

• Regularlycleantheventilationslots.

Risk of electric shock.

Kickbackisasuddenreactiontoapinched,

bound or twisted grinding disc, which causes

the machine to lift up and out of the workpiece

towardstheuser.Ifthegrindingdiscispinched

or bound tightly by the cut, the grinding disc jams

and the machine is rapidly driven back towards

theuser.Ifthegrindingdiscistwistedinthecut,

the back edge of the grinding disc can dig into

the top surface of the workpiece, which causes

the grinding disc to climb out of the cut and jump

back towards the user.

Kickbackistheresultofincorrectuseofthe

machine and/or incorrect operating procedures

orconditions.Kickbackcanbeavoidedbytaking

proper precautions:

• Firmlyholdthemachinewithbothhands.

Position your arms to resist kickback forces.

Position your body to either side of the

grinding disc, but not in line with the grinding

disc.Kickbackcancausethegrindingdisc

tojumpbackwards.Ifproperprecautionsare

taken, kickback forces can be controlled by

the user.

• Beextracarefulwhenusingthemachineon

corners,sharpedges,etc.Makesurethatthe

grinding disc does not become jammed.

Risk of kickback.

• Ifthegrindingdiscjamsorifyouinterrupta

cut for any reason, release the on/off switch

and hold the machine motionless in the

material until the grinding disc comes to a

complete standstill. Never attempt to remove

the machine from the workpiece or pull the

machine backward while the grinding disc is in

motion. Risk of kickback.

• Donotusebluntordamagedgrindingdiscs.

Unsharpened or incorrectly mounted grinding

discs produce narrow cuts, which causes

excessive friction and kickback and increases

the risk of the grinding discs becoming

jammed.

• Donotusetoothedsawblades.Donotuse

woodcarving blades for saw chains.

Risk of personal injury.

Electrical safety

Always check that the voltage of the

power supply corresponds to the voltage

on the rating plate.

• Donotusethemachineifthemainscableor

the mains plug is damaged.

• Onlyuseextensioncablesthataresuitable

for the power rating of the machine with a

minimumthicknessof1.5mm2.Ifyouusea

extension cable reel, always fully unroll the

cable.

Technical data

AGM1089

Mains voltage 220-240 V~

Mains frequency 50 Hz

Power input 800 W

No-load speed 11.000/min-1

Grinding disc

Diameter 100 mm

Bore 16 mm

Spindle thread M10

Weight 1.9 kg

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work

patterns

Wear hearing protection.

DESCRIPTION (FIG. A)

Your angle grinder has been designed for grinding

and cutting masonry and steel.

1. On/offswitch

2. Spindle lock button

3. Spindle

4. Guard

5. Maingrip

6. Auxiliary grip

ASSEMBLY

Before assembly, always switch off the

machine and remove the mains plug from

the mains.

Mounting and removing the guard (fig. B)

Do not use the machine without the

guard.

Mounting

• Placethemachineonatablewiththespindle

(3) facing upwards.

• Keepthespindlelockbutton(2)pressedand

remove the flange (7) using the flange key (8).

• Ifnecessary,removethegrindingdisc(9).

• Removetheflange(10).

• Mounttheguard(4).Securetheguard(4)by

tightening the screw (11) and the nut (12).

• Mounttheflange(10).

• Ifnecessary,mountthegrindingdisc(9).

• Keepthespindlelockbutton(2)pressedand

mount the flange (7) using the flange key (8).

Removing

• Placethemachineonatablewiththespindle

(3) facing upwards.

• Keepthespindlelockbutton(2)pressedand

remove the flange (7) using the flange key (8).

• Ifnecessary,removethegrindingdisc(9).

• Removetheflange(10).

• Removetheguard(4)bylooseningthescrew

(11) and the nut (12).

• Mounttheflange(10).

• Ifnecessary,mountthegrindingdisc(9).

• Keepthespindlelockbutton(2)pressedand

mount the flange (7) using the flange key (8).

Mounting and removing the grinding disc

(fig.B)

Do not use the machine without the

guard.

Mounting

• Placethemachineonatablewiththeguard(4)

facing upwards.

• Keepthespindlelockbutton(2)pressedand

remove the flange (7) using the flange key (8).

• Mountthegrindingdisc(9).

• Keepthespindlelockbutton(2)pressedand

mount the flange (7) using the flange key (8).

Removing

• Placethemachineonatablewiththeguard(4)

facing upwards.

• Keepthespindlelockbutton(2)pressedand

remove the flange (7) using the flange key (8).

• Removethegrindingdisc(9).

• Keepthespindlelockbutton(2)pressedand

mount the flange (7) using the flange key (8).

Mounting and removing the auxiliary grip

(fig.C)

Mounting

• Tightentheauxiliarygrip(6)intooneofthe

mounting holes (13).

Removing

• Loosentheauxiliarygrip(6)fromthemounting

hole (13).

USE

Switching on and off (fig. A)

• Toswitchonthemachineincontinuousmode,

fliptheOn/Offswitch(1)to‘Off’

• Toswitchoffthemachine,fliptheOn/Off

switch(1)to‘Off’

Hints for optimum use

• Clamptheworkpiece.Useaclampingdevice

for small workpieces.

• Drawalinetodefinethedirectioninwhichto

guide the grinding disc.

• Holdthemachinewithbothhands.

• Switchonthemachine.

• Waituntilthemachinehasreachedfullspeed.

• Placethegrindingdiscontheworkpiece.

• Slowlymovethemachinealongthepre-drawn

line, firmly pressing the grinding disc against

the workpiece.

• Donotapplytoomuchpressureonthe

machine.Letthemachinedothework.

• Switchoffthemachineandwaitforthe

machine to come to a complete standstill

before putting the machine down.

CLEANING AND MAINTENANCE

Before cleaning and maintenance, always

switch off the machine and remove the

mains plug from the mains.

• Regularlycleanthehousingwithasoftcloth.

• Keeptheventilationslotsfreefromdustand

dirt.Ifnecessary,useasoft,moistclothto

remove dust and dirt from the ventilation slots.

Carbon brushes

Ifthecarbonbrushesareworn,thecarbon

brushes must be replaced by the customer

service department of the manufacturer or a

similarly qualified person.

WARRANTY

Consulttheenclosedwarrantyterms.

ENVIRONMENT

Disposal

The product, the accessories, and the

packaging must be sorted for

environmentally friendly recycling.

Only for EC countries

Donotdisposeofpowertoolsintodomestic

waste. According to the European Guideline

2012/19/EUforWasteElectricalandElectronic

Equipment and its implementation into national

right, power tools that are no longer usable must

be collected separately and disposed of in an

environmentally friendly way.

Spare parts list

AGM1089

No. Description Position

480012 Innerflange 1

480013 Outterflange 2

480014 Wheel guard 3

480015 Shaft 4

480021 6001 bearing 10

480024 Gear wheel 13

480025 Needle bearing 14

480186 Spindle lock complete 17..19

480031 Side handle 20

480033 Pinion 22

480035 Bearing 608 24

480185 Bearing + sleeve + dust ring + spacer 28..30

480042 Bearing sleeve 31

480045 Stator 34

480050 Carbonbrush2x 39

480051 Brush holder 2x 40

480053 Switch 42

480060 Wrench 49

Exploded view

1610-20

Ferm AGM1089 User manual

Brand: Ferm

Model: AGM1089

Category: Power tools

Type: User manual

Download PDF

report

Ferm AGM1089 User manual

Ferm AGM1089 User manual

Related papers

Other documents