ProForm PFIVEL83712 Owner's manual

Brand: ProForm

Model: PFIVEL83712

Category: Fitness, gymnastics & weight training

Type: Owner's manual

USERʼS MANUAL

Visit our website

www.iconsupport.eu

Model No. : PFIVEL83712.0

Serial No ___________

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Keep this manual

for future reference.

QUESTIONS ?

If you have questions, or if there are

missing parts, please contact us:

Call: 08457 089 009

From Ireland: 053 92 36102

Website: www.iconsupport.eu

E-mail: [email protected]

Write:

ICON Health & Fitness, Ltd.

c/o HI Group PLC

Express Way

Whitwood, West Yorkshire

WF10 5QJ

Write the serial number in the

space above for reference.

Serial number decal

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS

. . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

WARNING DECAL PLACEMENT

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

HOW TO PLUG THE POWER ADAPTER. . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

HOW TO OPERATE THE ELLIPTICAL

. . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

FEATURES OF THE CONSOLE . . . . . . . .

. . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

MAINTENANCE AND TROUBLESHOOTING. . . . . . . . . . . . . . .

. . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

EXERCISE GUIDELINES . . . . . . . . . . . . . . . .

. . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

EXPLODED DRAWINGS.. . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

NOTES . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

ORDERING REPLACEMENT PARTS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Last Page

IMPORTANT PRECAUTIONS

1. Before beginning any exercise program,

consult your physician. This is especially

important for persons over age 35 or

persons with pre-existing health problems.

2. Use the elliptical only as described in this

manual.

3. It is the responsibility of the owner to ensure

that all users of the elliptical are adequately

informed of all precautions.

4. The elliptical is intended for home use only.

Do not use the elliptical in a commercial,

rental, or institutional setting.

5. Keep the elliptical indoors, away from

moisture and dust. Place the elliptical on a

level surface, with a mat beneath it to protect

the oor or carpet. Make sure that there is at

least 3 ft. (0.9 m) of clearance in the front and

rear of the elliptical and 2 ft. (0.6 m) on each

side.

6. Inspect and properly tighten all parts

regularly. Replace any worn parts

immediately.

7. Keep children under age 12 and pets away

from the elliptical at all times.

8.The elliptical should not be used by persons

weighing more than 250 lbs. (115 kg).

9. Wear appropriate clothes while exercising;

do not wear loose clothes that could become

caught on the elliptical. Always wear athletic

shoes for foot protection while exercising.

10. Hold the handlebars or the upper body

arms when mounting, dismounting, or using

the elliptical.

11. The pulse sensor is not a medical device.

Various factors may affect the accuracy of

heart rate readings. The pulse sensor is

intended only as an exercise aid in

determining heart rate trends in general.

12. The elliptical does not have a freewheel;

the pedals will continue to move until the

ywheel stops. Reduce your pedaling speed

in a controlled way.

13. Keep your back straight while using the

elliptical; do not arch your back.

14. Over exercising may result in serious injury

or death. If you feel faint or if you experience

pain while exercising, stop immediately and

cool down.

WARNING : To reduce the risk of serious injury, read all important precautions and

instructions in this manual and all warnings on your elliptical before using your elliptical. ICON

assumes no responsibility for personal injury or property damage sustained by or through the

use of this product.

BEFORE YOU BEGIN

Thank you for purchasing the ProForm®. The el-

liptical provides an array of features designed to

make your workouts at home more effective and

enjoyable.

For your benet, read this manual carefully be-

fore you use the elliptical. If you have questions

after reading this manual, please see the front

cover of this manual. To help us assist you, note

the product model

number and serial number before contacting us.

The model number is PFIVEL83712.0 and the lo-

cation of the serial number decal are shown on the

front cover of this manual.

Before reading further, please familiarize yourself

with the parts that are labeled in the drawing be-

low.

115 Kg

ENGLISH

115 Kg

WARNING DECAL PLACEMENT

This drawing shows the location(s) of

the warning decal(s). If a decal is miss-

ing or illegible, call the telephone num-

ber on the front cover of this manual

and request a free replacement decal.

Apply the decal in the location shown.

Note: The decal(s) may not be shown

at actual size.

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and re-

move the packing materials. Do not dispose of the packing materials until assembly is completed.

In addition to the included tool(s), assembly requires a Phillips screwdriver and

an adjustable wrench.

As you assemble the exercice bike, use the drawings below to identify small parts. The number in

parentheses below each drawing is the key number of the part, from the PART LIST near the end of

this manual. The number following the parentheses is the quantity needed for assembly.

Note: If a part is not in the hardware kit, check to see if it has been preassembled.

STEP 1

1. Tighten the front bottom tube(23) to the

mainframe(1) with inner hexagon bolt (21)arc

washer (20).

2. Tighten the rear bottom tube(3) to the main-

frame (1) with inner hexagon bolt (4) arc washer

(33).

STEP 2

Firstly put the protective guard (49) to the handlebar

post (46).Then connect the connection wire (50) to

the sensor wire(53), lastly tighten the handlebar

post(46) to the mainframe(1) with Inner hexagon

bolt(45)spring washerd (44)at washer(12).

STEP 3

1. Attach the L/R Swing tube (24L/R) to the shaft

(51) on Handlebar post (46) with Inner hexagon

bolt (10),Spring washer (11) D-shape washer(9)

and Wave washers (35), But don’t tighten them

rst.

2. Tighten the L/R pedal tube joint (39) to the L/R

crank (56L/R) with Inner hexagon bolt (10), Spring

washer (11), D-shape washer (9) and Wave wash-

er (35), but don’t tighten them rst.

3. Connect the Swing tube (24L/R) and Pedal sup-

port (15L/R) with Bolt (18),Flat washer (52), and

Nylon nut (6).Then tighten the Inner hexagon bolt

(10) and Bolt (18)

4. Attach the L/R handlebar (28L/R) on the L/R

Swing tube (24L/R) with Carriage bolt (36), Arc

washer (20) and Nylon nut (13).

STEP 4

Tighten the L/R pedal (14L/R) to the L/R pedal support

(15L/R) with Hexagon boltM8×45 (37) at washer (12)

nylon nut M8 (13).

STEP 5

1. Pass the pulse wire(43) out of

the hole of handlebar post (46) and

then out of the hole of computer brack-

et. As the photograph show.

2. Tighten the xed handlebar(42)

to the handlebar post(46) with inner

hexagon boltM8X16 (45) spring wash-

erd (44).

STEP 6

1. Fix the joint part of L/R handlebar

(28L/R) and L/R swing tube(24L/R) with pro-

tective guard(26a/b) protective guard(55a/b),

then tighten them with screwST3.5X10(27).

2. Tighten the protective guard (17L/R)

to the L/R pedal support (15L/R) with screw

ST4.2X18 (34).

3. Tighten the protective guard (54a/b) to

the L/R pedal tube joint (39L/R) with screw-

M5X10 (16).

STEP 7

1. Connect the connection wire

(50) pulse wire(43) to the computer

wires, then x the computer (31) to

the computer bracket in the handle-

bar post(46), lastly tighten the com-

puter with screw M4X12 (57) at

washer D5(48).

2. Tighten protective guard

(32/47) to the handlebar post (46)

with screwST4.2X18 (34).

Note: Before tighten the protective

guard (34), please move the con-

nection wire (50) and pulse wire

(43)away to the hole of handlebar

post(46) to avoid the wire are locked

by screw (34).

3. Insert one side of adapter (58) into

the tail of the elliptical, and another

plug insert to power supply.

Now, your machine is ready to use.

HOW TO EXERCISE ON THE ELLIPTICAL

EXERCISER

To mount the elliptical exerciser, hold the upper body

arms and step onto the pedal that is in the lowest

position. Then, step onto the other pedal. Push the

pedals until they begin to move with a continuous

motion.

Note: The pedal discs can turn in either direction. It is

recommended that you move the pedal discs in the

direction shown by the arrow;

however, for variety, you may turn the pedal discs

in the opposite direction.

The upper body arms are designed to add upper-

body exercise to your workouts. As you exercise,

push and pull the upper body arms to work your

arms, shoulders, and back. To focus on lower-body

exercise, hold the upper body arms but do not push

or pull them as you exercise.

To dismount the elliptical exerciser, wait until the

pedals come to a complete stop. Note: The elliptical

exerciser does not have a free wheel; the pedals

will continue to move until the ywheel stops.

When the pedals are stationary, step off the highest

pedal rst. Then, step off the lower pedal.

MEASURE YOUR HEART RATE IF DESIRED

You can measure you heart rate using either the

handgrip pulse sensor or the optional chest pulse

sensor.

Note: If you hold the handgrip pulse sensor and

wear the chest pulse sensor at the same time, the

console will not display your heart rate accurately.

If there are sheets of clear plastic on the metal

contacts on the handgrip pulse sensor, remove

the plastic. In addition, make sure that your hands

are clean. To measure your heart rate, hold the

handgrip pulse sensor with your palms resting

against the metal contacts. Avoid moving your

hands or gripping the contacts tightly.

When you are nished exercising

If the pedals do not move for several minutes and

the buttons are not pressed, the console will turn

off and the display will be resetéconomies des piles.

HOW TO USE THE ELLIPTICAL

Contacts

IInspect and tighten all parts of the exercise cycle

regularly.

Replace any worn parts immediately.

To clean the exercise cycle, use a damp cloth and a

small amount of mild detergent.

Important: To avoid damaging the console, keep

liquids away from the console and keep the console

out of direct sunlight.

MAINTENANCE AND TROUBLESHOOTING

Follow your progress with the display.

The console has a large touch screen that shows the

following workout information:

Speed—This display shows your pedaling speed,

in revolutions per minute (rpm).

Time—This display shows the elapsed time.

Note: When a smart program is selected, the display

will show the time remaining in the program

instead of the elapsed time.

Distance—This display shows the distance you

have pedaled, in total revolutions.

Calories—This display shows the approximate

number of calories you have burnt.

Pulse—This display shows your heart rate when

you use the handgrip pulse sensor.

Watts—This display shows the watts you developed

during the workout.

HOW TO USE THE CONSOLE

Make sure that the adapter is plugged. (see page 8 HOW

TO PLUG THE POWER ADAPTER). If there is a sheet of

clear plastic on the face of the console, remove it.

1. Turn on the console

To turn on the console, press any button on the console

or simply begin pedaling.

2. Press the touch screen buttons :

ENTER :

Pressing ENTER, in order to validate the data.

UP and DOWN :

By pressing these buttons, you will increase or decrease

the value during the preset or to adjust the resistance.

START/STOP:

For a quick start, press this button to start the counting of

the console, it will start from 0.

RECOVERY :

Press this button to use the Pulse recovery test (only

available at the end of a program).

3. Start pedaling and follow your progress with the

display :

While you exercise, the console will display the selected

mode.

4. When you are nished exercising, the console will

automatically turn off

If the pedals do not move for a few seconds, the word

STOP will appear in the display, and the console will turn

off.

At the end of a program, you will hear a tone and the

program will ash.

HOW TO USE THE PULSE RECOVERY TEST :

It is a function to check the condition of pulse recovery

that is scaled from 1.0 to 6.0 while 1.0 means the best

and 6.0 means the worst and the increment is 0.1. In

order to get rated correctly, users must test it right after

the workout nished by pressing “TEST RECOVERY ”

key and then stop exercising. After the key is pressed,

please also apply the heart rate detector appropriately,

the test will last for 1 minute and the result will show in

the display. If the computer does not detect your current

heart rate, pressing “TEST RECOVERY ” will not enter

into pulse recovery test. During the pulse recovery test,

press “TEST RECOVERY ” to exit the test and return to

the stop status.

HOW TO USE THE MANUAL MODE

1. Turn on the console.

To turn on the console,press any button on the console

or simply begin pedaling. The entire display will light for a

moment; the console will then be ready for use.

2. Select the manual program

When you turn on the console, the word MANUAL will

ash on the display.

if not press ENTER during 3 secondes and it will reset the

computer.

When MANUAL is ashing, press ENTER in order to

select it.

3. Entering your datas

Time is ashing, use UP and DOWN to select the value

and press ENTER.

Distance will ash, set the value on the same way and

press enter to validate. Do the same for Calories and

finally press START / STOP to begin the program.

For a quicker start, press the Quick start button and start

pedaling.

4. Change the resistance of the pedals as

desired.

CONSOLE FEATURES

As you pedal, change the resistance of the pedals by

pressing the Resistance increase and decrease buttons.

There are sixteen resistance levels. Note: After you’ve

pressed the buttons, it will take a moment for the pedals

to reach the selected resistance level.

5. Follow your progress with the display.

The console displays the elapsed time and the distance

you’ve pedaled. Note: When a smart program is selected,

the display will show the time remaining in the program

instead of the elapsed time.It also displays your pedaling

speed (in RPM), the calories and fat calories you’ve burnt

and also your heart rate when you use the handgrip pulse

sensor.

6. Measure your heart rate if desired.

see HOW TO MEASURE YOUR HEART RATE page 8

7. When you are nished exercising, the console will

automatically turn to sleeping mode

If the pedals do not move for a few seconds the console

will turn to sleeping mode. If the pedals do not move and

the console buttons are not pressed for a few minutes,

the temperature will appear on the display and then the

console will automatically turn off.

HOW TO USE THE PRESET PROGRAMS :

1. Turn on the console.

To turn on the console,press any button on the console

or simply begin pedaling. The entire display will light for a

moment; the console will then be ready for use.

2. Select a program

When you turn on the console, the word MANUAL will

ash on the display.

Press Up or DOWN in order to select the program, select

it according to your goals and to the prole shown on the

display. Press ENTER to validate.

Note : Programs 2, 3, 4, 6 and 7 being Performance

programs and programs 1, 5, 8, 9 and 10 being

Endurance programs.

Consult a coach for more details on the selection and

use of a program.

The prole will ash on the display.

3. Entering your datas

You’ll then be able to choose the goal of your workout :

time, distance and calorie.

Select the data with UP and DOWN then press ENTER.

Do the same for Distance and Calories, Then, press

START/STOP to start.

For a quicker start, press the Quick start button and start

pedaling.

4. Change the resistance of the pedals as

desired.

As you pedal, change the resistance of the pedals by

pressing the Resistance increase and decrease buttons.

There are sixteen resistance levels. Note: After you’ve

pressed the buttons, it will take a moment for the pedals

to reach the selected resistance level.

5. When you are nished exercising, the console will

automatically turn off

If the pedals do not move for a few seconds the console

will turn off.

At the end of a program, you will hear a tone and the

program will ash.

WATT PROGRAM :

1. Turn on the console.

To turn on the console,press any button on the console

or simply begin pedaling. The entire display will light for a

moment; the console will then be ready for use.

2. Select a Watt program

When you turn on the console, the word MANUAL will

ash on the display.

Press Up or DOWN in order to select the program WATT.

The WATT will ash on the display. Press ENTER to

validate.

3. Entering your datas

You’ll then be able to choose the goal of your workout :

time, distance and calorie.

Select the data with UP and DOWN then press ENTER.

Do the same for Distance, Calories and WATT, Then,

press START/STOP to start.

NOTE : Since this program is based on your speed, you

cannot change the resistance of the pedals as desired.

4. When you are nished exercising, the console will

automatically turn off

If the pedals do not move for a few seconds the console

will turn off.

At the end of a program, you will hear a tone and the

program will ash.

HEART RATE CONTROL PROGRAMS :

1. Turn on the console.

To turn on the console,press any button on the console

or simply begin pedaling. The entire display will light for a

moment; the console will then be ready for use.

2. Select a Heart Rate program

When you turn on the console, the word MANUAL will

ash on the display.

Press Up or DOWN in order to select one program Heart

Rate. The HR program will ash on the display. Press

ENTER to validate.

Press UP and DOWN to choose your heart rate goal

(55%, 75% ou 90% of your maximum heart rate or your

precise goal TARGET HR)

The HRC is calculated as follow : 220- your age. Fr

instance, for a person of 35 years old : 220-35 = 185

pulse/min.

3. Entering your datas

You’ll then be able to choose the goal of your workout :

time, distance and calorie.

Select the data with UP and DOWN then press ENTER.

Do the same for Distance, Calories and AGE, Then,

press START/STOP to start.

Note :Take care to provide the right AGE in order to

calculate correclty the % of maximum Heart Rate

During your heart rate control program you cannot

modify the resistance, the level of resistance changes

automatically forcing you to reach your heart rate goal.

Note : You have to leave your hands on the contacts.

5. When you are nished exercising, the console will

automatically turn off

If the pedals do not move for a few seconds, the word

STOP will appear in the display, and the console will turn

off. At the end of a program, you will hear a tone and the

program will ash.

USER SETTING PROGRAMS :

1. Turn on the console.

To turn on the console,press any button on the console

or simply begin pedaling. The entire display will light for a

moment; the console will then be ready for use.

2. Select a Custom program

When you turn on the console, the word MANUAL will

ash on the display.

Press Up or DOWN in order to select the custom program

you want. Press ENTER to validate.

3. Enter your data

Time is ashing, use UP and DOWN to select the value

and press ENTER. Distance will ash, set the value on

the same way and press enter to validate. Do the same

for Calories.

The user is now free to modify the values of resistance,

there are 16 levels of resistance. This prole will be

saved in the console after the set up. Once your program

is selected and after having pressed the ENTER button,

the rst column start ashing and you can press up and

down to increase or decrease the values and create your

prole. Press ENTER to validate the value.

You will then

be able to adjust the values for the second column and so

on. Do the same for the 10 columns. Then, press START/

STOP to start.

5. When you are nished exercising, the console will

automatically turn off

If the pedals do not move for a few seconds, the word

STOP will appear in the display, and the console will turn

off.

At the end of a program, you will hear a tone and the

program will ash.

BODYFAT TEST :

1. Turn on the console

To turn on the console, press any button on the

console or simply begin pedaling.

2.Select the body Fat Test

Press the UP and DOWN button to select the Body

Fat program. Wait until the FAT begin ashing.

Press the ENTER button to validate. This is a

special test designed to calculate users’ body fat

pourcentage (FAT%), Base Metabolic Rate (BMR),

Body Mass Index (BMI) and provide you a body

Type.

3.Entering your datas

Height is ashing, adjust to your size with the button

Up and Down and then validate with ENTER.

Adjust in the same way the value of WEIGTH, AGE,

SEX and validate each time by pressing ENTER.

Then, press the ST/SP button in order to start to

calculate.

During the body fat measurement, place both your

palms on the contact pads. The test

result are:

FAT%: The total body fat in our body measured by

percentage

BMR Basal Metabolic Rate (metabolism) is the

energy (measured in calories) expended

by the body at rest to maintain normal bodily

function.

BMI: means Body Mass Index, which is used for

body shape building.

During the body fat measurement, if your palms

do not contact the pulse sensor well, the computer

cannot receive any signal and it will display

ERROR2. Press START/STOP to try again.

During the test, you cannot exit the test when press

any button. After the test nish, press UP, DOWN to

exit the body fat measurement program and switch

to other program.

Slim Healthy Fleshy

Over WT

Obese

BODY1 BODY2 BODY3 BODY4 BODY5

＜14% 14%～20% 20.1%～25% 25.1%～35% ＞35%

＜17% 17%～23% 23.1%～28% 28.1%～38% ＞38%

Female/≤30 years old ＜17% 17%～24% 24.1%～30% 30.1%～40% ＞40%

＜20% 20%～27% 27.1%～33% 33.1%～43% ＞43%

Body Shape

FAT%

Age/

Gender

Male/≤30 years old

Male/＞30 years old

Female/＞30 years old

EXERCISE GUIDELINES

WARNING:

Before beginning this or any exercise pro-

gram, consult your physician. This is espe-

cially important for persons over the age of 35

or persons with pre-existing health problems.

The pulse sensor is not a medical device. Vari-

ous factors may affect the accuracy of heart

rate readings. The pulse sensor is intended

only as an exercise aid in determining heart

rate trends in general.

These guidelines will help you to plan your exercise

program. For detailed exercise information, obtain a

reputable book or consult your physician. Remember,

proper nutrition and adequate rest are essential for

successful results.

EXERCISE INTENSITY

Whether your goal is to burn fat or to strengthen your

cardiovascular system, exercising at the proper in-

tensity is the key to achieving results. You can use

your heart rate as a guide to nd the proper intensity

level. The chart below shows recommended heart

rates for fat burning and aerobic exercise.

To nd the proper intensity level, nd your age at the

bottom of the chart (ages are rounded off to the near-

est ten years). The three numbers listed above your

age dene your “training zone.” The lowest number is

the heart rate for fat burning, the middle number is

the heart rate for maximum fat burning, and the high-

est number is the heart rate for aerobic exercise.

Burning Fat—To burn fat effectively, you must exer-

cise at a low intensity level for a sustained period of

time. During the rst few minutes of exercise, your

body uses carbohydrate calories for energy. Only af-

ter the rst few minutes of exercise does your body

begin to use stored fat calories for energy. If your

goal is to burn fat, adjust the intensity of your exer-

cise until your heart rate is near the lowest number in

your training one. For maximum fat burning, exercise

with your heart rate near the middle number in your

training zone.

Aerobic Exercise—If your goal is to strengthen your

cardiovascular system, you must perform aerobic

exercise, which is activity that requires large amounts

of oxygen for prolonged periods of time. For aerobic

exercise, adjust the intensity of your exercise until

your heart rate is near the highest number in your

training zone.

WORKOUT GUIDELINES

Warming Up—Start with 5 to 10 minutes of stretching

and light exercise. A warm-up increases your body

temperature, heart rate, and circulation in prepara-

tion for exercise.

Training Zone Exercise—Exercise for 20 to 30 min-

utes with your heart rate in your training zone. (During

he rst few weeks of your exercise program, do not

keep your heart rate in your training zone for longer

than 20 minutes.) Breathe regularly and deeply as

you exercise–never hold your breath.

Cooling Down—Finish with 5 to 10 minutes of

stretching. Stretching increases the exibility of your

muscles and helps to prevent post-exercise prob-

lems.

EXERCISE FREQUENCY

To maintain or improve your condition, complete three

workouts each week, with at least one day of rest

between workouts. After a few months of regular ex-

ercise, you may complete up to ve workouts each

week, if desired. Remember, the key to success is to

make exercise a regular and enjoyable part of your

everyday life.

EXPLODED DRAWING—Model No. PFIVEL87312.0 part 1

EXPLODED DRAWING—Model No. PFIVEL87312.0 part 2

PART LIST—Model No. PFIVEL87312.0

Item

Description

Long axle

Flat washerD12×Φ24×1.5

Sensor wire

Protective guard

L/R crank

ScrewM4X12

Adapter

ScrewM4X18

Motor

Tension wire

Magnet

L/R chain cover

Turn plate cover

Turn plate

Spring washersD12

Magnet

Magnet board

Spring

Magnet axle

Hexagon boltM6X15

Spring washerD6

Flat washerD6×Φ12×1.5

Spring washerD20

Bearing

Inner hexagon boltM6X15

Belt pulley

Belt

Chain wheel axle joint

Nylon nut M6

Nut cover

Hexagon boltM5X60

Hexagon nut M6

Hexagon nut M10x1

Hexagon nut M6

Sensor

ScrewST3X10

Hexagon boltM10×1

Hinge screwM6×50

U board

Flat washerd5×Ф12×1.5

Flywheel axle

BoltM10×1

Flywheel

Sleeve D10×3

Qty.

Item

Description

Mainframe

End cap

Rear bottom tube

Inner hexagon boltM8×90

Flat washer D10×Φ20×2

Nylon nut M10

Plastic bushingΦ28×16×Φ16.1

BushingΦ18×Φ10×11

D-shape washerΦ28×Φ16.2×14×B5

Inner hexagon boltM10X20

Spring washer d10

Flat washerD8×Φ16×1.5

Nylon nutM8

L/R pedal

L/R pedal support

ScrewM5X10

protective guard

BoltΦ12×M10×80

Bushing3(Φ12×Φ32×15)

Arc washerD8×Φ19×1.5×R30

Inner hexagon boltM8×72

End cap

Front bottom tube

L/R swing tube

Bushin4(Φ16×Φ31×23)

Protective guard

ScrewST3.5X10

L/R handlebar

Foam grip

End cap

Computer

Protective guard

Arc washerd8×2×Φ25×R39

ScrewST4.2X18

Wave washers

Carriage boltM8×45

Hexagon boltM8×45

Hexagon boltM10×55

L/R pedal tube joint

End cap

Foam grip

Fixed handlebar

Pulse wire

Spring washerd8

Inner hexagon boltM8X16

Handlebar post

Protective guard

Flat washerD5

Protective guard

Connection wire

Qty.

ORDERING REPLACEMENT PARTS

To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to

provide the following information when contacting us:

• the model number and serial number of the product (see the front cover of this manual)

• the name of the product (see the front cover of this manual)

• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED

DRAWING near the end of this manual)

IMPORTANT RECYCLING INFORMATION FOR E. U. CUSTOMERS

This electronic product must not be disposed of in municipal waste. To preserve

the environment, this product must be recycled after its useful life as required by

law. Please use recycling facilities that are authorized to collect this type of waste in

your area. In doing so, you will help to conserve natural resources and improve

European standards of environmental protection. If you require more information about

safe and correct disposal methods, please contact your local city ofce or the

establishment where you purchased this product.

TECHNICAL SPECS.

Product dimensions : (L x l x h) : 128 x 62 x 165 cm

Product weight: 35 Kg

ProForm PFIVEL83712 Owner's manual

Brand: ProForm

Model: PFIVEL83712

Category: Fitness, gymnastics & weight training

Type: Owner's manual

Download PDF

report

ProForm PFIVEL83712 Owner's manual

ProForm PFIVEL83712 Owner's manual

Related papers

Other documents