Akura ALED2411EFDU User guide

Brand: Akura

Model: ALED2411EFDU

Type: User guide

Akura ALED2411EFDU is a versatile TV with a range of features to enhance your viewing experience. Enjoy crystal-clear visuals and immersive sound with its built-in digital and analog TV tuner. Connect external devices like DVD players or gaming consoles with ease using its multiple ports. The PVR recording functionality lets you pause, rewind, and record your favorite shows, providing flexibility and convenience. Its compact size and stylish design make it an ideal choice for any room in your home. Akura ALED2411EFDU – where entertainment comes to life!

GETTING STARTED

1. Please read the safety section (page 2) in the main instructions before proceeding further. This section

contains vital information to ensure safe positioning and use of the TV

2. Unpack the TV and place on a flat level surface suitable to support the weight of the TV (4.85 kg approx.).

3. Remove the plastic protective film on the front of the screen.

4. Connect the aerial into the TV Tuner connector at the left side of the TV (Fig 3).

Fig.2

Fig.3

5. Connect the mains power lead to the mains adaptor and insert the DC jack into

the DC-INPUT socket at the underside side of the TV (Fig 2). Plug in and switch

on at the mains. The LED indicator on the TV will illuminate and show red (Fig

1).

6. Open the battery compartment cover (Fig 3) on the reverse of the remote

control. Insert 2 x AAA 1.5V alkaline batteries in accordance with the diagram in

the battery compartment. Take care to observe the correct polarity (+/-). Refit

the battery compartment cover

7. Press the POWER button (Fig 5) to turn the TV set on. The LED indicator will

turn green and after a few seconds, the screen will activate and the first time

installation menu (Fig. 6) will appear.

8. Use the cursor ▼/▲ buttons on the remote control to move up and down the

display to highlight desired options.

9. The default language is “English” if you want another language select that

language using the ►/◄ buttons and press Ok.

10. Select YES to start tuning and press Ok. Fig 7 and 8 will be displayed. The TV

will now search the entire UHF range for both Digital and Analog TV stations.

When search is complete the TV will display the first channel (BBC1) in DVBt

mode. The Analog stations may not be in the correct order, see page16 in the

Main Instruction book for more information

Fig.4

Fig 1

ALED2411E FDU

Quick Start Guide

Fig.6

Fig.7

WATCHING TV (basic operation)

11. To select a channel either enter the number of the channel using the number

buttons on the remote control or scroll through the channels using the channel

CH+/- buttons.

12. To view analogue TV channels press the SOURCE button to display the source

menu. Using the cursor ▲ / ▼ buttons highlight TV on the menu and press OK to

select. To view digital TV channels select DTV on this same menu.

13. To check the list of channels stored, press the “OK” button to display the channel

list and use the cursor ▲ / ▼ buttons to move up and down the display. To select

a channel, highlight the channel on the list and press “OK” to confirm.

14. Adjust the volume to the desired level using the volume or cursor ◄ / ►buttons.

The sound can be silenced by pressing the MUTE button on the remote control

and a mute symbol will appear on the screen. Press the MUTE button a second

time to restore the sound.

15. To switch off the TV for short periods, press the POWER button. The TV will go

into standby mode and the LED indicator will change to red. If not using the TV

for extended periods turn off at the mains switch to conserve electricity, all

settings will be retained.

Fig.5

Fig.8

For advanced operation of this TV and PVR recorder please consult the Instruction Manual.

Should you have difficulty in operating this unit, please consult the Trouble Shooting Guide

in the Instruction Manual. If you suspect a fault, please contact the Customer Help Line,

details of which can be found in the Instruction Manual.

Base fitting and removal.

Place the TV face

down on a suitable

surface with the

base mounting

facing towards you

(Fig 1).

Place the base plate onto the TV. Press the base until the “Tabs” click into

place.

To remove the base plate, press the tabs gently towards the centre.

If wall mounting the TV see page 20 in the Main Instruction book.

Fig 1

Fig2

Model : ALED2411E FDU

Cabinet Front

Akura ALED2411EFDU User guide

Akura ALED2411EFDU User guide

Akura ALED2411EFDU User guide

Related papers