Lowrance HDS-5 Gen2 Template

Type
Template

This manual is also suitable for

Ø1.50 [Ø38.1]
HOLE SAW 4 PLS.
5.79
[147.0]
6.57 [166.8]
5.12
[130.0]
5.05
[128.3]
Ø.12 [#31 DRILL]
FOR SELF TAPPING HOLE
(MATERIAL DEPENDENT)
4 PLS.
TOP
Surface area needed to mount unit without cover
Part. 988-0176-13A
Cut on this line
This template can be printed on
letter, A4, or larger size paper.
Printing instructions:
1. After selecting File | Print, the printer
settings page will appear.
2. Set Page Scaling toNone.”
3. Select Choose Paper Source by PDF page
size.”
4. Print the document.
This template can only be used
for HDS-5x and HDS-5 units.
VERIFY TEMPLATE DIMENSIONS BEFORE CUTTING ANY HOLES IN YOUR VESSEL
  • Page 1 1

Lowrance HDS-5 Gen2 Template

Type
Template
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI