Contec AI-1004LY-WQ-EU Reference guide

Type
Reference guide

This manual is also suitable for

Reference Manual
Wireless I/O Series
CONTENTS
4ch Analog Input Terminal for Sub-GHz Wireless
EU model
AI-1004LY-WQ-EU
USA model
AI-1004LY-WQ-US
Introduction .................................................................. 4
Safety Precautions .................................................... 11
Setup ............................................................................. 18
Connecting and Installing ..................................... 34
About Software ......................................................... 49
Function Description ............................................... 52
Appendix ...................................................................... 56
Customer Support and Inquiry ............................ 62
2
Table of Contents
Introduction ....................................................................... 4
1. Related Manuals ...................................................................................................................................................... 5
2. About the Product .................................................................................................................................................. 6
3. Features ...................................................................................................................................................................... 7
4. Product Configuration List .................................................................................................................................. 8
5. Support Software .................................................................................................................................................... 9
6. Optional Products ............................................................................................................................................... 10
Safety Precautions ........................................................... 11
1. Safety Information............................................................................................................................................... 12
2. Handling Precautions ......................................................................................................................................... 13
1. FCC PART15 ..................................................................................................................................................... 14
2. FCC PART15 Subpart B ................................................................................................................................ 14
3. FCC PART15 Subpart C ................................................................................................................................ 15
3. About listed transfer rate ................................................................................................................................. 16
4. Usage limitation ................................................................................................................................................... 16
5. Environment .......................................................................................................................................................... 16
6. Inspection ............................................................................................................................................................... 17
7. Storage ..................................................................................................................................................................... 17
8. Disposal ................................................................................................................................................................... 17
Setup ................................................................................. 18
1. What is Setup? ...................................................................................................................................................... 19
1. Using the Driver Library API-AIO(WDM) under Windows ............................................................ 19
2. Step 1 Installing the Software ......................................................................................................................... 20
1. Start up installing program ....................................................................................................................... 20
3. Step 2 Setting the Hardware ........................................................................................................................... 21
1. Product Nomenclature................................................................................................................................ 21
2. Name and Function ...................................................................................................................................... 22
3. Network Setting............................................................................................................................................. 25
4. Step 3 Installing the Hardware ....................................................................................................................... 26
1. Hardware installation................................................................................................................................... 26
5. Step 4 Initializing the Software ...................................................................................................................... 27
1. Setting Procedure ......................................................................................................................................... 27
6. Step 5 Operation Checks .................................................................................................................................. 29
1. Check Method ................................................................................................................................................ 29
2. Using the Diagnosis Program .................................................................................................................. 29
7. Troubleshooting ................................................................................................................................................... 32
1. Symptoms and Actions ............................................................................................................................... 32
2. When the Product Will Not Start Even After Trying the Above Actions .................................. 33
3. When the problem is not solved ............................................................................................................ 33
3
Table of Contents
Connecting and Installing............................................... 34
1. Connecting an antenna ..................................................................................................................................... 35
2. Connecting the external power ..................................................................................................................... 36
3. Analog input connection .................................................................................................................................. 38
1. How to connect the interface connector ............................................................................................. 38
2. Interface Connector ..................................................................................................................................... 39
3. Input signal connection .............................................................................................................................. 40
4. Installation Conditions ....................................................................................................................................... 41
5. Installation in a Network ................................................................................................................................... 43
1. Features of the Wireless Network .......................................................................................................... 43
2. Operating Environment and Radio Waves .......................................................................................... 44
3. Constructing a Network ............................................................................................................................. 46
About Software ................................................................ 49
1. About Windows Software ................................................................................................................................ 50
1. How to find a Help File ............................................................................................................................... 50
2. How to update firmware ............................................................................................................................ 50
Function Description ....................................................... 52
1. Mesh ......................................................................................................................................................................... 53
2. Analog Input Function ....................................................................................................................................... 54
1. Conversion conditions ................................................................................................................................ 54
Appendix .......................................................................... 56
1. About Hardware ................................................................................................................................................... 57
1. Function Specifications ............................................................................................................................... 57
2. Environmental Specifications ................................................................................................................... 58
2. Physical Dimensions ........................................................................................................................................... 59
3. Antenna Directivity.............................................................................................................................................. 60
1. AI-1004LY-WQ-EU ........................................................................................................................................ 60
2. AI-1004LY-WQ-US ........................................................................................................................................ 60
Customer Support and Inquiry ...................................... 62
1. Services .................................................................................................................................................................... 63
4
Introduction
This section provides necessary information of the product
such as the outline, bundled items and manuals before
actual use.
Introduction
AI-1004LY-WQ-EU, AI-1004LY-WQ-US Reference Manual
5
1. Related Manuals
The manuals related to the product are listed below.
Read them as necessary along with this document.
Must Read the Followings.
Name
Purpose
Contents
How to get
Setup Manual
Read this when setting up the
product.
This describes the required items for
setup and configuration procedure.
Included in the package
(Printed matter)
Reference Manual
(this document)
Read this when operating the
product.
This describes the hardware aspects
such as functions and settings.
Download Manuals
Download the manuals accordingly from the following URL.
Download
https://www.contec.com/ download/
Introduction
AI-1004LY-WQ-EU, AI-1004LY-WQ-US Reference Manual
6
2. About the Product
This product is an analog input terminal that sends input analog signals wirelessly in the Sub-GHz
band. *1 Data is sent to Ethernet gateway (Master) of the Wireless I/O series.
With strength against obstacles, capability of long-distance communications in the Sub-GHz band,
and mesh support, it is suitable to control or monitor devices that are spread in the wide area.
4 channels of 10-bit non-isolated analog input are equipped to support ±10V bipolar input. This
product provides excellent cost performance afforded by focusing on solely analog input function.
With the provided driver library API-AIO(WDM), you can create application software for Windows
using various programming languages supporting Win32 API functions such as Visual Basic and
Visual C ++.
* This product should always be used along with the Wireless I/O series Ethernet gateway (Master).
* Driver library can be downloaded from the Contec website.
* AI-1004LY-WQ-US can be used in the United States. AI-1004LY-WQ-EU can be used in European
countries.
*1 Sub-GHz indicates frequency bands of 1GHz and below. Available frequency band of the product
depends on the model. The AI-1004LY-WQ-EU can be used in the 868MHz band (Europe), and the
AI-1004LY-WQ-US can be used in the 915MHz band (The United States).
Introduction
AI-1004LY-WQ-EU, AI-1004LY-WQ-US Reference Manual
7
3. Features
Supports Sub-GHz band wireless with excellent
transmission distance
This product converts the input signals wirelessly in the Sub-GHz band and transmits to the gateway. From the LAN port of a PC, analog
signals (±10V) can be easily input via the gateway.
The Sub-GHz, with the good wraparound characteristics of radio waves, the transmission distance (about 1 km) can be extended even
there are obstacles. Stable communication can be achieved even in the environment where radio waves are mixed. As the product is
suitable for long distance communication, network can be constructed on the wide area in the facilities without cable wiring.
Highly reliable mesh communication
With wireless mesh technology, the communication continues by changing the routes automatically even when disconnection occurs,
for example. Communication stability enables the wireless network to be strong against obstacles.
Adaptable to a wide range of temperature
This product is capable of operating in the temperature between -20 and + 60°C. It can be installed in the various environments.
Compact design
Compact design, 62.0(W) x 64.0(D) x 24.0(H)mm features flexibility in installation.
Easy mounting on DIN rail
This product can be mounted on DIN rail with an optional fixing bracket.
Capable of adapting a wide-range power
This product is capable of dealing with a wide range of power in the differing environments.
4-channel analog input
4 channels of analog input with ±10V range, single-ended, and 10-bit resolution can be performed.
No adjustment for analog input
This product does not require analog input adjustment.
Even the ambient temperature is -20 ° C or + 60 ° C, sampling with accuracy of ± 10 LSB can be carried out without adjustment.
Introduction
AI-1004LY-WQ-EU, AI-1004LY-WQ-US Reference Manual
8
4. Product Configuration List
The product consists of the items listed below.
Check, with the following list, that your package is complete.
If you discover damaged or missing items, contact your retailer.
AI-1004LY-WQ-EU
Product…1
Setup Guide…1
Warranty Certificate…1
Serial Number Label…1
Power connector (3pin) …1
Interface Connector…1
Antenna…1
AI-1004LY-WQ-US
Product…1
Setup Guide…1
Warranty Certificate…1
Serial Number Label…1
Power connector (3pin) …1
Interface Connector…1
Antenna…1
Introduction
AI-1004LY-WQ-EU, AI-1004LY-WQ-US Reference Manual
9
5. Support Software
You can use CONTEC support software according to your purpose and development environment.
For more details on the supported OS, applicable languages, or to download the latest version of
software, visit the CONTEC Web site.
Name
Contents
How to get
Windows version of driver
library API-AIO(WDM)
Driver software with Win32API function (DLL) to
support the function is ready to use per terminal.
The driver software contains sample programs such as
VisualBasic and VisualC++, and the diagnosis program
to check the software operation.
Download from the
CONTEC website
Download the files from the following URL.
Download
https://www.contec.com/download/
Introduction
AI-1004LY-WQ-EU, AI-1004LY-WQ-US Reference Manual
10
6. Optional Products
Optional product items are as follows:
Acquire them as required.
Product Name
Model type
Description
AC Adaptor
POA201-10-2 *
1
Input : 90 - 264VAC, Output : 12VDC 1.0A
Bracket for Wireless I/O
Products
BRK-WQ-Y
Screw Terminal Connector
Set
CN6-Y141
14pin Screw Terminal Connector Set (6 pieces)
*1 The adaptor can be used in the temperature range between 0 and + 40°C. The support voltage of
AC cable is 125 VAC 7 A.
Visit the CONTEC website for the latest optional products.
Website
https://www.contec.com/
11
Safety Precautions
Understand the following definitions and precautions to
use the product safely.
Never fail to read them before using the product.
Safety Precautions
AI-1004LY-WQ-EU, AI-1004LY-WQ-US Reference Manual
12
1. Safety Information
This document provides safety information using the following symbols to prevent accidents
resulting in injury or death and the destruction of equipment and resources.
Understand the meanings of these labels to operate the equipment safely.
DANGER
Signal word used to indicate an imminently hazardous situation which,
if not avoided, will result in death or serious injury.
WARNING
Signal word used to indicate a potentially hazardous situation which,
if not avoided, could result in death or serious injury.
CAUTION
Signal word used to indicate a potentially hazardous situation which,
if not avoided, could result in minor or moderate injury.
Safety Precautions
AI-1004LY-WQ-EU, AI-1004LY-WQ-US Reference Manual
13
2. Handling Precautions
DANGER
Do not use the product in locations exposed to a flammable or corrosive gas. Bracket for Wireless
I/O Products.
CAUTION
This product contains precision electronic elements and must not be used in locations subject
to physical shock or strong vibration. Otherwise, the product may malfunction, overheat, or
cause a failure.
Do not use or store this product in high temperature or low temperature surroundings, or do
not expose it to extreme temperature changes. Otherwise, the product may malfunction,
overheat, or cause a failure.
Do not use or store this device where it is exposed to direct sunlight or near stoves or other
sources of heat. Otherwise, the product may malfunction, overheat, or cause a failure.
Do not use the product in the vicinity of devices that generate strong magnetic force or noise.
Otherwise, the product may malfunction, overheat, or cause a failure.
Do not turn on the power without first connecting the antenna. Otherwise, the product may
malfunction, overheat, or cause a failure. Before turning the power on, be sure to check
whether the antenna is securely connected.
The specifications of the product are subject to change without notice for enhancement and
quality improvement. Even when using the product continuously, be sure to read the manual
in the CONTEC's website and understand the contents. Do not modify the product. CONTEC
will bear no responsibility for any problems, etc., resulting from modifying the product.
Do not modify the product. CONTEC will bear no responsibility for any problems, etc.,
resulting from modifying the product.
The product must always be associated with the instruction manual.
When the product is used in a place that is affected by overcurrent or overvoltage (lightning
surge), select appropriate surge protection device for all of the route (Power line, earth, etc.).
Consult with the specialist regarding selecting, purchasing, and setting the surge protection
device.
Bringing this product too close to a metal/concrete wall (including steel frames) may cause
the communication quality to deteriorate.
If a wireless device that uses the same channel (wireless frequency) as this product exists in
the area where communication is possible, a drop in the transmission speed or
communication quality may occur in certain situations, which may make it impossible to
perform normal communication.
Modifications to the built-in wireless equipment are prohibited by law.
Safety Precautions
AI-1004LY-WQ-EU, AI-1004LY-WQ-US Reference Manual
14
In some medical institutions and laboratories, radio-sensitive precision instruments are used
and it may be prohibited to use radio equipment.
The use of antennas other than that included with the product is prohibited by law.
The radio waves used by this product pass through obstacles (such as walls) and reach all
locations within a given area. If the security settings are not configured, communication may
be intercepted by a third party.
This product is equipped with a security function, so be sure to configure the security settings
prior to use in order to reduce security problems.
This product may not perform normal wireless communication due to factors such as the
installation environment, the setup, and the communication load of the network.
Perform a verification in advance in an environment that matches your usage application to
check that there are no problems.
For the introduction and installation of this product, hire a system integrator or other
specialist who is well-versed in the construction of network systems.
When you are switching to this product from another model, it may be necessary to
reconstruct the network system due to differences in areas such as the product specifications
and functions.
When disposing of the product, follow the disposal procedures stipulated under the relevant
laws and municipal ordinances.
Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever
(Including damages for loss of business profits) arising out of the use or inability to use this
CONTEC product or the information contained herein.
1. FCC PART15
2. FCC PART15 Subpart B
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause
undesired operation.
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
NOTE
Safety Precautions
AI-1004LY-WQ-EU, AI-1004LY-WQ-US Reference Manual
15
3. FCC PART15 Subpart C
This transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment
and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment should be installed
and operated keeping the radiator at least 20cm or more away from persons body.
Safety Precautions
AI-1004LY-WQ-EU, AI-1004LY-WQ-US Reference Manual
16
3. About listed transfer rate
Data transfer speed listed in this guide or Utility is a theoretical maximum value and does not indicate
the actual data speed.
4. Usage limitation
This product has not been developed or manufactured to be used in systems including the
equipment which is directly related to human lives *1 or the equipment which involves human safety
and may significantly affect the maintenance of public functions *2. Therefore, do not use the product
for such purposes.
*1 Medical devices such as life-support equipment and devices used in an operating theater.
*2 Main control systems at nuclear power stations, safety maintenance systems at nuclear facilities,
other important safety-related systems, operation control systems within group transport systems,
air-traffic control systems, etc.
5. Environment
Use this product in the following environment. If used in an unauthorized environment, the product
may overheat, malfunction, or cause a failure.
Operating temperature
-20 - 60°C
Humidity
10 - 90%RH (No condensation)
Corrosive gases
None
Floating dust particles
Inspect the product periodically as follows to use it safely.
Safety Precautions
AI-1004LY-WQ-EU, AI-1004LY-WQ-US Reference Manual
17
6. Inspection
Inspect the product periodically as follows to use it safely.
7. Storage
When storing this product, keep it in its original packing form.
Put the product in the storage bag.
Wrap it in the packing material, and then put it in the box.
Store the package at room temperature at a place free from direct sunlight, moisture, shock,
vibration, magnetism, and static electricity.
8. Disposal
When disposing of the product, follow the disposal procedures stipulated under the relevant laws
and municipal ordinances.
Isolated Digital I/O
- Check that the connector
has no dust or foreign
matter adhering.
18
Setup
This section describes how to set up the product.
Setup
AI-1004LY-WQ-EU, AI-1004LY-WQ-US Reference Manual
19
1. What is Setup?
Setup means a series of steps to take before the product can be used.
Different steps are required for software and hardware.
The setup procedure varies with the OS and software used.
1. Using the Driver Library API-AIO(WDM) under
Windows
This section describes the setup procedure to be performed before you can start developing
application programs for the product using the “Driver Library API-AIO(WDM)”.
Taking the following steps sets up the software and hardware. You can use the diagnosis program
later to check whether the software and hardware function normally.
Step 1 Installing the Software (Page20)
Step 2 Setting the Hardware (Page21)
Step 3 Installing the Hardware (Page26)
Step 4 Initializing the Software (Page27)
Step 5 Operation Checks (Page29)
If Setup fails to be performed normally, see the Symptoms(Page32)” section at the end of this
chapter.
Setup
AI-1004LY-WQ-EU, AI-1004LY-WQ-US Reference Manual
20
2. Step 1 Installing the Software
This section describes how to install the driver library.
Install the driver library before connecting this product to your PC.
Although some user interfaces are different depending on the OS used, the basic procedure is the
same.
For the installation details of each OS, see the Help (APITOOL.chm) in the folder of the installed
development environment package that can be downloaded from the CONTEDC website.
1. Start up installing program
1 Download the API-AIO(WDM) from the CONTEC website.
2 Execute the downloaded file and it is automatically extracted.
3 Execute the installer in the extracted file. Refer to the following as the installer varies
depending on the OS.
OS other than Windows 10:
(Extracted file)\INF\WDM\Aio\Setup.exe
Windows 10:
(Extracted file)\INF\WDM\Aio_ForWin10.exe
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65

Contec AI-1004LY-WQ-EU Reference guide

Type
Reference guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI