e+p F 0 Datasheet

e+p
Brand
e+p
Model
F 0
Category
Coaxial connectors
Type
Datasheet

This manual is also suitable for

SB-Verpackung/blister lose/in bulk
F 0 F 0 L
SB-Verpackung/blister lose/in bulk
F 100 F 100 L
F-Stecker / F plugs
36
Kabelisolierung: ca. 4,8mm – Außenmantel: ca. 7,0mm
Inhalt SB-Verpackung: je 2 Stück
cable isolation: approx. 4,8mm – outer jacket: approx. 7,0mm
contents blister packing: each 2 pieces
Kabelisolierung: ca. 3,9mm – Außenmantel: ca. 6,1mm
Inhalt SB-Verpackung: 2 Stück
cable isolation: approx. 3,9mm – outer jacket: approx. 6,1mm
contents blister packing: 2 pieces
F-Stecker, schraubbar / F plug, twist-on type
F-Stecker, schraubbar / F plug, twist-on type
Kabelisolierung: ca. 3,3mm – Außenmantel: ca. 5,2mm
Inhalt SB-Verpackung: 2 Stück
cable isolation: approx. 3,3mm – outer jacket: approx. 5,2mm
contents blister packing: 2 pieces
Kabelisolierung: ca. 2,8mm – Außenmantel: ca. 4,0mm
Inhalt SB-Verpackung: 2 Stück
cable isolation: approx. 2,8mm – outer jacket: approx. 4,0mm
contents blister packing: 2 pieces
F-Stecker, schraubbar / F plug, twist-on type
F-Stecker, schraubbar / F plug, twist-on type
SB-Verpackung/blister lose/in bulk
F 1 F 1 L
SB-Verpackung/blister lose/in bulk
F 2 F 2 L
SB-Verpackung/blister lose/in bulk
F 3 F 3 L
~ 7,0mm
~ 6,1mm
~ 5,2mm
~ 4,0mm
Wasserdicht durch Gummiring. Kabelisolierung: ca. 4,8mm – Außenmantel: ca. 7,0mm
Inhalt SB-Verpackung: je 2 Stück
Waterproof by rubber ring. Cable isolation: approx. 4,8mm – outer jacket: approx. 7,0mm
contents blister packing: each 2 pieces
F-Stecker, schraubbar / F plug, twist-on type
~ 7,0mm
035_053_antenne 2010_rip 28.05.2010 11:29 Uhr Seite 2
  • Page 1 1

e+p F 0 Datasheet

e+p
Brand
e+p
Model
F 0
Category
Coaxial connectors
Type
Datasheet
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents