IBM 88861NG Datasheet

Category
HDD/SSD enclosures
Type
Datasheet

This manual is also suitable for

IBM 88861NG is a high-performance blade chassis designed for small and midsized businesses. It offers a range of features to help you get the most out of your IT investment, including:

  • Easy to deploy and manage: The IBM 88861NG comes with the Start Now Advisor tool, which walks you through the setup process and helps you configure the chassis to meet your specific needs. The chassis also includes a number of easy-to-use management tools that make it easy to monitor and maintain your system.
  • Flexible and scalable: The IBM 88861NG can accommodate up to six blade servers, giving you the flexibility to add or remove servers as needed. The chassis also supports a variety of storage and networking options, so you can customize it to meet your specific requirements.

IBM 88861NG is a high-performance blade chassis designed for small and midsized businesses. It offers a range of features to help you get the most out of your IT investment, including:

  • Easy to deploy and manage: The IBM 88861NG comes with the Start Now Advisor tool, which walks you through the setup process and helps you configure the chassis to meet your specific needs. The chassis also includes a number of easy-to-use management tools that make it easy to monitor and maintain your system.
  • Flexible and scalable: The IBM 88861NG can accommodate up to six blade servers, giving you the flexibility to add or remove servers as needed. The chassis also supports a variety of storage and networking options, so you can customize it to meet your specific requirements.
IBM BladeCenter S—Big benefits for
the small office
Highlights
All in one—integrates servers,
SAN storage, networking and
I/O into a single chassis
No special wiring needed—uses
standard office power plugs
with 100 – 240 V
Flexible modular technology—
integrates a family of IBM blade
servers supporting a wide
range of operating systems and
applications
Easy to deploy, use and
manage—BladeCenter® Start
Now Advisor allows simple
setup, so you can focus on your
business, not your IT
Helps build greener IT
infrastructures—IBM Cool
Blue™ technology delivers a
portfolio of tools that helps
plan, manage and control
power and cooling
Large enterprises and small businesses
alike depend on their IT systems to pro-
vide the high performance, availability,
and resiliency customers and partners
demand. Yet to stay competitive,
organizations must find an economical
way to simplify and efficiently manage
evolving technology requirements.
Small and midsized businesses in par-
ticular are pressured to do more with
less space, fewer IT resources and
tighter budgets.
For many organizations,
IBM BladeCenter is the answer.
Many large enterprises have long
known that blade systems can help:
Reduce the physical server sprawl
associated with typical businesses.
Minimize the IT staff needed to
manage the applications essential
to operating day-to-day business
functions.
Lower costs through the ability to
add more servers, storage and net-
working simply on an as-needed
basis.
Save energy through reduced power
consumption compared to rack
servers.
The Office Enablement Kit is the ideal way to deploy BladeCenter S in your environment. Shown here with
optional 1U monitor/keyboard tray.
Now IBM brings the power of
BladeCenter to small and
midsized businesses. Introducing
IBM BladeCenter S, the industry’s first
blade chassis uniquely designed for
small and midsized offices and distrib-
uted environments. Building-in simplicity
and economy, BladeCenter S is
designed to get big IT results from the
smallest IT staffs.
Right size, right choice
Small enough to sit under your desk,
the new BladeCenter S chassis makes
it easy and cost-effective for small and
midsized businesses to obtain IT results
at levels traditionally reserved for large
enterprises. With six blade servers, and
a fully integrated Storage Area Network
(SAN), the chassis simply plugs into an
average wall socket, helping eliminate
the need to own and operate costly
data centers.
Within a single chassis, BladeCenter S
supports virtually all of your
applications—including those running
on Microsoft® Windows®, IBM AIX®
and Linux®—and integrates the hard-
ware and software most used by mid-
sized businesses:
Antivirus/firewall protection
Voice over IP
Virtualization
E-mail and collaboration
applications
Backup and recovery
File and print applications
Easy tools to manage storage
BladeCenter S is compatible with the
BladeCenter family of products, helping
provide investment protection and
seamless growth. The new chassis
shares many of the BladeCenter blades
and switches. Leveraging a single,
compatible architecture can help you
reduce costs and complexity, while
helping deliver investment protection.
Easy to deploy with Start Now Advisor
IBM knows that midsized businesses
and enterprises with branch offices
need solutions that are easy-to-deploy.
That’s why BladeCenter S ships with
the Start Now Advisor tool, a DVD that
walks you through the setup of compo-
nents of the chassis. Setting up IT has
never been simpler. In addition, the
BladeCenter S Office Enablement Kit is
the ideal way to deploy BladeCenter S
into your everyday office. With features
that let you:
Reduce IT noise using a built-in
acoustical module
Secure all your information using a
front locking door
Allow growth with 4U of free rack
space
Easiest way to move six servers
using lockable wheels
Keep your IT healthy using an
optional contaminants filter
For businesses operating branch
offices—such as retailers or financial
institutions—IT administrators at
headquarters can easily pre-configure
hundreds of systems to operate in the
same manner, enabling branch man-
agers to simply plug a system in and
power it up.
Easy to manage
BladeCenter S is even easier to man-
age with easy-to-use tools that will get
your solution up and running quickly,
while helping you minimize the costs
associated with managing your
environment.
Installation
BladeCenter S takes the ease of setting
up IT to a whole new level. With
BladeCenter Start Now Advisor, you
can set up the components of the
chassis from a single console. Choose
from several popular and predefined
configurations, including RAID options,
and bypass the traditional step-by-step
approach to setting up storage.
Administration
With simpler and more cost-effective
administration, BladeCenter S may
require fewer IT resources, helping
enable skilled IT staff to be deployed to
more strategic initiatives. In addition,
tools such as IBM Predictive Failure
Analysis®, light path diagnostics and
multiple layers of redundancy can help
keep systems available and operating
at peak performance with little manual
IT intervention.
Acquisition
As part of the IBM Express Advantage
Portfolio, BladeCenter S is even easy to
purchase. The entire IBM Express
Portfolio™ is developed and priced with
a midsized budget and usability needs
in mind. In addition, low-rate finance
options may be available from
IBM Global Financing.
Less impact on budget, more savings
As energy costs continue to escalate,
power and cooling budgets are tighten-
ing. BladeCenter S is designed to facili-
tate impressive compute power in an
energy efficient package. In fact, it
can be up to 50% more energy
efficient than rack or tower servers.
BladeCenter S is the best of both
worlds, with the ability to help you
reduce both your power and cooling
costs.
BladeCenter S offers:
The ability to operate at standard
110 V or 220 V typical office
power, eliminating the need for
high-voltage power.
Groundbreaking power and cooling
technologies to help lower power
consumption and increase
efficiency.
A foundation for success
BladeCenter leads the market with the
largest install base of blade servers.
BladeCenter also has the premier
ecosystem providing solutions to
business, small and large. BladeCenter
offerings are designed to grow with
your business.
IBM BladeCenter S at a glance
Form factor
Blade bays
Disk bays
Media
Switch modules
Power supply module
Cooling modules
Systems management hardware
I/O ports
Systems management software
Predictive Failure Analysis
Light path diagnostics
Limited warranty
1
Integrated storage
Rack/7U incorporates blade server bays and hot-swap storage
high-availability midplane
Up to six 1- or 2-processor, and up to three 4-processor
Up to two Disk Storage Modules that can incorporate six
3.5" SAS, Nearline SAS, or SATA disks each
Optional DVD multi-burner accessible from each blade server
4 switch module bays
Up to 4 (hot-swap and redundant 950 W/1450 W with load-
balancing, auto-sensing and failover capabilities)
4 hot-swap and redundant blowers standard
1 management module standard
Keyboard, video, mouse, Ethernet, USB
Open and easy systems management and deployment tools
Hard disk drives, processors, blowers, memory
Blade server, processor, memory, power supplies, blowers, switch
module, management module, hard disk drives and expansion
card
3-year customer replaceable unit and onsite limited warranty
Support for hot-swap SAS or hot-swap SATA disks
External storage
Support for IBM System Storage™ solutions (including
DS and NAS family of products) and many widely adopted
non-IBM storage offerings
For more information
Learn how IBM BladeCenter S can help
your company do more with less. Visit:
ibm.com/bladecenter.
© Copyright IBM Corporation 2009
IBM Systems and Technology Group
Route 100
Somers, NY 10589
Produced in the United States of America
July 2009
All Rights Reserved
This publication could include technical
inaccuracies or photographic or typographical
errors. This publication was produced in the
United States. IBM may not offer the products,
services or features discussed in this document
in other countries, and the information may be
subject to change without notice. References
herein to IBM products and services do not
imply that IBM intends to make them available in
other countries. Consult your local IBM business
contact for information on the product or
services available in your area.
Information about non-IBM products is obtained
from the manufacturers of those products or
their published announcements. IBM has not
tested those products and cannot confirm the
performance, compatibility, or any other claims
related to non-IBM products. Questions on the
capabilities of non-IBM products should be
addressed to the suppliers of those products.
IBM, the IBM logo, ibm.com and BladeCenter
are trademarks or registered trademarks
of IBM Corporation in the United States,
other countries or both. If these and other
IBM trademarked terms are marked on their first
occurrence in this information with a trademark
symbol (® or ™), these symbols indicate U.S.
registered or common law trademarks owned
by IBM at the time this information was
published. Such trademarks may also be
registered or common law trademarks in other
countries. A current list of IBM trademarks is
available on the Web at “Copyright and
trademark information” at ibm.com/legal/
copytrade.shtml.
Linux is a trademark of Linus Torvalds in the
United States, other countries, or both.
Microsoft and Windows are trademarks of
Microsoft Corporation in the United States,
other countries or both.
Other company, product and service names
may be trademarks or service marks of others.
1
IBM hardware products are made from new
parts, or new and serviceable used parts.
Regardless, our warranty terms apply. For a
copy of applicable product warranties, write to:
Warranty Information, P.O. Box 12195, RTP,
NC 27709, Attn: Dept. JDJA/B203. IBM makes
no representation or warranty regarding third-
party products or services, including those
designated as ServerProven®.
BLD03007-USEN-03
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

IBM 88861NG Datasheet

Category
HDD/SSD enclosures
Type
Datasheet
This manual is also suitable for

IBM 88861NG is a high-performance blade chassis designed for small and midsized businesses. It offers a range of features to help you get the most out of your IT investment, including:

  • Easy to deploy and manage: The IBM 88861NG comes with the Start Now Advisor tool, which walks you through the setup process and helps you configure the chassis to meet your specific needs. The chassis also includes a number of easy-to-use management tools that make it easy to monitor and maintain your system.
  • Flexible and scalable: The IBM 88861NG can accommodate up to six blade servers, giving you the flexibility to add or remove servers as needed. The chassis also supports a variety of storage and networking options, so you can customize it to meet your specific requirements.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI