ANZZI FR-AZ801 Installation guide

Type
Installation guide

ANZZI FR-AZ801 is a bathroom faucet set that includes a handle, spout, hand shower, and all necessary mounting hardware. The faucet is made of durable materials and features a sleek, modern design. The handle is single-lever, making it easy to control the water flow and temperature. The spout is high-arc, providing ample clearance for washing hands or filling containers. The hand shower is also high-quality, with a long hose that provides plenty of reach. Overall, the ANZZI FR-AZ801 is a well-made and stylish faucet set that is perfect for any bathroom. Here are some of the features and possible use cases of the ANZZI FR-AZ801:

ANZZI FR-AZ801 is a bathroom faucet set that includes a handle, spout, hand shower, and all necessary mounting hardware. The faucet is made of durable materials and features a sleek, modern design. The handle is single-lever, making it easy to control the water flow and temperature. The spout is high-arc, providing ample clearance for washing hands or filling containers. The hand shower is also high-quality, with a long hose that provides plenty of reach. Overall, the ANZZI FR-AZ801 is a well-made and stylish faucet set that is perfect for any bathroom. Here are some of the features and possible use cases of the ANZZI FR-AZ801:

EXPLODED DRAWING
Notes For reference only. We reserve the right
to make changes without any notice.
:
Please read the followings before installing and usage.
[inch]For Reference only (unit = mm )
DIMENSIONS
RECOMMENDED TOOLS
FAUCET MAINTENANCE
CARE INSTRUCTIONS
To keep your faucet looking its best, please follow
these simple care instructions:
1. Remove as much surface dirt and film using
clear water and a soft cotton cloth.
2. Use any of the following to remove tough
surface film and build-up:
- Mild liquid detergent
- Non-acidic, non-abrasive gentle liquid cleanser
- Non-abrasive liquid polisher.
3. Once clean, rinse faucet with clear water to
thoroughly remove cleaner or polish and blot
dry with soft cotton cloth.
1. Use abrasive cleansers, cloths, or paper towels.
2. Use any cleaning agents containing acids, polish,
waxes, alcohol, ammonia, bleach, solvents or any
other corrosive or harsh chemical cleansers.
DO:
DO NOT:
NO.
Part No
Qty
CTHZ0312
CTST0117
CTCP0072
CTKB0065
CTCP0192
ATBA0138
ATBA0169
CTCB0704
CTDB0468
CTWR0156
CTWR0282
CTWT0071
CTST0013
CTNB0321
ATBP0312
CTFB0220
CTHB0269
CTWR0018
CTQP0030
CTXB0021
CTWB0089
CTRR0138
CTPB0549
CTRR0082
CTMT0044
CTBT0070
CTRR0139
CTDB0133
CTST0137
CTRR0137
CTDB0131
CTWR0060
CTWR0115
CTWT0038
CTNB0156
CTPB0188
CTWR0088
CTTB0014
ATBE0141
CTWR0341
ATBL0026
ATBA4028
ATBD0093
ATBP0070
ATBA0100
ATBP0311
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
21
1
1
1
1
1
1
1
1
1
1
1
1
2
2
3
1
1
1
1
1
1
2
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Part Desc
HANDLE
SCREW
CAP
RETAINER
COVER
CARTRIDGE
CHECK VALVE
SLEEVE
BASE SEAT
WASHER
GASKET
GASKET
SCREW
NUT
HOSE
SPOUT
TIP
WASHER
FLOW REGULATOR
HOUSING
WASHER
WASHER
SHANK
O-RING
LIFT ROD
SPRING
O-RING
STOP
SCREW
O-RING
BASE SEAT
WASHER
WASHER
WASHER
NUT
SHANK
WASHER
BLOCK
SHOWER
WASHER
ADAPTER
CHECK VALVE
HOLDER
HOSE
CHECK VALVE
HOSE
FR-AZ801
Installation Guide
For more information visit
www.ANZZI.com or call
1-844-44-ANZZI
Place the base of the handle ange kit
on the left hole. Insert the braided ex
connectors through the hole.
From underneath, place metal washer
and locknut on each threaded stud and
tighten gently by hand.
Now, position and properly align the
handle on top. Tighten the locknuts with
a at head screwdriver or appropriate
tool. Do not overtighten.
Unscrew the Allen screw in back of
the spout. Pull apart the spout from its
connector (do not unscrew). Separate
the spout ange from the spout. Place
o-ring underneath the spout ange and
place the ange over the center hole
between the handle and hand shower.
Unscrew the superior spout locknut of
the spout connector. Make sure that the
locknut and the metal and rubber
washers are in place on the spout
connector. From underneath the
bathtub, insert the top of the
connector in the hole between the
handle and hand shower. From over
the bathtub, screw the superior spout
locknut to secure the connector and the
ange in place.
Install the spout on the connector and
align the spout with the ange, making
sure to insert the anti-rotation pin in
the stop hole. Tighten spout in place by
screwing the Allen screw in front of
the spout.
Unscrew the locknut and take off metal
and rubber washers.
Insert the hand shower holder in the
hole making sure to place the o-ring
underneath the fix holder. From under,
screw the rubber and metal washers,
as well as the retainer ring to the holder
in place.
Connect the hose to the hand shower
hole, making sure that the
rubber washer is in place.
From above, slide the hose through the
holder to sit the hand shower on its
base.
Using the exible connectors included
(5), connect the valve to the spout
connector. Use the extra exible
connector (14) to join the spout to the
hand shower hose.Tighten using
appropriate tool. (ill. A)
Connect hot and cold valves to the
corresponding water supply lines using
exible connectors and tighten. (ill.B)
WARNING: Remove aerator before
testing connections. Place the
appropriate wrench on the at edges
and unfasten. Use a cloth to not
damage the part. Do not overtighten.
Verify that there are no leaks by slowly
opening the hot and cold water. In case
of a leak, shut off the water supply and
tighten connectors 1⁄4 turn using the
appropriate tool. Repeat if necessary.
Turn on the faucet and leave both hot
and cold water running for at least one
minute to evacuate the air trapped in
the pipes. Turn off water.
Assemble the aerator as illustrated and
insert into the spout, tightening by hand.
You can now turn on water supply.
  • Page 1 1
  • Page 2 2

ANZZI FR-AZ801 Installation guide

Type
Installation guide

ANZZI FR-AZ801 is a bathroom faucet set that includes a handle, spout, hand shower, and all necessary mounting hardware. The faucet is made of durable materials and features a sleek, modern design. The handle is single-lever, making it easy to control the water flow and temperature. The spout is high-arc, providing ample clearance for washing hands or filling containers. The hand shower is also high-quality, with a long hose that provides plenty of reach. Overall, the ANZZI FR-AZ801 is a well-made and stylish faucet set that is perfect for any bathroom. Here are some of the features and possible use cases of the ANZZI FR-AZ801:

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI