ENZO RODI ERF2212254AP-10 User manual

Brand
ENZO RODI
Model
ERF2212254AP-10
Category
Sanitary ware
Type
User manual

ENZO RODI ERF2212254AP-10 is a widespread lavatory faucet. It is designed for indoor use in public places and common residences. The faucet has a flow rate of 1.2 gpm at 60 psi flow pressure and a maximum operating pressure of 125 psi. It can be used with hot water inlet temperatures up to 90°C, but a temperature of 60°C is recommended for energy saving. The faucet comes with a temperature limiter and a pop-up assembly. To keep the surface clean and bright, use a soft cloth and mild cleansers. Avoid using abrasive cleansers, waxes, or solvents.

ENZO RODI ERF2212254AP-10 is a widespread lavatory faucet. It is designed for indoor use in public places and common residences. The faucet has a flow rate of 1.2 gpm at 60 psi flow pressure and a maximum operating pressure of 125 psi. It can be used with hot water inlet temperatures up to 90°C, but a temperature of 60°C is recommended for energy saving. The faucet comes with a temperature limiter and a pop-up assembly. To keep the surface clean and bright, use a soft cloth and mild cleansers. Avoid using abrasive cleansers, waxes, or solvents.

1Bravat (China) GmbH Customer Supports:[email protected]1512380315123803Bravat (China) GmbH Customer Supports:[email protected] 4
MODEL: ERF2212254CP-10
ERF2212254AP-10
ERF2212254HA-10
Description: Widespread Lavatory Faucet
PRODUCTS INSTALLATION INSTRUCTIONS
A
HELPFUL TOOLS
E
SPECIFICATION
Before installing the new mixer, it is essential that you thoroughly flush through the supply pipes in order to remove any remaining swarf,
solder or other impurities. Failure to carry out this simple procedure could cause problems or damage to the workings of the mixer.
Work water pressure10-100 psi( Including cold and hot).
If the pictures and statements in the ‘Installation Specifications’ is unconfirmed with practicality, please take practicality as standard.
！
Points for attention before installation
Application:
Operation with unpressurized storage heaters is not possible.
Use for indoor public places and common residence.
Specifications
Flow pressure: min. 10 psi – recommended 20 – 100 psi
Operating pressure: max. 125 psi
Test pressure: 60 psi
Flow rate at 60 psi flow pressure
for basin: 1.2 gpm
Hot water inlet temperature: max. 90℃
Recommended (energy saving): 60℃
Environment temperature: 5℃45℃
If static pressure exceeds 100 psi, a pressure-reducing valve must
be fitted.
Avoid major pressure differences between hot and cold water supply.
This technical product information is exclusively
for the installer or trained specialists.
Please pass these instructions on to the user.
GB
Installation:
Flush piping system prior and after installation of
fitting thoroughly!
Fitting a temperature limiter is possible.
Function:
Check connections for leaks and check function of
fitting.
Maintenance:
Inspect and clean all components and replace if
necessary.
Shut off water supply for maintenance work.
When installing the cartridge, ensure that the seals
are correctly seated.
Tighten the screws evenly and alternately.
Replacement parts: see exploded drawing.
Care: see Care Instructions.
F
MAINTENANCE
CAUTION:
Always turn water OFF before removing existing or disassembing the faucet. Open faucet handles to relieve water
pressure and insure that complete water shut-off has been accomplished.
To keep the surface clean and bright, please clean the faucet regularly,please abide by the following
procedures:
1. Use rinsing water and soft cloth, clean bilge and bilge membrane on the surface to the best of the abilities.
2. Cleaned the residua with the following cleansers only.
3. After cleaning, use rinsing water to clean all cleanser immediately and drying with a soft cotton cloth.
4. Carefully dismantle the aerator regularly, rinse under clean running water until any loose debris is cleared to avoid
the influence to water outflow.
Soft liquid cleanser.
Colorless glass cleanser, totally soluble powder cleanser without abrasive capability.(Mixed by instructions.)
No abrasive cleansers waxes.
Never use cleanser, emery cloth or handkerchief which can rub.
Never use cleaners containing abrasive cleansers, ammonia,bleach, acids, waxes, alcohol, solvents or other
products not recommended for chrome.
G
SPECIAL STATEMENT
The products installation instruction is written in accordance with the latest product information, following the sustainable develop-
ment strategy of the Company, to improve continually the produce's specification, performance etc.,subject to change without notice.
(The Company reserves the right to interpret)
NO. NAME QTY.
1 Lift Knob 1
2 Screw 2
3 Handle 1
4 Screw 2
5 Connector 2
6 Nut 2
7
Cartridge(Hot) 1
8
Base 2
9
Nut 2
10
O-Ring 2
11
Body 2
12
Washer 2
13
Washer 2
14
Nut 2
15
Screw 4
16
Pop-Up Assembly 1
17
Hose 2
18
Water Joint Components 1
19
Washer 1
20
Nut 1
21
Washer 1
22
Rubber Washer 1
23
Pipe 1
24
Lift Rod 1
25
O-Ring 1
26
Washer 1
27
Base 1
28
Cartridge(Cold) 1
29
Spout 1
30
Handle 1
31
Allen Key 1
32
Aerator 1
33
O-Ring 1
34
Base 1
Spanner
Teflon tapeScrewdriver Flashlight
3Bravat (China) GmbH Customer Supports:[email protected]1512380315123803Bravat (China) GmbH Customer Supports:[email protected]2
B
INSTALLATION DIMENSION
D
FAUCET OPERATION
C
INSTALLATION STEP
Unit: inch
6 75
1 2 3 4
9
10
8
Hot
90° 90°
Cold
Close Close
Open Open
Length 11 13/16＂
4＂ 4＂
2-1/2-14 NPSM
Max 1 1/2＂
Max 1 3/8＂
1 1/4＂
6 5/16＂
8 3/16＂
3 5/8＂
4 1/4＂
6 3/16＂
5 1/4＂
7＂
2 1/8＂
2 15/16＂
2 1/16＂
1 9/16＂- 1 13/16＂
1 1/4＂- 1 1/2＂
1 1/4＂-
1 1/2＂
2 1/16＂
Open drainage
Close drainage
A
B
15123803
9L173101CP英文说明书
王少凤
陈贵鸿
刘恒良
彭俊毅
2016-09-30
100g双胶纸
技术要求：
1.尺寸：A4对折，A5版面；
2.印刷：双面单色印刷；
3.纸张：100克双胶纸；
4.说明书不需装订；
5.页数：4页；
6.此图主要做规格描述，实际印刷依照后4页。
理论重量 [g]
[cm ]
3
[cm ]
2
[cm ]
2
理论体积
理论面积
理论表面积
客户版本
---
---
---
--- ---
---
---
客户编号
绘图单位 mm
比 例
设 计 审 核
校 对 批 准
日 期
图 号
材料
第 1 页/共 1 页
广东省广州市番禺区
沙头街禺山西路363号
版次 处数 ECN编号
A
4
3
2
1
4
3
2
1
B
C D
A B
C D
更改人 日 期
声明:本图为机密文件,
版权归广州海鸥卫浴用
品股份有限公司所有，
未经本公司的书面许可
不得擅自使用、复制、
或向他人展示。
  • Page 1 1
  • Page 2 2
  • Page 3 3

ENZO RODI ERF2212254AP-10 User manual

Brand
ENZO RODI
Model
ERF2212254AP-10
Category
Sanitary ware
Type
User manual

ENZO RODI ERF2212254AP-10 is a widespread lavatory faucet. It is designed for indoor use in public places and common residences. The faucet has a flow rate of 1.2 gpm at 60 psi flow pressure and a maximum operating pressure of 125 psi. It can be used with hot water inlet temperatures up to 90°C, but a temperature of 60°C is recommended for energy saving. The faucet comes with a temperature limiter and a pop-up assembly. To keep the surface clean and bright, use a soft cloth and mild cleansers. Avoid using abrasive cleansers, waxes, or solvents.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents