LNC YIYRYMLWS4101Q3 Installation guide

Brand: LNC

Model: YIYRYMLWS4101Q3

Type: Installation guide

This manual is also suitable for

2MQ2EYLWS4101Q3

The LNC YIYRYMLWS4101Q3 is a stylish and functional wall lamp that provides ample lighting for your indoor spaces. With its durable metal construction and adjustable shade, you can direct light exactly where you need it. Installation is simple and requires basic tools and electrical knowledge. Enjoy the warm and inviting ambiance created by this versatile lighting solution.

+1 850 296 2377 Working hours : Mon - Fri 9:00 a.m. - 16:00 p.m. EST [email protected]m

www.ihomeangel.com Page: - 1 - / 3

Item Number: A0224101/2

WARNING (To reduce the risk of fire, electric shock, or injury to persons):

1. We suggest installation by a licensed electrician.

2. Please read the instruction carefully and save it as you may need it at later time.

3. Before you start, NEVER attempt any work without shutting off the electricity until the work is done. A). Go

to the main fuse, or circuit breaker, box in your home. Place the main power switch in the “OFF” position. B).

Place the wall switch in the “OFF” position.

4. Mounting surface should be clean, dry, flat, strong enough and 1/4” larger than the canopy on all side. Any

gaps between the mounting surface and canopy exceeding 3/16” should be corrected as required.

5. Make sure that the ceiling or wall can stand the weight of the lamp before fixture.

6. Make sure the voltage you are using is 120V. The maximum wattage is 60W per bulb.

7. Keep the lamp away from acidic and basic objects in case of damaging the surface of the lamp.

8. When replacing bulb, you should turn off or unplug the lamp and you must wait until it is cool as bulbs get hot

quickly.

9. The safety instructions appearing in this manual are not meant to cover all possible conditions that may occur.

It must be understood that common sense, caution and care must be used with any electrical products.

IMAGE FOR FINISHED PRODUCT：

TOOLS REQUIRED (NOT INCLUDED):

Before doing assembly and installation please prepare the needed tools as below picture

+1 850 296 2377 Working hours : Mon - Fri 9:00 a.m. - 16:00 p.m. EST [email protected]m

www.ihomeangel.com Page: - 2 - / 3

PARTS TYPE & QTY INCLUDING:

(A) Mounting plate assembly (1)

(B) Green ground screw (1)

(E) Back plate (1)

(F) Threaded ball (2)

(G) Socket cap (1)

(H) Metal shade (1)

(I) Socket ring (1)

ACCESSORIES & QTY ENCLOSED:

(D) Plastic Wire Connectors (3)

ASSEMBLY & INSTALLATION INSTRUCTIONS:

1. Carefully remove the fixture from the carton and check that all parts and accessories are included as shown in

the above illustration .

2. Turn off power

Before you start to make installation, NEVER attempt any work without shutting off the

electricity until the work is done. A). Go to the main fuse, or circuit breaker, box in your home.

Place the main power switch in the “OFF” position. B). Place the wall switch in the

“OFF”position.

3. Unscrew the socket ring (I )from the socket ,then place metal shade (H)

over the socket ,secure with the socket ring( I)

4. Unscrew the threaded balls (F) from the back plate (E)

then carefully remove the mounting plate assembly (A).

5. Attach the mounting plate assembly(A) to outlet box with

mounting screws (C).

Carefully and gently pass the outlet box wires through

the mounting plate assembly(A).

+1 850 296 2377 Working hours : Mon - Fri 9:00 a.m. - 16:00 p.m. EST [email protected]m

www.ihomeangel.com Page: - 3 - / 3

6. Make wire connections

Connect wires as below wires connecting shown. TAKE NOTE OF YOUR WIRE COLOR OF

FIXTURE ,NEVER CONNECT WIRE TO GROUND WIRE

Connect ground wire according to below chart Connect wires according to below chart

Twist plastic wire connector (D)until wires are tightly joined together,wrap each connector with approved electrical

tape and carefully tuck all wires into the outlet box .

7. Align the holes in the back plate (E) with the mounting screws,

then attach the back plate (E) using the previously removed

threaded balls (F). Hand tighten until snug.

Note: The back plate (E) should be snug against the

wall and the threaded balls. If not, adjust the length

of the nipples on the mounting plate assembly (A) by

unscrewing the preassembled hex nuts and then

screwing the mounting screws in or out of the

mounting plate until the length is achieved.

Tighten the hex nuts and proceed to the step 7 .

8. Install bulbs (Not included. Please do not exceed the maximum

capacity recommended on the socket.)

9. Check everything is already installed properly, then you could turn on the light. Enjoy!

CLEANING

To clean, wipe fixture with a soft cloth. Do not use abrasive materials such as scouring pads or powders, steel wool or

abrasive paper.

ORDERING PARTS

Keep this sheet for future reference, and in case you need to order replacement parts. All parts for this fixture can be

ordered from place of purchase. Be sure to use exact wording from illustration when ordering parts.

LNC YIYRYMLWS4101Q3 Installation guide

Brand: LNC

Model: YIYRYMLWS4101Q3

Type: Installation guide

This manual is also suitable for

2MQ2EYLWS4101Q3

Download PDF

report

LNC YIYRYMLWS4101Q3 Installation guide

This manual is also suitable for

LNC YIYRYMLWS4101Q3 Installation guide

Related papers

Other documents