75 mm / 2.95”
r 10 mm
120 mm / 4.72”
762 mm / 30”
712 mm / 28.03”
533 mm / 21”
228.6 mm / 9” 238.76 mm / 9.4”
433 mm / 17.05”
25 mm
25 mm
90 mm / 3.5”
* All Measurements are Approximate
30x21-R Template
NOTE: Cutout template is provided only as a guide and should be checked
against actual sink dimensions to determine the correct t before cutting.
CAUTION:
- Sink edges are sharp and can cause severe cuts. Always wear gloves when
handling the sink.
Use solid line for Flush Mount. Sink edge is
ush with the edge of counter top
Cut Out Size
30” (762 mm) Width x 20.2” (513 mm) Depth
Sink Countertop
Use dotted line for Under Mount. Sink rim is
about 1/2” (12.5 mm) revealed from the edge of
the counter top opening.
Cut Out Size
29.02” (737 mm) Width x 19.7” (500.5 mm) Depth
Sink
Countertop
Front
BackTop View
/
