CONTEC CO.
,
LTD.
3-9-31
,
Himesato
,
Nishi
y
odo
g
awa-ku
,
Osaka 555-0025
,
Ja
p
an
http://www.contec.com
/
No part of this document may be copied or reproduced in any form by any means
without prior written consent of CONTEC CO., LTD.
NA06770 (LYXB781) [04252019] April 2019 Edition
Product Guid
e
BOX-PC
Fan-less, Atom E3845 1.91GHz
BX-R100 Series
Thank you for purchasing this product. The product you have purchased consists of the
following items.
Check, with the following list, that your package is complete.
If you find any item either missing or damaged, please contact the sales representative you
purchased the product from.
For appropriate usage, be certain to read the Reference Manual before using this product.
Visit our website for downloading free other software tools.
The following manuals come with this product. Visit our website and download them by
entering the model type in "Downloads". Read them before using the product.
Before using the product, be certain to read the following guide, manual, and driver soft-
ware. They can be downloaded from Contec website.
Name Contents How to
g
et
Product Guide (This sheet) This lists the product configuration and
describes the precautions.
Included in the package
(Printed matter)
Reference Manual This describes the hardware aspects
such as functions and settin
g
s.
Download (PDF)
IPC Precaution List This describes the precautions when using
the product.
Included in the package
(Printed matter)
MICROSOFT SOFTWARE
LICENSE TERMS
This describes the rights and conditions of
user when usin
g
Windows software.
Included in the package
(Printed matter) *1
Pre-installed type
OS Manual
This describes OS basic information, the
setup procedure, and the recovery
p
rocedure.
Download (PDF)
*1 Not packed in the Base Model
Download
https://www.contec.com/download/
1. About the Product
This product is a fan-less computer for embedded applications and it conforms to
EN50155(Class TX) standard.
With an Intel Atom processor E3845 of Quad-Core CPU, it can perform stable, high-speed
processing of four applications at the same time (one application is processed by each core).
The “resource-saving PC” contributes to downsizing and power-saving of equipment to re-
duce your running cost and to promote energy efficiency.
Embedded-type CPU have been adopted. The use of readily available parts ensures the ease
of the use of the product. In addition, the use of Contec-customized BIOS allows support
to be provided at the BIOS level.
2. Product Configuration
This product consists of the items listed below.
Check, with the following list, that your package is complete. If you discover damaged or
missing items, contact your retailer.
BX-R100-NA01M03
[Base Model]
BX-R100-W10M01M03
[OS pre-install Model]
Name Pcs. Pcs.
The Main Body 1
1
Cross Recess Washer Assembled Bolt
(M4 x 10, black)
4
4
RS-232C Connector Cover
(attached to the product)
1 1
LAN Connector
(attached to the product)
2 2
P
ower Connector Cover
(attached to the product)
1 1
DP Connector Cove
r
(attached to the product)
1 1
SD Connector Cover
(attached to the product)
1 1
Product Guide
(this sheet)
1
1
IPC Precaution List 1
1
Warranty Certificate 1
1
Serial Number Label 1
1
Royalty Consent
Contract (OS)
- *1 1
Recovery Disk - *1 1
*1 Not packed in the Base Model
3. Safety Precautions
Understand the following definitions and precautions to use the product safely.
Handling Precautions
WARNING
Do not use the product in locations exposed to a flammable or corrosive gas. It may
cause explosion, fire, electrical shock, or malfunction.
Always check that the power supply is turned off before connecting or disconnecting
power cables.
Do not place the product in an unstable location or use incomplete mountings.
Otherwise, it may cause the product to fall.
Do not modify the product.
Always turn off the power before inserting or removing circuit boards or cables.
Do not attempt to replace the battery as inappropriate battery replacement poses a risk
of explosion.
For battery replacement, contact your retailer as it must be performed as a process of
repair.
When disposing of a used battery, follow the disposal procedures stipulated under the
relevant laws and municipal ordinances.
For details on replacing the battery, refer to the Appendix of the Reference Manual.
The product is not intended for use in aerospace, space, nuclear power, medical equip-
ment, or other applications that require a very high level of reliability. Do not use the
product in such applications.
If using the product in applications where safety is critical such as in railways, automotive,
or disaster prevention or security systems, please contact your retailer.
CAUTION
Do not use or store this product in a location exposed to high or low temperature that
exceeds range of specification or susceptible to rapid temperature changes.
Example: Exposure to direct sun
In the vicinity of a heat source
Do not use this product in the vicinity of devices that generate strong magnetic force or
noise. Such products will cause this product to malfunction.
Do not use or store this product in the presence of chemicals.
To clean this product, wipe it gently with a soft cloth dampened with either water or mild
detergent. Do not use chemicals or a volatile solvent, such as benzene or thinner, to
prevent pealing or discoloration of the paint.
This product’s case may become hot. To avoid being burned, do not touch that section
while this product is in operation or immediately after turning off the power.
Avoid installation in a location where people may come into contact with that section.
When connecting cables, first check the shapes of connectors, and then insert them in
the correct orientation. After they are connected, do not put too much load on the con-
nected part. Doing so may result in poor contact or damage to the product and the
connected part.
Do not touch metal parts or terminals with your hands when the product is in operation.
Otherwise, the product may malfunction, or cause failure.
Do not touch the product or connectors with a wet hand to avoid electric shock.
The specifications of the product are subject to change without notice for enhancement
and quality improvement. Even when using the product continuously, be sure to read the
manual in the CONTEC’s website and understand the contents.
When the product is used in a place that is affected by overcurrent or overvoltage
(lightning surge), select appropriate surge protection device for all of the route (Power
line, signal line, earth, etc.). Consult with the specialist regarding selecting, purchasing,
and setting the surge protection device.
CONTEC does not provide any guarantee for the integrity of data on SSD.
To prevent corruption of files, always shutdown the OS before turning off this product.
CONTEC shall not be responsibility for damages caused by malfunctions due to
combining the product with other devices.
Do not modify the product. CONTEC will bear no responsibility for any problems, etc.,
resulting from modifying the product.
In the event of failure or abnormality (foul smells or excessive heat generation), unplug
the power cord immediately and contact your retailer.
To connect with peripherals, use a grounded, shielded cable.
Component Life:
(1) Battery…The internal calendar clock and CMOS RAM are backed by a Lithium
primary battery. The backup time at a temperature of 25°C with
the power disconnected is 10 years or more.
(2) SSD… SSD is used for the OS storage area with the SSD type.
The estimated failure rate is 1 every 3,000 rewrites for MLC types.
For details, refer to the Appendix of the Reference Manual.
* Replacement of expendables is handled as a repair (there will be a charge).
* The service life for consumable parts are reference values and are not guaranteed values.
When disposing of the product, follow the disposal procedures stipulated under the rel-
evant laws and municipal ordinances.
Regardless of the foregoing statements, CONTEC is not liable for any damages whatso-
ever (Including damages for loss of business profits) arising out of the use or inability to
use this CONTEC product or the information contained herein.
4. Specifications
Function Specifications
Item
Description
CPU Intel
®
Core™ i5 Processor E3845 1.91GHz
BIOS BIOS (mfd. b
y
AMI)
Memor
y
4GB (204pin SO-DIMM), PC3-10600 (DDR3L-1333) ECC
Graphics controller Intel
®
HD Graphics
System
resolution
Display
Port
640 × 480, 800 × 600, 1,024 × 768, 1,152 × 864, 1,280 × 600,
1,280 × 720, 1,280 × 768, 1,280 × 800, 1,280 × 960, 1,280 × 1,024,
1,360 × 768, 1,366 × 768, 1,400 × 1,050, 1,440 × 900, 1,600 × 900,
1,680 × 1,050, 1,920 × 1,080, 1,920 × 1,200 (16,770,000 colors)
Internal stora
g
e *1 mSATA slot x 1, 32GB(MLC) x 1 (Built-in)
Card slot SD card slot
LAN Intel I210IT controller
1000BASE-T/100BASE-TX/10BASE-T
RJ-45 connector x 2 (supports Wake On LAN)
USB USB 2.0-compliant x 2 ports
Serial RS-232C 1ch, Baud rate: 50 - 115,200bps
Hardware monitorin
g
Monitorin
g
CPU temperature, board temperature, power volta
g
e
Watchdog timer (WDT) Software programmable, 255 level (1sec - 255sec),
Time up allows reset.
Real Time Clock Lithium backup battery life: 10 years or more
The real-time clock is accurate within ±3 minutes (at 25°C) per
month (CPU built-in RTC).
Power Management Power management setup via BIOS
Power On by Ring/Wake On LAN
Supports ACPI Power mana
g
ement
Inter
face
Displa
y
Displa
y
Port x 1
SD card 1slot
mSATA slot 1slot (embedded)
LAN 2-port (M12 8pin X-Coded connector)
PoE (1 port 25.5W input compatible)
USB USB2.0 compliant 2port (TYPE-A connector)
RS-232C 1-port (9pin D-SUB connector [male])
Power
supply
Input
voltage
ran
g
e
Rating 12V- 24VDC (M12 4pin A-Coded connector)
PoE (25.5W input, M12 8pin X-Coded connector)
External
device power
supply
capacit
y
USB2.0 I/F: +5V 1.0A (500mA x 2 per port)
Physical dimensions
(mm)
200(W) x 185(D) x 46(H)
Wei
g
ht 1.7k
g
(approx.)
*1 The capacity of storage device in the OS pre-installed type is a value when 1GB is calculated
by 1 billion bytes. The capacity that can be recognized from OS might be displayed fewer than
an actual value.
*2 Pay attention to the ambient temperature when operating 1000BASE-T.
Installation Environment Requirements
Item Description
Operating ambient
temperature *3
-40 - +70°C
(When using 1000BASE-T: -40 - 65°C) (during forced air
cooling (0.5m/s)
-40 - +60°C
(When using 1000BASE-T: -40 - 55°C) (during natural air
coolin
g
)
Operatin
g
ambient humidit
y
10 - 90%RH (No condensation)
Non-operating ambient
temperature
-40 - +80°C
Non-operating ambient
humidit
y
10 - 90%RH (No condensation)
Floatin
g
dust particles Not to be excessive
Corrosive
g
ases None
Line-noise
resistance
Line noise AC Line /±2kV
(IEC61000-4-4 Level 3, EN61000-4-4 Level 3)
Static
electricity
resistance
Touch /±4kV (IEC61000-4-2 Level 2, EN61000-4-2 Level 2)
Air /±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)
Vibration
resistance
Sweep
resistance
10 - 57Hz /semi-amplitude vibration 0.375mm, 57 - 500Hz/5.0G
60minutes each in X, Y, and Z directions (JIS C60068-2-6-com-
pliant, IEC60068-2-6-compliant)
Shock resistance 100G half-sine shock for 6ms in X, Y, and Z directions
(JIS C 60068-2-27
–
compliant, IEC 60068-2-27 -compliant)
Groundin
g
Class D
g
roundin
g
, SG-FG / continuit
y
Standard VCCI Class A, FCC Class A,
CE Markin
g
(EMC Directive Class A, RoHS Directive)
*3 Vary depending on the orientation. Please read the Reference Manual for more details
5. Physical Dimensions
Product Guide
Product Guide Warranty Certificate Royalty consent
contract (OS) *1
IPC
Precaution List
Serial Number Label
Royalty
consent
contract
Warranty
Certificate
Recovery Disk *1
IPC Precaution List
Cross Recess Washer Assembled Bolt
(M4×10, black)
The main body
DP
[mm]
170
170
200
185
148
46
4-Φ6
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Contec SPF14SQ1700 NEW Owner's manual
-
-
-
-
-
-
-
-
-
