- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
Thank you for selecting American Standard...
the benchmark of fine quality for over 140 years.
To ensure that your installation proceeds smoothly-please read
these instructions carefully before you begin.
RECOMMENDED TOOLS
ROUGHING-IN DIMENSIONS
1
INSTALL SPOUT
Quentin
™
Roman Tub Filler
INSTALLATION
INSTRUCTIONS
T440900
T440901
Certied to comply with ANSI A112.18.1M
CAUTION
Turn off hot and cold water
supplies before begining.
M965954 (8/18)
1" MAX.
(25 mm)
8" TO 16"
FLEXIBLE INSTALLATION
(203 TO 406 mm)
MOUNTING
SURFACE
2-7/8" D.
(72mm) D.
2-3/8" D.
(60mm) D.
4-7/8"
(125mm)
6-1/2" to 11-3/4"
(165mm to 300mm)
8-3/4"
(222mm)
5-1/8"
(131mm)
2-1/16" D.
(52mm) D.
9"
(230mm)
11-9/16"
(294mm)
8"
(205mm)
Adjustable Wrench
Channel Locks
Flat Blade Screwdriver
Phillips Screwdriver
Hex Wench
(supplied)
Hex wench
(supplied)
RECESS
3
4
MOUNTING
SURFACE
1
5
2
6
• Apply 4-5 drops of THREADLOCKER (1)
on DIVERTER INSERT (2) threads (supplied).
NOTE: If installing on nished deck, install DIVERTER
INSERT (2) through WASHER (6).
• Thread DIVERTER INSERT (2) carefully until it touches the
installation surface, be sure the RUBBER RING (5)
is properly seated in it’s RECESS at the base of the
SPOUT (3).
• Thread SET SCREW (4) using 5 mm hex wrench supplied.
Make certain SET SCREW (4) is properly aligned and tight
so that SPOUT (3) is locked in place.