- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2018
Thank you for selecting American Standard...
the benchmark of fine quality for over 140 years.
To ensure that your installation proceeds smoothly-please read
these instructions carefully before you begin.
RECOMMENDED TOOLS
1
INSTALL SPOUT
Colony
®
Pro
Roman Tub Filler
INSTALLATION
INSTRUCTIONS
T075920
T075921
Certied to comply with ANSI A112.18.1M
CAUTION
Turn off hot and cold water
supplies before begining.
M965947 (8/18)
MOUNTING
SURFACE
305 mm
(12
")
52 mm
(2
") DIA.
183 mm
(7-1/4")
52 mm
(2-1/16")
135 mm
(5-5/16")
163 mm
(6-7/16")
253 mm
(10")
200 mm
(7-7/8")
35 mm
(1-3/8" D.)
HOLE
104 mm
(4-1/8")
78 mm
(3-1/16")
1" MAX.
(25 mm)
8" TO 16"
FLEXIBLE INSTALLATION
(203 TO 406 mm)
305mm
(12
"
MAX)
Adjustable Wrench
Channel Locks
Flat Blade Screwdriver
Phillips Screwdriver
Hex Wench
(supplied)
Hex wench
(supplied)
RECESS
MOUNTING
SURFACE
1
4
5
3
2
7
ROUGHING-IN
DIMENSIONS
• Apply 4-5 drops of THREADLOCKER (1)
on DIVERTER INSERT (2) threads (supplied).
NOTE: If installing on nished deck, install DIVERTER
INSERT (2) through WASHER (7).
• Thread DIVERTER INSERT (2) carefully until it touches the
installation surface, be sure the RUBBER RING (5)
is properly seated in it’s RECESS at the base of the
SPOUT (3).
• Thread SET SCREW (4) using 5 mm hex wrench supplied.
Make certain SET SCREW (4) is properly aligned and tight
so that SPOUT (3) is locked in place.
• Install PLUG BUTTON (6).