Davis Instruments 8131 User manual

Brand
Davis Instruments
Model
8131
Category
Signal cables
Type
User manual
Configuration Cable for Wireless
Download Module Installation Manual
This installation manual describes
installing the Configuration Cable.
The Configuration Cable works with a
computer running DriveRight Fleet
Management Software (FMS) to
configure Wireless On-Board Modules
(#8129) for use in your fleet.
The Configuration Cable can be connected to any computer via a USB port.
The unit is compatible with DriveRight FMS version 3.7 or later. To connect
the Configuration Cable to your computer:
1. Update FMS to 3.7 or install the FMS software if necessary. Install the
Configuration Cable drivers following the instructions provided in the FMS
Online Help.
2. Locate a free USB port
on your computer and
connect the USB con-
nector to the port.
3. Insert the USB- Mini B
connector into the USB
slot of the configura-
tion cable.
4. Connect the Wireless
On-Board Module to
the Configuration
Cable by plugging in
the male connector into
the socket on the Con-
figuration Cable.
5. Follow the FMS
Online Help instruc-
tions for configuring
the Wireless On-Board
Module.
USB Port
Wireless
On-Board Module
#8129
Configuration Cable
#8131
Product Number: 8131 Part Number: 7395.227
Configuration Cable for Wireless On-Board Module Rev. A (September 5, 2006)
This product complies with the essential protection requirements of the EC EMC Directive 89/336/EC.
Copyright
©
2006 Davis Instruments Corp. All rights reserved.
Configuration Cable Specifications
Size . . . . . . . . . . . . . . . . . . . . . . . . . 3.7" x 2.3" x 1.0" (94 mm x 58 mm x
25 mm)
Weight . . . . . . . . . . . . . . . . . . . . . . . 2 Oz.
Operating range . . . . . . . . . . . . . . . . -40°F to +185°F (-40°C to 85°C)
Storage range . . . . . . . . . . . . . . . . . . -40°F to +194°F (-40°C to 90°C)
Electrical Specifications
Powered by. . . . . . . . . . . . . . . . . USB
Typical current . . . . . . . . . . . . . . 30mA
Connectors
For USB Cable . . . . . . . . . . . . . . USB Mini-B
For Wireless On-Board Module . . 7 Pin locking Mini-DIN
Cable
Length. . . . . . . . . . . . . . . . . . . . . Length 96'' (2.4m)
Cable Type . . . . . . . . . . . . . . . . . USB A to Mini-B
Agency certifications . . . . . . . . . . . . . FCC, IC, CE
Contacting Davis Technical Support
If you have questions or encounter problems installing or operating
Configuration Cable, please contact Davis Technical Support.
Note: Please do not return items to the factory for repair without prior authorization.
Phone Support
(510) 732-7814 – Monday - Friday, 7:00 a.m. - 5:30 p.m. Pacific Time.
(510) 670-0589 – Fax to Technical Support.
E-mail Support
[email protected] – E-mail to Technical Support.
[email protected] – E-mail to Davis Instruments.
Web Support
www.davisnet.com – Copies of User Manuals and Installation Manuals
are available on the “Support” page. Watch for FAQs and other updates.
  • Page 1 1
  • Page 2 2

Davis Instruments 8131 User manual

Brand
Davis Instruments
Model
8131
Category
Signal cables
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents