Configuration Cable for Wireless
Download Module Installation Manual
This installation manual describes
installing the Configuration Cable.
The Configuration Cable works with a
computer running DriveRight Fleet
Management Software (FMS) to
configure Wireless On-Board Modules
(#8129) for use in your fleet.
The Configuration Cable can be connected to any computer via a USB port.
The unit is compatible with DriveRight FMS version 3.7 or later. To connect
the Configuration Cable to your computer:
1. Update FMS to 3.7 or install the FMS software if necessary. Install the
Configuration Cable drivers following the instructions provided in the FMS
Online Help.
2. Locate a free USB port
on your computer and
connect the USB con-
nector to the port.
3. Insert the USB- Mini B
connector into the USB
slot of the configura-
tion cable.
4. Connect the Wireless
On-Board Module to
the Configuration
Cable by plugging in
the male connector into
the socket on the Con-
figuration Cable.
5. Follow the FMS
Online Help instruc-
tions for configuring
the Wireless On-Board
Module.
USB Port
Wireless
On-Board Module
#8129
Configuration Cable
#8131
Product Number: 8131 Part Number: 7395.227
Configuration Cable for Wireless On-Board Module Rev. A (September 5, 2006)
This product complies with the essential protection requirements of the EC EMC Directive 89/336/EC.
Copyright
©
2006 Davis Instruments Corp. All rights reserved.
Configuration Cable Specifications
Size . . . . . . . . . . . . . . . . . . . . . . . . . 3.7" x 2.3" x 1.0" (94 mm x 58 mm x
25 mm)
Weight . . . . . . . . . . . . . . . . . . . . . . . 2 Oz.
Operating range . . . . . . . . . . . . . . . . -40°F to +185°F (-40°C to 85°C)
Storage range . . . . . . . . . . . . . . . . . . -40°F to +194°F (-40°C to 90°C)
Electrical Specifications
Powered by. . . . . . . . . . . . . . . . . USB
Typical current . . . . . . . . . . . . . . 30mA
Connectors
For USB Cable . . . . . . . . . . . . . . USB Mini-B
For Wireless On-Board Module . . 7 Pin locking Mini-DIN
Cable
Length. . . . . . . . . . . . . . . . . . . . . Length 96'' (2.4m)
Cable Type . . . . . . . . . . . . . . . . . USB A to Mini-B
Agency certifications . . . . . . . . . . . . . FCC, IC, CE
Contacting Davis Technical Support
If you have questions or encounter problems installing or operating
Configuration Cable, please contact Davis Technical Support.
Note: Please do not return items to the factory for repair without prior authorization.
Phone Support
(510) 732-7814 – Monday - Friday, 7:00 a.m. - 5:30 p.m. Pacific Time.
(510) 670-0589 – Fax to Technical Support.
E-mail Support
[email protected] – E-mail to Technical Support.
[email protected] – E-mail to Davis Instruments.
Web Support
www.davisnet.com – Copies of User Manuals and Installation Manuals
are available on the “Support” page. Watch for FAQs and other updates.
/
