Danfoss 180F7038 User guide

180F7038
Danfoss
Brand
Danfoss
Model
180F7038
Type
User guide

This manual is also suitable for

ro-solutions.com
Instruction
Recommended service intervals
for APP 0.6-1.0 / APP 1.5-3.5 /
APP (W) 5.1-10.2 / APP 11-13 / APP 16-22
Instruction
iSave Energy Recovery Device
iSave 50 - 70
Recommended service intervals
hpp.danfoss.com
Instruction | Recommended service intervals for iSave 50 - 70 ERDs
2
AX290138222999en-000101 | 12.2018
1. General information This guideline provides information on the
recommended service intervals. The recommen-
dation is based upon good engineering practice
and on experience gained from operation even
under extreme conditions.
The recommendation is for guidance only.
Table of Contents
1. General information.....................................................................2
2. Design/features ........................................................................3
3. Service intervals ........................................................................3
3.1 iSave 50 - 70 ............................................................................3
Table of Contents
Instruction | Recommended service intervals for iSave 50 - 70 ERDs
3
AX290138222999en-000101 | 12.2018
2. Design/features Danfoss iSave ERD is designed for long operation
and low maintenance and life cycle costs.
Provided that the ERD has been running
according to the Danfoss specifications, Danfoss
guarantees one year service-free operation,
however, max. 18 months from date of
production. After one year of operation it is
recommended to inspect the iSave and replace
worn parts, if any.
If the Danfoss recommendations concerning
system-design (see our data sheet) are not
followed, the service life of the iSave ERD might
be affected.
The recommended service intervals on the differ-
ent parts in the iSave ERD appears from the table
below:
3. Service intervals
3.1 iSave 50 - 70
Description
1)
Service interval Service interval (2nd, 3rd)
Tool kit)
Screw and seal kit 32,000 hours 26,000 hours
Shaft seal kit 32,000 hours 26,000 hours
Coupling kit 56,000 hours 56,000 hours
Port plate kit PE iSave 50 32,000 hours 26,000 hours
Port plate kit PE iSave 70 32,000 hours 26,000 hours
Vane kit (8 pcs)
Valve plate kit, Pressure exchanger 32,000 hours 26,000 hours
Rotor elements and sealing plates kit 32,000 hours 26,000 hours
1)
For detailed information on parts, see
Service guide 521B1428 Parts list.
Danfoss A/S
High Pressure Pumps
Nordborgvej 81
DK-6430 Nordborg
Denmark
© Danfoss | DCS (im | 2018.12
AX290138222999en-000101 | 4
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Danfoss 180F7038 User guide

180F7038
Danfoss
Brand
Danfoss
Model
180F7038
Type
User guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents