Toro Auxiliary Wire Harness Kit, TXL 2000 Tool Carrier Installation guide

Type
Installation guide
FormNo.3430-985RevB
AuxiliaryWireHarnessKit
TXL2000ToolCarrier
ModelNo.139-1186
ModelNo.139-1188
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
Preparethemachine.
Wireharness1
Lockwasher1
Connectornut
1
Couplingcover
1
2
Cabletie(telescopingmodelsonly)
1
Installthewireharness.
Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
1
PreparingtheMachine
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurface.
2.Lowertheloaderarms.
3.Shutofftheengineandremovethekey.
4.Opentherear-accesscover.
5.Turnthebattery-disconnectswitchtotheOFF
position(Figure1).
g261512
Figure1
1.Battery-disconnect
switch—OFFposition
2.Battery-disconnect
switch—ONposition
©2020—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3430-985*
2
InstallingtheWireHarness
Partsneededforthisprocedure:
1Wireharness
1Lockwasher
1
Connectornut
1
Couplingcover
1
Cabletie(telescopingmodelsonly)
Procedure
1.Removetheplugfromanaccessoryconnector
(P50,P75,orP76)onthemachinewireharness
andplugtheaccessoryconnectorfromthe
auxiliarywireharnesstoit.
g282599
Figure2
1.Accessoryconnectorfrom
auxiliarywireharness
2.Accessoryconnectors
frommachinewireharness
2.Plugtherockerswitchconnectorfromthe
auxiliarywireharnesstotheaccessoryrocker
switchconnector(P91)onthemachinewire
harness,nearthejoystickconnector.
g338607
Figure3
1.Accessoryrockerswitch
connector(P91)from
machinewireharness
3.Joystickconnector
2.Rockerswitchconnector
fromauxiliarywireharness
4.Optioncontrolconnector
(usedwithsome
accessories)
3.Routetheendwiththeattachmentconnector
alongtheauxiliaryhydraulichoseouttheleft
sideofthemachineframetotheleftloaderarm.
g282757
Figure4
1.Auxiliaryhydraulichose2.Wireharness
2
4.Continueroutingthewireharnessdownthe
loaderarm(Figure5orFigure6).
Note:Fortelescopingmodels,removethe
crossbarsonthehosecarriertoroutethewire
harnessalongthehoses,theninstallthecross
bars.
g282760
Figure5
Telescopingmodel
g282759
Figure6
Non-telescopingmodel
5.Securetheconnectortotheemptyholeinthe
couplermountusingalockwasher,connector
nut,andcouplingcover.
g338626
Figure7
Hosettingsnotshownforclarity
1.Couplingcover
3.Lockwasher
2.Connectornut4.Connector
6.Fortelescopingmodels,securethewireharness
tothehydraulichosettingsusingacabletie.
g283190
Figure8
1.Cabletie
7.Turnthebattery-disconnectswitchtotheON
position(Figure1)andclosetherearcover.
3
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Toro Auxiliary Wire Harness Kit, TXL 2000 Tool Carrier Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI