Instruction Manual
TV Wireless Headphones - BH7TVG
General Safety Instructions 4
Product Overview 6
First Time Setup 9
Using RCA/3.5mm Cable 10
Using Optical Cable 11
Audio Passthrough 12
Using RCA/3.5mm Cable 12
Using Optical Cable 13
Check TV Settings 14
General Operation 15
First Time Use 15
Troubleshooting Last Page
Specifications Last Page
Support Information Last Page
CONTENTS
4
Read this manual thoroughly before you start using the headphone.
Store this manual, the completed warranty card, your receipt and the
product packaging. The safety precautions instructions reduces the
risk of fire, electric shock and injury when correctly complied to.
Please follow all instructions and take notice of all warnings.
• Only using furniture that can safely support the Products.
• Ensure the Product is not overhanging the edge of the supporting
furniture.
• Do not temper or change or modify the product in any way.
• Only use Accessories outlined and recommended by the manufacturer.
• Please do not expose the product to splashing or water contact
• Please do not place any object on top of the product
IMPORTANT INFORMATION
GENERAL SAFETY INSTRUCTIONS
5
WARNINGS
Read the below warnings thoroughly before your start using your
headphones. Store this quick start guide, warranty and receipt
alongside with product packaging.
To reduce the risk of injury:
• Keep batteries out of reach of children.
• Do not heat, open, or dispose of battery pack in fire.
• Do not allow metal objects to touch the battery on the device.
• Do not expose battery pack to excessive heat.
GENERAL SAFETY INSTRUCTIONS (Cont.)
6
PRODUCT OVERVIEW
7
PRODUCT OVERVIEW (Cont.)
8
PRODUCT OVERVIEW (Cont.)
9
FIRST TIME SETUP/USE
1. Connect the power adaptor into the wall outlet. Connect the
other end of the power adaptor (micro USB) into the Charging
Stand Base.
2. Place the headphones on the top of the charging base. Make sure
that both indicator lights are facing towards you on the Headphone
and the Charging Stand Base.
- When charging correctly, both indicator lights will stay RED.
3. When headphones are completely charged, indicator light will
turn o.
- Headphones will automatically turn o after 5 mins of inactivity.
10
Connecting to TV - RCA
USING RCA/3.5mm CABLE
1. Connect the white and red plugs (included) into the TV White and
Red Audio Out Plugs.
Note: Make sure L/R (white/red) plugs are not inserted into the
TVs Audio INPUT
2. Connect the other end 3.5mm Jack into the Sterio IN jack on the
charging stand base.
NOTE: You can also use a 3.5mm to 3.5mm AUX Audio cable (not
included) to connect the TV to the Stand charging base.
11
Connecting to TV - Optical
USING OPTICAL CABLE
1. Connect the optical cable plug (not included) into the TV
optical port.
2. Connect the other end optical port into the Optical port on
the charging stand base.
12
Audio Passthrough
EXPLANATION OF AUDIO PASSTHROUGH
Audio passthrough allows for you to pass AUDIO from your TV,
Through your headphones to an external speaker device such as a
soundbar.
Please see the below 2 options of audio passthrough through RCA
or Optical:
NOTE: Only 1x Audio RCA (white/white) to 3.5mm Jack is supplied.
RCA / 3.5MM AUDIO PASSTHROUGH
13
Audio Passthrough (Cont.)
OPTICAL AUDIO PASSTHROUGH
Please note optical cables are not supplied.
14
Audio Passthrough (Cont.)
CHECK SETTINGS OF YOUR TV FOR AUDIO PASSTHROUGH
If you have a soundbar or other audio equipment already connect to
your Television. Using your Stand base headphones to pass through
the audio while allowing you to still use the headphones is one of the
benefits of this product.
NOTE: If you already have STEREO IN port used on charging base, the
Optical Port will not function.
1. Make sure the home theatre or stereo system is set to the
appropriate audio output for the optical connect and that the
optical cable is plugged in to both devices correctly.
2. On the TV, Go to the SOUND menu and adjust TV settings to
EXTERNAL SPEAKERS or adjust your AUDIO SYSTEM / Digital
Audio output to PCM.
NOTE: Audio settings varies depending TV brand and manufacturer.
This Guide is just a very generic example of what to look for.
15
General Operation
POWER ON/OFF
1. Press and hold the power button
(2 seconds) until the Headphone
indicator turns blue (indicating device is on).
2. Press and hold power button to power o.
NOTE: When placing headphones onto the
stand base charging pins, the headphones
will automatically turn o.
FIRST TIME USE
1. When headphones are charged and you remove from the
stand base. Place the headphones on your head and press and
hold the power button to turn on the headphones.
2. Once turned on, wait up to 10 seconds for the Headphones and
Stand base to SYNC. When completed SYNC, the indicator lights
will light up solid blue and headphones will make a BEEP noise 3 times.
3. Now that your HEadphone and Stand base are SYNCED.
You can now begin to watch and listen to your TV.
TROUBLESHOOTING
Never try to repair the product yourself. If you encounter any problems
when using this unit, check the following points before seeking for service.
Problem Solution
No Power • Ensure that the supplied external power
adaptor is connected to power socket outlet.
• Ensure that there is power at the AC outlet.
• Press standby button to turn the unit on.
No response
from the unit
• Disconnect and reconnect the power
plug, then turn the unit on again.
My headphones
are not sync-
ing with the
charging stand
base
1. Turn the charging base upside down. press the
Pairing button indicated on page 8 and Mute
button on headphones indicated on page 7 of
this manual at the same time for about
3 seconds, the power led will start flashing.
Wait until the indicator lights stay on steady
2. Follow the first time use instructions indicated
on page 15 to SYNC the headphones with the
stand base.
SPECIFICATIONS
Power Supply DC 5V 1A
Speaker Driver 40mm
Frequency Response 20Hz~20KHz
Wireless Connectivity 2.4 GHz
Working Time Up to 10 Hours
Charging Time Up to 3 Hours
Weights Net: 0.2 kg
CUSTOMER SUPPORT:
info@ayonz.com
DISTRIBUTED BY:
Ayonz Pty Ltd
/