Pro-Elec PEL01337 Operating instructions

Type
Operating instructions
1
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.
When using electrical appliances basic safety precautions should always be
followed.
Check that the voltage indicated on the rating plate corresponds with that of the
local network before connecting the appliance to the mains power supply.
Safety Information for Installation and Operation
Avoid excessive force when installing.
Always install on a surface that can support the weight of the xture.
Plastic Bulkhead Lamp
Model: PEL00829 and PEL01337
2
Turn off or isolate the mains supply.
Remove the lens and retainer by removing 1 screw.
Offer the rear part of the unit to the wall in the desired
position with reference to the supply wiring and mark
the location of the 2 mounting holes.
Drill the wall where marked and t the wall plugs.
Feed the supply wiring through the access point in the
main body and x the main body onto the wall using
the screws.
Connect the mains wiring as follows:
Connect the positive supply wire (brown or red)
to the terminal marked L.
Connect the neutral supply wire (blue or black)
to the terminal marked N.
Fit an appropriate lamp E27 Max 11W (not supplied).
Attach the lens and retainer onto the main body and
tighten the screw.
Restore the mains supply.
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical
& Electronic Equipment (WEEE). Any WEEE marked products must not be mixed with
general household waste, but kept separate for the treatment, recovery and recycling
of the materials used. Contact your local authority for details of recycling schemes in
your area.
Made in China. PR2 9PP
Man Rev 2.0
SPECIFICATIONS
CLEANING AND MAINTENANCE
Clean only with a damp cloth with a little liquid detergent. Do not use any
chemicals, abrasives or solvents that may damage the product.
Voltage 220-240V~50Hz
IP rating IP44
Lamp type E27 11W Fluorescent or LED
Brown
Blue
INSTALLATION
  • Page 1 1
  • Page 2 2

Pro-Elec PEL01337 Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI