300 lbs
product.
product. product.
product.
ASSEMBLY STEPS
Step 1
O and J.Match the one(1) holes of part J
and the other include O part. Insert the
Match the one(1) holes of parts
screws and twist by L. Do not fully tighten
all screws until assembly is complete.
Step 2Match the two(2) holes of parts
J and P,match the four(4) holes of parts
O and P.insert the screws and twist by L.
Insert and tighten all the screws.Ensure
the table is stable,then place the glass on
top.
Screws Assembly Steps
match the two different
holes insert screws tighten the screws by
included wrench
Important: Do not fully tighten all screws until assembly is complete.
J
J
O
O
O
O
JJ
O
OO
O
P
P
PP