KJB F40709001 User manual

720P Wifi Tissue Box

- HD Wifi Camcorder -

User Manual

Ver. 2.2.0

F40709001

Table of Contents

Table of Contents ................................................................................................................................... - 1 -

Quick Start Guide ................................................................................................................................... - 3 -

Diagram ................................................................................................................................................... - 4 -

LED Indicator Status .............................................................................................................................. - 5 -

How to Charge The Battery .................................................................................................................. - 5 -

Compatible Storage ............................................................................................................................... - 7 -

Software & hardware specifications on PC/mobile devices ............................................................ - 8 -

WiFi tissue box setup instruction ......................................................................................................... - 9 -

(I) Device setting ............................................................................................................................ - 9 -

(II) EZ-SEE software instruction (On PC or laptop) ................................................................ - 11 -

(III) EZ-SEE APP Instruction (On Smart Device) .................................................................... - 25 -

Specification .......................................................................................................................................... - 44 -

- 2 -

Thank you for purchasing our 720P Wifi Tissue Box (CH0709c). Please read this

manual before installation.

For customer support, contact your dealer, keep your Invoice for further support.

Do not open/modify the device, as it may cause damage to the unit and

void the Warranty. For internal repairs, consult your dealer or an Authorized

Service Center.

Do not use any accessories other than what comes with the unit otherwise, it

would void the warranty.

Protect from humidity. Do not put it in water and be careful to protect it from

rain, sea water, or high humidity environment etc.

Protect from high temperatures

To avoid damage or mis-operation of the device, only use in temperature of 0 ~

+40°C.

Do not bring the device suddenly from a hot to a cold place, or vice versa. This

may cause damaged to the inside of the unit by creating condensation.

EU Environmental Protection

The symbol of crossed-out garbage shows that this product should not be treated

as household waste, and it falls into the category of electric /electronic

equipment for recycling. This electronic device should not be disposed in a

regular trash. We strongly advice you to contact related authorization before

you dispose this product.

- 3 -

Quick Start Guide

- 4 -

Diagram

Appearance

Perspective

- 5 -

LED Indicator Status

* LED will light up when you turn the power switch to "ON", and then LED will follow below

behaviour,

Power Indicator

(Red LED)

On 1

Power on:

P-to-P Mode

Blinking 2

Slow Blinking (1s) :

Internet Mode

Off 3

Power off

SD Card

Indicator

(Green LED)

On

System ready and Micro

SD card is working

normal

Blinking

Fast Blinking (0.25s) :

SD Card Full (FS mode)

Off

Micro SD card is

abnormal or not

working

Blinking

Slow Blinking (1s) :

Recording

Battery Indicator

(Yellow LED

Device: on)

On

Powering or Battery full

of charge

Blinking

Fast Blinking (0.25s) :

less than 20% (around)

battery power left

Off

N/A

Slow Blinking (1s) :

more than 20%

(around) battery power

Battery Indicator

(Yellow LED

Device: off)

On

Powering

Blinking

N/A

Off

Battery full of

charge

Notice:

1. The Power Indicator (Red LED) will always "ON" if the CH0709c is working as P-to-P mode.

2. The Power Indicator (Red LED) will "Blinking (once a second)" if the CH0709c is working as

Internet mode.

3. When device power off, the Red LED will off.

How to Charge The Battery

Connect the provided power adapter with the cradle. The charging time is around 3 hours and

the green LED will be on. The battery, after fully charged, can last for 6.5 hours at least under

continuous recording without wifi transmission. However, the battery power will be dramatically

reduced when recording with IR LED especially at night as well as with Wifi transmission

(around 3-4 hours). Under PIR motion activation or power saving mode, 720P Wifi Tissue Box

can last for longer.

* NOTE: Under low temperature conditions, the battery will have a shorter life than normal.

* NOTE: Please use the bundled power adapter only. Damage which is caused by other power

adapter will be beyond warranty.

* NOTE: For better performance it is recommended to charge the battery once every 3 weeks.

* NOTE: please re-charge the battery to full when receiving CH0709c.

- 6 -

Package Contains

CH0709 Main Unit x 1

3.7V 4800mA Li-polymer Battery x 1

Power Adapter & Cradle x 1

- 7 -

Compatible Storage

In order to work properly, below micro SD card brands are highly recommended.

* Apacer

* Toshiba

* Sandisk

* Kingston

Micro SD card Class 6 or above is highly recommended, and will have smoother footage.

Please format the micro SD card or SD card by the 720P DVR series first before recording.

IMPORTANT:

1. Please format the memory card by tissue box first before recording.

2. Please put memory card inside the storage lot first before starting to use the

device.

3. Tissue box will turn off automatically under below situation.

 No memory card put inside

 Press menu button in playback mode

 Out of OSD

 Card full when storage mode is fullstop.

 Schedule setting is “none”

- 8 -

Software & hardware specifications on PC/mobile devices

To use the remote viewing on PC, we highly recommend you to have the following software and

hardware specifications on your PC.

Microsoft® Windows XP, Windows 7, Windows 8 (.NET Framework 3.5 higher)

CPU: 2.0GHz or higher (only support x86 and x64)

Memory: 1GB (up)

Display card: Independent display card and support DirectX 9.0 or higher.

To use the remote viewing on mobile devices, we highly recommend you to have the following

software and hardware with your devices.

iPhone 3GS or higher

iPad

iOS 5.1 or higher

Android 2.3 or higher

- 9 -

WiFi tissue box setup instruction

(I) Device setting

Step1. Turn on the device and wait 1 minute for WiFi module working.

Step2. Please check the ID number on the sticker outside the box (eg. 20000001).

- 10 -

Step3. In your WiFi list, you will see the ID in your WiFi list. Please connect with the device

directly. Link the device with your PC or laptop. Default WiFi password of CH0709c is

888888888.

(1) Setup by PC or laptop

(2) Setup by Smart devices

Android iOS

- 11 -

(II) EZ-SEE software instruction (on PC or laptop)

Note: PC or laptop need to have wireless network card.

Please install “EZ-SEE” software on your laptop / PC (be aware that PC or laptop should

have wireless network card). You will find the software shortcut on your desktop.

PC EZ-SEE Interface Overview

Camera Status Display Live view image Minimize/Full screen/Exit

Recording Fast Rewind Stop Volume

Open File Play Fast Forward

Caution!!

Home wireless security surveillance has risk. According to different location, it will cause the internet environment

occasionally unstable and further to fail connected, as well as, fail to receive immediate intruder alert message.

Therefore, please caution to use the wireless surveillance products.

Setting

Info

Snapshot

Video Cut

Camera List

Camera Status

- 12 -

A. Network connection setting

(1)Point to Point Connection (Device connect with PC or laptop with wireless network

card directly)

Step1. Adding camera into list

a. Via Camera ID list.

When running the EZ-SEE PC software, there will a "Camera ID List" popup on the

screen. Click the "Camera ID" you would like to install on the list and confirm the

setting.

Enter the password of your device and press Confirm. Default WiFi password of

CH0709c is 888888888.

- 13 -

b. Manually input.

Press button in right side of EZ-SEE software. Below popup message will

come up. Input ID / Camera Name / User Name / Password and save the

information.

Step2. Press button again. Select the ID you would like to connect in the Camera list

and click "Live" for live-viewing.

- 14 -

Step3. Software will link to CH0709c.

Step4. Point to point connection is done and remote live view is seen. You will see Network

status is “p2p connection”.

(2)Internet mode Connection (You can see remote live view of WiFi tissue box via router

by Internet mode connection)

Note: Point to Point connection need to be done first.

Step1. When Point to Point connection is done, a pop up message will come up to ask if you

would like to connect to internet for remote live-view. If selecting “Later”, pop up message will

come up in next Point to Point connection.

- 15 -

Step2. When selecting “Yes”, EZ-SEE software will start to detect all available Wireless Router

and list as below.

Step3. Select the Router you would like to connect with CH0709c and password pop up

message to come up.

Step4. After password confirmation, EZ-SEE software will start internet mode setting for

CH0709c with the router you chose. Below popup message will come up for your

reconfirmation. Please press “Confirm”.

- 16 -

Step5. When all setting is done, live view will stop and screen will be black. CH0709c will

reboot for WiFi setting. Please wait 1-2 minutes.

Step6. Press button. Select the ID you would like to connect in the Camera list and click

"Live" for live-viewing.

Step7. You will see Network status is “Internet connection”. Internet mode setting is done.

Step8. You can "Stop" the live-viewing when clicks stop button .

- 17 -

B. Other setting on EZ-SEE software on PC or laptop

Camera Status Display Live view image Minimize/Full screen/Exit

Recording Fast Rewind Stop Volume

Open File Play Fast Forward

(1) Setting

EZ-SEE settings

Setting

Info

Snapshot

Video Cut

Camera List

Camera Status

- 18 -

 Snapshot – the snapshot file saved link. You can press to change file saved

place. If you select when opening the folder after saving file, folder will be

opened for you to check file easily. If selecting , folder will not be opened.

 Video – the video cut file saved link. You can press to change file saved

place.

 Backward – You can set up the time period to be jumped when you press

button. Default setting is 5 seconds.

 Alarm – Switch to enable the intruder alert, which will send a warning

message when movement is detected. Switch Auto-liveview to show

remote live view automatically when alert is received.

If you choose Yes, live view will keep on. If you choose No, reminding message

will show for you to reconfirm again.

 Tool tips –If selecting , icon name will be visible. When selecting ,

icon name will be hidden.

- 19 -

Camera settings

Note: Network connection need to be done first. If connection is failed, you will not

see this page.

You can do Remote Configuration to adjust the camera parameters wirelessly.

Camera parameters

Adjustable value

 Framerate

1, 2, 3, 4, 5, 10, 15

 Resolution

HD, D1

 PIR post recording

2 min, 4 min, 6 min, 8 min

 Storage mode

Overwrite, Fullstop

 LED indicator

ON, OFF

 Recording audio

ON, OFF

"OFF" will mute the video recording.

 Buzzer

ON, OFF

"OFF" will mute the setting sound.

Page is loading ...

KJB F40709001 User manual

KJB F40709001 User manual

Other documents