2. SMITH SYSTEM
  3. 179911

SMITH SYSTEM 179911 Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Elemental Table. This document includes information on the necessary components, assembly steps, and special notes. I can answer any questions you might have about assembling your table, including adjusting it's height. Just ask!
  • What should I do if I have damaged or missing components?
    Where should I assemble the table?
    How do I adjust the leg height?
Form# 179911
3/2019
Assembly Instructions
Elemental Tables
If you have damaged or missing components,
Please contact customer service at 1-800-328-1061
*Elemental Table available in numerous shapes and sizes. Picture does not necessarily represent parts received.
Form# 179911
11/2019
ELEMENTAL TOP
QTY. 1
(SHAPE AND SIZE DEPEND ON ORDER)
Hardware and Components
Special Notes:
•Check that all components are accounted for and undamaged before assembling.
•Please assemble the product in a clean and dry area.
•For larger units you may need another person to help assemble the product.
•Clean the product with a mild cleaner and a damp cloth.
ELEMENTAL LEG SET
P/N – 78973, 78974, 78976, 78977, 78975
QTY. 3-6 (DEPENDS ON TOP SHAPE)
#10X3/4” WOOD SCREW
P/N – 70054
QTY. 10 PER LEG
Form# 179911
11/2019
Assembly Instructions
Step 1: Flip the top over and identify predrilled pattern.
Step 2: Align table leg with pattern and install 10 screws. Repeat for each leg.
Form# 179911
11/2019
Step 3: For adjustable height legs only. Adjust the leg height as needed by loosening the set
screw in the leg (use the provided hex key to loosen). Tighten the set screws. Hand tighten, do
not use power tool, to tighten set screw to ensure screw is correctly located in the insert hole.
DONE
/