2. AccuBANKER
  3. D470
D470

AccuBANKER D470, D585 Template

  • I've reviewed the instructions for using the IR calibration template and understand the process of cutting and using them to calibrate a machine. The document provides specific direction for paper insertion. I am ready to answer any questions you have about this device.
  • How many templates should I cut?
    Where should I insert the calibration paper?
Insert calibration paper towards left edge of machine.
Insert calibration paper towards left edge of machine.
Insert calibration paper towards left edge of machine.
Please cut one of these IR calibration template and keep the remaining two as spare
Please cut one of these IR calibration template and keep the remaining two as spare
Please cut one of these IR calibration template and keep the remaining two as spare
/