1
TPC121/150/170/190-SB
Installation Guide
www.dfi .com
• 1 TPC121/150/170/190 Panel PC
• 1 120W power adapter
(only for models below:
TPC-1212TR-SBDCR-R10
TPC-1502TR-SBDCMR-R10
TPC-1502TR-SBDCMR-R11
TPC-1702TR-SBDCMR-R10
TPC-1702TR-SBDCMR-R11
TPC-1902TR-SBDCMR-R10
TPC-1902TR-SBDCMR-R11)
• 1 Quick Installation Guide
• 1 CD disk includes:
- Drivers/Manual
•
Wall Mount
•
Panel Mount
•
Power Cord
Package Contents
Optional Items
2
Installing a SATA Drive
1. Locate the SATA drive bay in the chassis.
SATA drive bay
TPC121/TPC190-SB
TPC150/ TPC170
SATA drive bay
3
2. Remove the mounting screws that secure the HDD
bracket to the drive bay.
Mounting Screw
TPC121/TPC190-SB
TPC150/ TPC170
Mounting Screw
4
3. Align the mounting holes of the SATA drive with the
mounting holes on the HDD bracket and then use the
provided mounting screws to secure the drive in place.
HDD bracket
4. Place the SATA drive (with HDD bracket) back into
place. Align the mounting holes on the HDD bracket
with the mounting holes on the SATA drive bay and
then use the provided mounting screws to secure the
drive in place.
Mounting screws
k
e
t
SATA drive
M
ounti
n
Mounting screw
Mounting hole
HDD bracket
5
5. Connect one end to the SATA data connector on the
SATA drive and the other end to the SATA data
connector on the system board.
Mounting screw
Mounting hole
6
SATA data connector
SATA data
connector
SATA data connector
SATA power connector
SATA power connector
7
934-TPC121-0A0G
A24642503
Board Layout and Jumper Settings
Clear CMOS JP9
Normal (default) 1-2 On
Clear CMOS 2-3 On
PS/2 Power JP2
+5V (default) 1-2 On
+5V_standby 2-3 On
USB Power: 0-1/8-9 (JP4), 2-3/10-11 (JP7)
+5V (default) 1-2 On
+5V_standby 2-3 On
RS232/RS422/RS485 Select: COM 1 (JP1)
RS232 (default) 1-2 On
RS422 Full Duplex 3-4 On
RS485 5-6 On
COM 1 Signal Select JP3
Pin-9 is RI (default) 1-3 On
Pin-9 is VCC(+5V) 3-5 On
Pin-1 is DCD (default) 2-4 On
Pin-1 is VCC12(+12V) 4-6 On
LGA 1155
CPU FAN
1
1
ATX 12V
Intel WG82574L
ASmedia ASM1442
ASmedia ASM1442
PS2 KS/MS Power Select(JP2)
1
1
1
8
DIO
DIO Power
1
1
1
2
30
29
SDVO
Buzzer
PCIe x16
Intel
H61
1
Clear CMOS(JP9)
SATA 0
SATA 1
SATA 4
SATA 5
Battery
Mini PCIe
Standby power LED
1
1
10
11
20
ATX power
1
2
10
USB 10-11
1
System_Fan1
1
System_Fan2
USB 2-3
Front Panel
11
1
2
SPI Flash
BIOS
1
USB 2-3/10-11
power select(JP7)
KB_MS
USB 2.0 (0-1)
LAN 1
USB 2.0 (8-9)
LAN 2
COM 1
COM 2
DVI
HDMI
Mic-in
Line-in
Line-out
2
9
10
1
Front audio
1
COM1 RS232/422/485
Select(JP1)
COM1 signal select(JP3)
2
1
6
5
2
1
6
5
Front audio/
$XGLR$PSOL¿HU-3
2
6
5
1
DDR3_2 SODIMM
DDR3_1 SODIMM
USB 0-1/8-9 Power select
(JP4)
Chassis
intrusion
Power-on
Select (JP8)
Fintek
F71879F
Audio
$PSOL¿HU
ALC886
Front Audio or Audio Amplifi er JP5
Front Audio (default) 1-3 On
2-4 On
Audio Amplifi er 3-5 On
4-6 On
Power-on Select JP8
Power-on via power button (default) 1-2 On
Power-on via AC Power
Power-on via WOL After G3
2-3 On
-
1
-
2
-
3
-
4
-
5
-
6
-
7
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
DFI PIC-H61 Reference guide
-
-
-
-
DFI EC200-BT/EC210-BT/EC220-BT/EC221-BT Installation Guide User manual
-
-
-
-
-
