Haier L26V6-A8 Owner's manual

Please read this manual carefully

before operating the unit, and keep

it for future reference.

TFT-LCD COLOUR TELEVISION RECEIVER

OWNER'S MANUAL

This User's Manual is applicable for the following models:

L26V6-A8,L32V6-A8,L37V6-A8

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Warning

*To avoid electric hazards, it is strongly suggested that the back cover not be opened, as

there is no any accessory inside the casing.

*If necessary, please contact authorized after-sales services.

*A lighting flash mark in a triangle: A potentially hazardous situation, which, if not avoided,

could result in serious injury by high voltage.

*An exclamation mark in a triangle: Major part or accessory of which technical specifications

must be followed if it is to be replaced.

Warning:

To avoid fire or electric hazards, never place your television

receiver in an area with heavy moisture. Attention should be

paid to avoid accidental scratches or impacts onto the LCD

screen.

*Please read this manual carefully before using your television and keep this

manual in a good place for future reference.

*To achieve the best performance of your television, read this User's Manual

carefully and properly store it for future reference.

*Information of screen displays and figures in the User's Manual may vary due

to technical innovations.

Caution:

Unauthorized disassembly of this product is prohibited.

English-1

Table of Contents

.........................................................................................2

...............................................................................................4

.......................................................................................4

...................................................................................5

........................................................................................5

........................................................................................6

...........................................................................................7

...............................................................................8

...............................................................................................9

............................................................................................................9

......................................................................................................10

.......................................................................11

Manual ...........................................................................................11

Tuning program...............................................................................................12

...............................................................................................12

................................................................................13

Program Ta le.........................................................................................................15

TV

.................................................................................................15

...................................................................................16

..............................................................................................18

Function

Function ............................................................................................20

...................................................................................................24

Lock setup....................................................................................................26

Teletext functions.........................................................................................29

...............................................................31

.........................................................................32

................................................................................................33

.............................................................................................34

Safety precautions

Keys and ports

Front control panel

Side AV panel...........

Rear panel...........

Rear terminal row

Remote controller

Keys of remote controller

Operation instructions...................................................................................9

Power On/Off

Menu

Preset TV program ..........................................................................................10

TV input

Auto search.........................

search..

Program edit

Program play..................................................................................................13

How to select program

/SCART1/SCART2/AV/HDTV/VGA/DVI play...........................................15

Input option

Picture quality setup......................................................................................16

Picture quality setup

Sound adjust................................................................................................18

Sound adjust

setup...............................................................................................20

setup

Other functions............................................................................................22

Timer setup

Connection of external AV devices

Connection as PC monitor

Specifications

Troubleshooting

b

English-2

Safety precautions

The product should be tightly fixed to

avoid drop damages and even fire.

To avoid fire hazards, do not use this

product under direct sunlight or closely

to heat sources.

Do not locate the product close to water

or oil, which may cause fire hazards.

Unplug the power supply and antenna of

the product when there is a rainstorm,

especially thunderstorm.

Do not use damaged or worn electric

plugs, and keep electric cord away from

heat sources to avoid electric shocks or

fire hazards.

Do not connect excessive sockets in

parallel or share the same socket by

multiple plugs to avoid fire hazards.

The product must be placed on a solid

and stable surface to avoid collapse.

Unauthorized disassembly of the television

is prohibited to avoid electric shocks or fire

hazards. Contact authorized after-sales

service if technical service is needed.

Keep the product away from a transformer

or heat source to avoid fire hazards.

Disconnect the product from power supply

and contact authorized after-sales service

if abnormal sound is heard in the product.

English-3

Don't use or store inflammable

materials near the product to avoid

explosion or fire hazards.

Don't place the product in a humid area to avoid

fire hazards.

Safety precautions (continued)

The antenna of the product should

be away from electric cable to avoid

electric shocks.

Never touch the plug when your hand is wet

as this might cause electric shocks.

Always make sure that the television

is well plugged as poor electric

connection might cause fire.

When antenna is used, measures should be

taken to prevent water from flowing down along

the cable into the television.

Unplug the television, use soft fabric,

never chemicals, if you are going to

make cleaning of the product. Make

sure that no water drops in the product.

The plug and electric cable must be kept

clean to avoid electric shocks or fire hazards.

Disconnect the television from power

supply and antenna when there is a

rainstorm or thunderstorm to avoid

electric shocks or fire hazards.

Disconnect the television from power

supply to avoid electric shocks or fire

hazards in a long vocation.

English-4

Keys and ports

1.MENU: menu display

2.INPUT TV/AV): all input source display

3.CH-/CH+(P-/+) : program minus and plus , menu options

4.VOL-/VOL+(V-/V+): volume decrease and increase , menu reset

and entry

5. POWER : Is used to activate the display or return to standby

mode.

6.Power indicator: in red when standby mode, in blue when display.

7.Remote control signal receive window

Front control panel

English-5

Keys and ports

Rear panel

Rear terminal

AV IN

Side AV panel

Audio R

Audio L

Video

Keys and ports

1.Power: Power switch

2.AC power input

3.VGA IN

For PC display purpose. Connects to the VGA analog output

connector of the PC display card. And audio input terminal

connecting to the PC output terminal.

4.COMPONENT IN

is an video input terminal connecting to the video output

terminal of the video output device(Y Cb Cr/ Y Pb Pr). And

audio output terminal connecting to the audio output terminal

of the video output device.

5.DVI IN

For high quality PC display purpose. Connects to the DVI

digital output connector of the PC display card.

6-7.SCART2/SCART1

Used to connect to the DVD/ VCR/ broadcasting receiver or

other equipment.

8.Earphone port

9.ANT IN

Connect antenna or CATV 75 coaxial cable to receive TV/

CATV signal.

Rear terminal row

ANT IN

DVI

VGA

AUDIO

DVI IN

AUDIO

VGA IN COMPONENT IN

Pr/Cr Pb/Cb Y L-AUDIO-R

AC IN

SCART2 SCART1

English-6

English-7

Remote controller

Precautions

Battery loading

3

2

1

1.Slide open the cover of the battery compartment on the back of

the remote controller.

2.Load two 5# alkaline batteries in the compartment. (plus and

minus poles to respective mark)

3.Replace the cover of the battery compartment.

Make sure that there is no

obstacle between the remote

controller and television set.

As strong light may interfere the

signals, change your position to

operate the remote controller if

the television cannot be turned

on or off as you expect.

Keep the remote controller

away from heat source or

humid area to ensure

effective performance of

the remote controller.

Make sure that two 5# 1.5V alkaline

batteries are loaded. The batteries

must be of the same type. The batteries

must be located properly. The batteries

are not rechargeable.

English-8

The remote controller cannot be operated unless the batteries are

properly loaded.

1.STILL:Press this key to freeze-frame the

current screen and press again to continue

playing

2.I/II :TV audio mode selection

3.MUTE:Press to mute the sound and again

to reactivate the sound.Sound also reactivate

if the power off then on or the volume level

is changed

4.Press to switch off the TV to standby mode

but can not turn on the TV by this button)

5.SCAN:Use the key to let the television auto-

matically scan all preconcerted channel.

6.DISPLAY:Display ON/OFF

7.Sleep: Used to set time to change the TV

into the standby status after period of preset

time

8.PIP(No available)

9.Digits

Program direct option(when edit prog-

ram,every press can set different sign

by turns among the digits and sign on top

of them),also press these buttons to turn

on the TV from standby mode .

10.TV/AV : Press to display input source

11. SWAP

Switch the current channel to the last

channel you have viewed.

12.P.STD (Picture mode option)

13.S.STD (Sound mode option)

14.Program up and down, sound

increase and decrease, menu,

menu reset and back to the superst-

ratum . Also, you could press CH+/- to

turn on the TV from standby mode .

15-26 . Teletext buttons( buttons which have

letters on top also can be used in TV signal)

MUTE

DISPLAY

CH+

STILL

SLEEP PIP

TV/AV

P.STD S.STD

CH-

VOL- VOL+MENU

H.LOCK

CH.LIST EXIT

Keys of remote controller

SCAN

SWAP

TIMER ZOOM

20. Lock button(enter the Lock Set menu)

23. Channel list button, press to display the program that we had stored

24. Press to exit OSD menu

25. Timer display(only when there is teletext in TV signal)

26. Adjust picture aspect ratio

English-9

Operation instructions

Menu operating with remote controller)

Automatic standby

Under PC state, 1minutes later after no signals

are input, the television will enter standby status

automatically.

Power ON/OFF

1.Switch on power supply (indicator in red in

standby)

2.If the television is on standby mode , you could

press CH+/- or digits buttons on remote controller

or POWER button on the TV to turn on the TV.

3.If you want to switch off the TV to standby mode

press POWER button on TV or button on

remote controller .

4.Disconnect the power supply or unplug the

television if it is intended to completely cease the

television performance.

1.MENU: main menu entry, menu exit or return to

next higher level menu.

2.VOL+: next lower level menu entry.

3.VOL-/+: adjust item you have selected in menu.

4.CH+/-: option of next higher/lower level item.

5.If there is no operation, the display will disapp-

ear on the time of your set. Timer can be set 5 se-

conds , 10 seconds,15 seconds,20seconds, 25

seconds,30seconds and 40 seconds.

NOTE:To avoid data errors,switch on the television after

the indicator goes out after the television is swi-

tched off.

CH+

CH-

VOL- VOL+MENU

Preset TV program

English-10

TV input

Note:

If you have set Tuner Lock in Lock Set menu.

Password must be entered when operating menu

tuning. Otherwise there will be Tuner Lock display

on screen. The initial password of this television

is 0000.

Tuner Lock

TV/AV

CH+

CH-

VOL- VOL+MENU

1.Press INPUT button on television or TV/AV

on remote controller and the menu appears on

the screen

2.Press CH+/- button to swap to TV input terminal.

3.Press MENU button and then CH+ or CH- button

until the following menu appears on the screen.

Source

Auto

PICTURE

AUDIO

ADJUST

TUNING

FUNCTION

TIMER

MENU

Video Mode Personal

Contrast 50

Brightness

50

Saturation

Hue

Sharpness

BackLight

Noise Reduction

0

Manual Search

Preset TV program

CH+

CH-

VOL- VOL+MENU

CH+

CH-

VOL- VOL+MENU

1.Press CH+/- button on TURNING menu to select

Auto Search.(You could select country first according

to yourself(that means you have selected the sound

system ,this is useful especially for France) and then

you could operate Auto Search

2.Press VOL+ button on the remote controller for

automatic scan of programs with higher level.

The program on desired channel will be saved.

If excessive channel signals of unwanted programs

are received in local area, manual search function

is recommended.

After Tuning Program menu appears on the screen,

press CH+/- button to select Manual Search and

VOL+/- to enter and then press digits button to

adjust the frequency .

VHF-L 188.16 MHz

Auto search

PICTURE

AUDIO

ADJUST

TUNING

FUNCTION

TIMER

MENU

Program Number

Tuning Program

Edit Name

Color System

Sound System

Manual Search

Fine Tuning

Skip Off

0

150.22MHz

AUTO

D/K

English-11

Program edit

Note: Sound System can be adjusted in sequence

of D/K, I,B/G, M, L and L .

CH+

CH-

VOL- VOL+MENU

CH+

CH-

VOL- VOL+MENU

Press CH+/- button in TUNING menu for program

edit. Press VOL+ button to enter the submenu as

follows:

PICTURE

AUDIO

ADJUST

TUNING

FUNCTION

TIMER

MENU

Program Number

Tuning Program

Edit Name

Color System

Sound System

Manual Search

Fine Tuning

Skip Off

0

150.22MHz

AUTO

D/K

PICTURE

AUDIO

ADJUST

TUNING

FUNCTION

TIMER

MENU

Tuning Program

Auto Search

Program Table

Country England

Press MENU and then CH+/- to select TUNING as

follows:

1. Program Number

Press VOL-/+ on the remote controller for current

program option.

2.Edit Name

If current program is to be named, press VOL-/+

button to select position you want to change and

press digits to change.

Tuning program

English-12

English-13

Program play

How to select program

Tuning program

1.Select desired program

Select buttons in sequence

Press CH+/- button for program option. (Note:

If Skip is On on one channel, the channel will not

appear.)

Select buttons directly

Press digit button to select the program(If 2-

digit or 3-digit programs are selected , press digit

buttons you needed twice or three times within 3

seconds )

CH+

CH-

VOL- VOL+MENU

3.Skip

If current program number is to be skipped, press

VOL-/+ button to set Skip on.

4.Color System

If current program color is to be changed, press

VOL-/+ button and then the color system will

change in sequence of

5. Sound System

If current program sound is to be changed, press

VOL-/+ button and then the sound system will

change in sequence of L D/K I B/G M L.

Note: When channels are being scanned, sound

system will be automatically identified and set

according to television signals. If the sound system

is changed by manual operation, the correct sound

might not be broadcast.

6. Fine Tuning

If there is abnormal picture or sound in individual

program, press VOL-/+ button to make fine tune until

satisfactory picture and sound are achieved.

AUTO NTSC PAL

SECAM PAL60 NTSC443

English-14

Program play

How to select program (continued)

2. Press VOL+/- button to change sound volume.

3. Press MUTE button to silence television sound.

If you want to resume the sound, press MUTE

again or VOL+/-button.

4. If current program number, color system and

sound system are to be displayed on the screen,

press DISPLAY button, and all the related inform-

ation will appear at right up corner of the screen.

If the DISPLAY button is pressed again, the

displayed information will disappear.(If the program

is named, its name will also appear )

5. Audio Mode

Press S.STD button and the audio mode menu

will appear on the screen,then you can select the

modes in sequence by CH+/- as follows:

Music Standard Hall Personal Music

It is possible for users to select desired sound

mode for different television programs.

6. Video Mode

Press P.STD button and the video mode menu will

appear on the screen,then you can select the

modes in sequence by CH+/- as follows:

Bright Normal Soft Personal Bright

7. Off-time

a) Every press of SLEEP button, the timer will be

set in the following sequence:

05153060901200

b) If remaining time of set timer is to be displayed,

press the SLEEP button again.

8.NICAM

Press of the I/II button will result in fast swap of

NICAM function of current program.

MUTE

DISPLAY

CH+

STILL

SLEEP PIP

TV/AV

P.STD S.STD

CH-

VOL- VOL+MENU

H.LOCK

CH.LIST EXIT

SCAN

SWAP

TIMER ZOOM

TV/SCART1/SCART2/AV/HDTV/VGA/DVI play

Input option

TV/AV

1. Press TV/AV button on the remote controller,

the following menu will appear on the screen.

Source

2.Press CH+/- button to select TV or other source.

And VOL+/- button to enter.

Program Table

TV/AV

2.Red,Green, Yellow and Blue is the colored button

on the remote. And you could operate the Program

Table according to the words on the bottom of the

OSD.( Used to edit or delete the program name. eg:

press red button to display Are you sure to delete

then you could press MENU to enter and other buttons

to exit )

Program Table

Press CH+/- button in TUNING menu for Program

Table. Press VOL+ button to enter the submenu as

follows:

Program Table

Red:Del; Green: Copy; Yellow:Name; Blue: Swap

English-15

English-16

CH+

CH-

VOL- VOL+MENU

Picture quality setup

Picture quality can be adjusted in any channel.

The picture quality on the screen can be adjusted

as follows:

1.Press Menu button until the following menu

appears on the screen:

TV menu:

Note:Hue option of Menu will effect only in

NTSC system program.

AV/SCART1/SCART2/HDTV menu:

VGA /DVI menu:

Medium

PICTURE

AUDIO

ADJUST

TUNING

FUNCTION

TIMER

MENU

Video Mode Personal

Contrast 50

Brightness

50

Saturation

Hue

Sharpness

Backlight

Noise Reduction

0

Medium

PICTURE

AUDIO

ADJUST

TUNING

FUNCTION

TIMER

MENU

Video Mode Personal

Contrast 50

Brightness

50

Saturation

Hue

Sharpness

Backlight

Noise Reduction

0

Medium

PICTURE

AUDIO

ADJUST

TUNING

FUNCTION

TIMER

MENU

Video Mode Personal

Contrast 50

Brightness

50

Saturation

Hue

Sharpness

Backlight

Noise Reduction

0

(No available)

(No

available)

(No

available)

Only available

in NTSC system

Only available

in NTSC system

English-17

CH+

CH-

VOL- VOL+MENU

2. Press VOL+ button to enter PICTURE menu on which

the current option is in yellow. Press CH+/- to select desired

item.

3. After one item is designated, press VOL-/+ button to

adjust.

4. Repeat step 2 and 3 until satisfactory picture quality is

achieved. At the time of the Timeout arrival of the latest

operation, the menu disappears from the screen autom-

atically. (Also, you could press MENU or EXIT to exit it)

Picture quality setup

Page is loading ...

Haier L26V6-A8 Owner's manual

This manual is also suitable for

Haier L26V6-A8 Owner's manual

Related papers

Other documents