Hisense LCD3204EU User manual

Brand: Hisense

Model: LCD3204EU

Category: LCD TVs

Type: User manual

This manual is also suitable for

LCD3204

Hisense LCD3204EU is a high-quality 81cm LCD Colour TV that offers a wide range of features to enhance your viewing experience. With its sleek design and user-friendly interface, this TV is perfect for any home. The TV comes with a variety of connectivity options, including A/V inputs, a computer input, and an antenna input. This allows you to connect your TV to a variety of devices, such as DVD players, Blu-ray players, gaming consoles, and computers. The TV also features a built-in digital tuner, which gives you access to a wide range of digital channels.

The Hisense LCD3204EU has a number of features that make it easy to use. The remote control is well-designed and easy to navigate, and the on-screen menus are clear and concise. The TV also has a number of built-in features, such as a sleep timer and a parental lock.

Part No: IES050409

81cm LCD COLOUR TV

LCD3204EU

USER'S MANUAL

WELCOME TO THE PERFECT VIEW OF HISENSE LCD TV WORLD

Dear customer,

Thank you for choosing this LCD Colour TV. We expect our product and service will comfort you for long. This

manual is to guide you to set up and operate your TV as quickly as possible. Please read all the safety and operation

instructions carefully before you begin and then follow what the handbook tells.

CONTENTS

This is an IEC safety class I product and must be grounded for safety.

SAFETY CLASS

Important safeguard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Preparation for your new TV ................................ .......... .......... .......... .......... .......... ..... 3

Selecting a location for the TV .......................... .......... .......... .......... .......... .......... ..... 3

Learning about your TV................................. .......... .......... .......... .......... .......... ..... 3

Connecting your TV .................................... .......... .......... .......... .......... .......... ..... 5

Connecting to A / V equipments...................... .......... .......... .......... .......... .......... .....5

Connecting to a computer ........................... .......... .......... .......... .......... .......... ..... 5

Connecting to an antenna ........................... .......... .......... .......... .......... .......... .....6

Using the remote control.................................... .......... .......... .......... .......... .......... .....7

Preparing the remote control for use.................... .......... .......... .......... .......... .......... .....7

Learning about the remote control ...................... .......... .......... .......... .......... .......... .....8

Using the TV features....................................... .......... .......... .......... .......... .......... .....9

Understanding the TV features......................... .......... .......... .......... .......... .......... .....9

Basic operations ....................................... .......... .......... .......... .......... .......... .....9

Using the CHANNEL menu ............................ .......... .......... .......... .......... .......... .....11

Using the PICTURE menu............................. .......... .......... .......... .......... .......... .....12

Using the AUDIO SETTING menu ..................... .......... .......... .......... .......... .......... .....12

Using the PIP menu ................................... .......... .......... .......... .......... .......... .....12

Using the MENU LOCK SETTING menu .............. .......... .......... .......... .......... .......... .....13

Using the GENERAL SETTING menu ................ .......... .......... .......... .......... .......... .....14

Using the PC menu ................................... .......... .......... .......... .......... .......... .....15

Teletext operations.................................... .......... .......... .......... .......... .......... .....16

Appendix ................................................. .......... .......... .......... .......... .......... .....18

Troubleshooting ........................................ .......... .......... .......... .......... .......... ..... 18

Cleaning and Care ..................................... .......... .......... .......... .......... .......... ..... 19

Specifications .......................................... .......... .......... .......... .......... .......... ..... 20

CONTENTS

- 1 -

Design and specifications are subject to change without notice.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

IMPORTANT SAFEGUARD

FIRE AND SHOCK PRECAUTIONS

Adequate ventilation must be provided to prevent heat build up inside unit. Keep the inside of unit free

from foreign objects, such as hairpins, nails, paper, etc. Do not build the set into a bookcase or other

enclosures in which it would be poorly ventilated. Do not place it on carpet or a bed as low ventilation

boles could become obstructed.

Do not set liquids, including flower vases and vessels filled with chemicals or water etc., On top of the

unit as liquid could get inside the unit. If a hazardous object falls inside the TV set, unplug it immediately

and call a qualified technician for removal.

When placing or moving the TV set, take care to insure that the power cord is fitted into the allocated slot.

To avoid damage to the power cord, never allow heavy objects such as the TV set itself to be placed on

the power cord. Keep cord away from radiating appliances. Do not allow cord to become knotted or

tangled. Do not lengthen the cord. When removing the power plug from the socket, always hold onto the

plug, never pull by the cord.

WARNING

Do not remove the back cover of the TV set. Accidental contact with high voltage components could result

in electric shock. When internal adjustment is necessary, please contact your distributor.

If your set produces sound but no picture, or it emits smoke or produces a strange sound or smell, continue

operation is dangerous. Immediately turn off power and remove the power plug from the socket and

contact your distributor.

During vacation or other occasions when you will not be using the set for an extended period, remove the

power plug from the socket.

- 2 -

This TV set shall be connected to a main socket outlet with a protective earthing contaction

The main plug and main switch should be remain readily operable after installation

No naked flame sources,such as lighted candles, should be placed on the apparatus

Minimum distances around the apparatus for sufficient ventilation

The use of apparatus in moderate climates

The symbol of the dustbin barred means that this apparatus cannot be put at the

rebus with not sorted waste domestic running.

It is interdict to throw with not sorted waste domestic running, of deposited on the

public thoroughfare or at any other place not envisaged to this end. This apparatus

contains substances being able to be harmful for the environment.

The presence of certain substances can have harmful effects on the environment.

This apparatus profits from a specific treatment of recycling for the re-use of the matters which make it

up.

This apparatus must be thrown only to the places envisaged. Inform near your authority to know the

places of electronic collection of waste.

Your sale point must collect this apparatus against the purchase of a new one for its recycling.

The selective collection of waste electronics is to reduce the number of substance vermin not recycled

and to thus contribute to the environment.

The presence of certain substances can have harmful effects on the environment.

This apparatus profits from a specific treatment of recycling for the re-use of the matters which make it

up.

This apparatus must be thrown only to the places envisaged. Inform near your authority to know the

places of electronic collection of waste.

Your sale point must collect this apparatus against the purchase of a new one for its recycling.

The selective collection of waste electronics is to reduce the number of substance vermin not recycled

and to thus contribute to the environment.

Language english

General settings

Colour system

Noise reduce

Factory reset

Sleep timer

Deinterlacer

Plug & Play

When you start using your set for the

first time, the menu will

be displayed on the screen as shown

on the right.

1.Press the button to

select the OSD language.

2.Press the button to

select the language that you want

to use.

Plug & play

[CH+ or CH-]

[VOL+ or VOL-]

1).Press the [Menu] button to enter

the main menu.

2).Press the [VOL+ or VOL-] button

to slect the item General

settings as shown on the right.

3).Press the [CH+ or CH-] button to

select the Plug & play and press

the [VOL+ ] button to select this

function.

4).Turn on your TV again, the Plug &

Play menu will be displayed on the

Screen.

Notes: The Plug & Play menu is only displayed once when you

turn on the TV. If you want to select this menu, please follow the

instructions below:

OSD language Settings

Plug & Play

OSD language

English

Teletext Language

Colour system

Sound system

Auto search

West Europe

SECAM

AUTO

Selecting a location for the TV

1)Place TV on the floor or on a sturdy platform in a location where light does not directly hit the screen.

2)Place TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause

overheating, which may damage the TV.

NOTE: Please contact local dealer for wall mounting.

Preparation for Using your new TV

Learning about your TV

You can operate your TV by using the buttons on the front panel or the remote control. The terminals on the

back panel provide all the connections you will need to connect other equipment to your TV.

Front Controls

Remote Sensing Window

Power indicator

Channel up / cursor up

Volume up / cursor right

Volume down / cursor left

Source select

Menu button

Channel down / cursor down

- 3 -

Power button (standby)

Power Switch(ON/OFF)

VOL

SOURCE

CART2

SCA

RT1

INPUT

OUTPUT

VIDEO AUDIO/L AUDIO/R

Note: The above figures are for reference only, please refer to the actual units to determine their appearance.

- 4 -

Preparation for Using your new TV

131

141

151

161

171

191

INPUT

AV input

AV output

RS232C input

AC Power Socket

Antenna input

VGA input

Earphone output

DVI input

COMPONENT AUDIO input

COMPONENT VIDEO input

S-VIDEO input

Scart2 connector

Scart1 connector

PC AUDIO input

[VIDEO IN/OUT(CANEL+) RGB IN] [VIDEO IN/OUT Y/C/N]

COMPONENT VIDEO

INPUT

S-VIDEO

INPUT

EARPHONE

OUTPUT

EARPHONE

OUTPUT

AUDIO INPUT

[COMPONENT]

AUDIO INPUT

[VGA DV]

SCA

ART1

INPUT

OUTPUT

VIDEO AUDIO/L AUDIO/R

[VIDEO IN/OUT(CANEL+) RGB IN] [VIDEO IN/OUT Y/C/N]

Preparation for Using your new TV

Caution: Do not plug the TV in until you have finished connecting all of your equipment.

Connecting your TV

To enjoy its multimedia features, you can connect your to A/V equipments such as VCR, DVD, STB, Satellite

receiver, Camcorder, Audio amplifier etc., and select signal sources using your remote control.

Connect the

devices as shown below.

Connecting to A/V equipments

- 5-

HDTV STB

VCD, DVD

LANGUAGE ENGLISH

Notes:The input signal of : 480P/60Hz,480I/60Hz,576P/50Hz,

576I/50Hz, 720P/60Hz,1080I/50Hz,

YPBPR /YCBCR mode can be the following format

720P/50Hz, 1080I/60Hz

COMPONENT

ANT 75

COMPONENT VIDEO

INPUT

S-VIDEO

INPUT

EARPHONE

OUTPUT

EARPHONE

OUTPUT

AUDIO INPUT

[COMPONENT]

AUDIO INPUT

[VGA DV]

ANT

You can use your TV as a monitor/speakers for connecting through its 15pin standard RGB

interface and PC audio interface.

your computer by

Connect the devices as shown below.

Connecting to A Computer

Preparation for Using your new TV

To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor antenna

(not supplied). Perfect picture quality requires a good signal and generally means that an outdoor antenna

must be used. The exact type and location of the antenna will depend on your particular area. Consult your

local dealer or service personnel for best advice. If you are a subscriber of your local CATV net, the outdoor

or indoor antenna is not needed. Connect the equipments as the following figure.

Connecting to an antenna

- 6-

PC/NB

To VGA

To speaker

RGB line

Audio line

ANTENNA SOCKET

ANT 75

Loosen the screw

Insert the feeder in

Tighten the screw

Plug(not supplied)

Adaptor (not supplied)

The signal comes from:

An outdoor antenna

An indoor antenna

CATV net

TWIN-LEAD FEEDER(300 W )

COAXIAL CABLE (75W )

NOTE: PC mode support resolution: VGA, SVGA, XGA, SXGA.

COMPONENT VIDEO

INPUT

S-VIDEO

INPUT

EARPHONE

OUTPUT

EARPHONE

OUTPUT

AUDIO INPUT

[COMPONENT]

AUDIO INPUT

[VGA DV]

ANT

Preparing the remote control for use

Installing the remote control batteries

1. Open the battery cover on the back of the remote control.

2. Install two AAA size(1.5V) batteries. Match the + and - signs on the batteries to the signs on the battery

compartment.

3. Close the battery cover.

Note:

1.Dispose of your batteries in a designated disposal area. Do not throw batteries into fire.

2.Do not mix battery types or combine used batteries with new ones.

3.Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment.

4.If you do not intend to use the remote control for a long time, remove the batteries.

5.The effective range of remote control is suggested in the figure.

Using the remote control

- 7-

3m 3m

Learning about the remote control

Using the remote control

- 8-

HYDFSR-EP209C1

Return to previous channel

selectionchannel Direct

Channel Number

Select picture mode

Power on/off

Volume down

Make the volume to zero

Channel down

Freeze picture

Display current input

Not used

Component mode

S-VIDEO mode

VGA/DVI mode

Volume up

Call up the main menu

Channel up

Select sound mode

Ajust zoom ration

ZoomZoom

Adjust the sleep time

Time

Mono/Stereo

Time

S-Video

YCbCr

YPbPr

Video

ZoomZoom

Text

Still

FAST TEXT buttons

TEXTTEXT

Teletext mode

Switch to TV,SCART1,

AVand SCART2 mode

VOL

Source

Using the TV features

Basic Operations

Multimedia - TV receiver, Video monitor and PC display, all in one.

Wider viewing angle, 16:9 display - 176 viewing angle at typical value

Digital display device - truthfully reproducing the images, without distortion or blurring, irrespective

of magnetic or geomagnetic effect.

200 channels Memory

Sleep timer

Teletext with 252 pages memory

NICAM/A2 Stereo

Dual SCART interface

Multi-language OSD

Understanding the TV features

1) Connect the TV to power outlet and turn on the power switch, the power

indicator will be red

2) Press the Power button on the front control or on the

the TV on standby. Press the power switch to turn off power.

3) If you decide to shut off the TV for a long time, it is recommended

that you unplug the power from the outlet.

and then turn blue. Several seconds later, TV picture

will display on the screen.

remote control to make

Power ON/OFF

- 9-

POWER BUTTON

(STANDBY)

Signal source selection

Select channels by [CH+/CH-]

You can also use [CH+ / CH-] to select channels. ndicates channel number increase; indicates channel

number decrease.

[CH+] i [CH-]

NOTE: 1).When you press the [YC C ] button, will display ABORT KEY in screen

2).

Press [CH+/CH- ] button to select TV input; press the [VIDEO] button to select TV ,scart1, scart2

and AV input in turn; press the [S-VIDEO] button to select S-VIDEO input ;press the [ YPBPR]

button to select YPBPR input; press the [PC] button to select VGA or DVI input.

BR BR

In Video channel Of scart1 ,if you want quit from scart1 , you can press the [VIDEO] button to select

others video signal, or convert other signal source, for example, to press the [YP P ] button to select YP P input.

POWER

INDICATOR

By pressing [Display] button will you to view current source information.

Display channel number

Press [Still] button to snapshot the present viewing picture, and press again to return to normal.

Use [Still] button

By pressing [Zoom] button you will able to change the screen aspect ratio between 16:9 or 4:3.

Use [ Zoom ] button

By pressing [Mute] button will allow you to mute the sound temporary, press again to resume sound.

Mute function

By pressing [ Recall ] button will allow you to toggle between current and previous channel.

Use [Recall] button

By pressing [ P. mode ] button will allows you to select between three difference

picture modes preset setting(SOFT, BRIGHT, NORMAL) and a USER setting that

you can adjust to your desired.

Select picture modes

By pressing [ S. Mode ] button will allows you to select between three difference

sound modes preset setting(MUSIC, SPEECH, NORMAL) and a USER setting that

you can adjust to you desired.

Select sound modes

Adjust Volume

When menu OSD is not on TV screen, press to adjust the volume.[VOL+ or VOL-]

To select a channel : Press the channel numbers in series to select channel directly.

Press the button 1, and 1_ _ will display on the top right corner of the screen,

then press the button 2, 12_ will display, press the button zero, you can enjoy the program of channel 120.

For example, to select channel 120,

Select channels by numbers

NORMAL

USER

SOFT

BRIGHT

SPEECH

NORMAL

MUSIC

USER

Using the TV features

- 10-

NOTE:

1) When you changing the channel, the sound mode will be displayed below the channel number. There are 3

sound states in this TV. If the sound is mono, the graphics is , If the sound is stereo, the graphics is

If the sound is NICAM dual I/II, the graphics is .

Which indicate preset of picture system and sound system.

When you changing the channel, the OSD will display current sound mode. You can change to difference sound

mode by pressing the I/II button to change to Stereo, NICAM or Dual sound.

3) When you select the 0 channel, the video source in SCART1 will be selected. And then you press the VIDEO

button ,It will return TV source.

There are two symbol at right of the sound state graphics,

Using the TV features

11-

Using the CHANNEL menu

1) Press MENU button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item CHANNEL.

3) Press [CH+ or CH-] button to select AUTO SEARCH.

4) Press [ VOL+] button to start auto searching.

AUTO-SEARCH

You can set sound system.

1) Press [MENU] button to enter main menu.

2) Press button to select the item CHANNEL.

3) Press button to select sound system, and press

[VOL+] button to enter sound system.

4) Press button, AUTO, D/K, B/G, L/L` is selected in turn.

[VOL+ or VOL-]

[VOL+ ] I,

[CH+ or CH-]

Sound system

SKIP

1) Press [MENU] button to enter main menu.

2) Press button to select the item CHANNEL.

3) Press button to select PROGRAM.

4) Press button to select the channel.

[VOL+ or VOL-]

[CH+ or CH-]

PROGRAM

1) Press [MENU] button to enter main menu.

2) Press button to select the item CHANNEL.

3) Press button to select SKIP.

4) Press button to skip or un-skip the current channel.

[VOL+ or VOL-]

[VOL+]

[CH+ or CH-]

1) Press MENU button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item CHANNEL.

3) Press [CH+ or CH-] button to select MANUAL SEARCH.

4) Press [ VOL+ or VOL-] button to start MANUAL searching.

MANUAL-SEARCH

1) Press MENU button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item CHANNEL.

3) Press [CH+ or CH-] button to select FINE TUNE.

4) Press [ VOL+ or VOL-] button to start FINE searching.

FINE TUNE

1) Press MENU button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item CHANNEL.

3) Press [CH+ or CH-] button to select CHANNEL EDIT.

4) Press [ VOL+] button to start CHANNEL EDIT.

5) You can swap or copy a program by using the SWAP or COPY function from the CHANNEL EDIT menu.

CHANNEL EDIT

CHANNEL

PROGRAM

SOUND SYSTEM

AUTO SEARCH

MANUAL SEARCH

SKIP

FINE TUNE

CHANNEL EDIT

-12 -

Using the TV features

Note: 1) When main picture is AV/TV/ SCART/S-VIDEO. pip picture is HDTV(YPBPR /PC.

2) When main picture is /PC. pip picture is AV/TV/ SCART/S-VIDEO.

)

HDTV(YPB PR)

Using the PICTURE menu

PROGRAM

PICTURE PARAMETERS

BRIGHTNESS

CONTRAST

SATURATION

COLOUR TEMP

SHARPNESS

FLESHTONE

NOISE REDUCE

1) Press [MENU] button to enter main menu.

2) Press button to select the item PICTURE

PARAMETERS.

3) Press button to select the item you want to adjust.

4) Press button to adjust the level.

5) The data adjusted is memorised automatically in the user mode.

NOTE : The COLOUR TEMP is only to be adjusted in the PC mode.

[VOL+ or VOL-]

[CH+ or CH-]

Adjust picture settings

Using the AUDIO SETTING menu

Adjust audio settings

1) Press [MENU] button to enter main menu.

2) Press button to select the item AUDIO SETTING.

3) Press button to select the item you want to adjust.

4) Press button to adjust the level.

5) Adjusted data will automatically stored in user mode only..

[VOL+ or VOL-]

[CH+ or CH-]

BASS

TREBLE

BALANCE

AUDIO SETTING

1) Press MENU button to enter main menu, press

select PICTURE IN PICTURE.

2) Press

button to enter the PIP SIZE, then p

[VOL+ or VOL-]

button to select PIP SIZE, and

press [ ress

button to select OFF/PIP/PBP.

3) Press button to select PIP SOURCE, and

press button to enter PIP SOURCE, then press

button to select the PIP SOURCE.

4) Press button to select PIP POSITION, PIP

BRIGHTNESS or PIP CONTRAST, press [VOL+ or VOL-] button to adjust the value.

[CH+ or CH-]

VOL+]

[CH+ or CH-]

[ VOL+]

[CH+ or CH-]

Using the PIP menu

PICTURE IN PICTURE

PIP POSITION

PIP SIZE

PIP SOURCE

PIP BRIGHTNESS

PIP CONTRAST

-13 -

Using the TV features

Using the MENU LOCK SETTINGS menu

SET PASSWORD

Password is a four-digit number. The preset password is 1111.

If you want to change the password, you must enter the current password.

1) Press button to select SET PASSWORD, enter the

current password.

[CH+ or CH-]

CANCEL

MPAA TATTING/TV RATTING

CHANGE PASSWORD

1) Press button to select SET PASSWORD,

and press to enter SET PASSWORD.

2) Input the new password , The new password has now stored..

[CH+ or CH-]

[ VOL+]

Enter the Menu Lock Password:

______

CANCEL

Setting Password

______

LOCK MENU

MENU LOCK SETTINGS

LOCK MENU

SET PASSWORD

1) Press [MENU] button to enter main menu.

2) Press button to select the item MENU

LOCK SETTINGS.

3) Press button to select LOCK MENU.

4) Press .

[VOL+ or VOL-]

[VOL+ ] button to enable LOCK MENU

[CH+ or CH-]

Please Enter Password You Want.

Using the TV features

Using the GENERAL SETTINGS menu

-14 -

CHANGE PASSWORD

LANGUAGE ENGLISH

GENERAL SETTINGS

OSD POSITION

COLOUR SYSTEM

OSD LANGUAGE

BLUE SCREEN

TRANSPARENCY

SLEEP TIMER

DEINTERLACER

1) Press MENU button toenter main menu.

2) Press [VOL+ or VOL-] button to select the item GENERAL SETTINGS.

3) Press [CH+ or CH-] button to select BLUE SCREEN.

4) Press [ VOL+] button to enable BLUE SCREEN .

NOTE : When you enable the blue screen, this will active the Blue screen if there is no signal input.

BLUE SCREEN

COLOUR SYSTEM

1) Press [MENU] button to enter main menu.

2) Press button to select the item GENERAL

SETTINGS.

3) Press button to select OSD POSITION.

4) Press button to

adjust OSD POSITION.

[VOL+ or VOL-]

[VOL+ or VOL- or CH+ or CH-]

[CH+ or CH-]

OSD POSITION

1) Press MENU button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item GENERAL SETTINGS

3) Press [CH+ or CH-] button to select SLEEP TIMER.

4) Press [ VOL+-] button to adjust SLEEP TIMER.

SLEEP TIMER

1) Press MENU button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item GENERAL SETTINGS.

3) Press [CH+ or CH-] button to select TRANSPARENCY.

4) Press [ VOL+ or VOL-] button to adjust the intensity of transparency.

TRANSPARENCY

1) Press MENU button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item GENERAL SETTINGS.

3) Press [CH+ or CH-] button to select OSD LANGUAGE, and press [VOL+]]button

to enter OSD LANGUAGE.

4) Press [ VOL+] button to select the language what you want use.

OSD LANGUAGE

You can set colour system.

1) Press [MENU] button to enter main menu.

2) Press button to select the item GENARAL SETTING

3) Press button to select COLOUR SYSTEM .and press

[VOL+] button to enter COLOUR SYSTEM

4) Press the button to select between: AUTO, PAL, SECAM.

[VOL+ or VOL-]

[VOL+ ]

[CH+ or CH-]

-15-

Using the TV features

Using the GENERAL SETTINGS menu

1) Press MENU button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item GENERAL SETTINGS.

3) Press [CH+ or CH-] button to select DEINTERLACER.

4) Press [ VOL+ ] button to enter the DEINTERLACER.

5) Press [ CH+ or CH-] button to select the feature.

MADI: Motion Adaptive De-Interlacing, by selecting the function, the quality of motion picture will be improved. As a

result, the areas that are not moving in a image will be fully static(flicker free) and the objects that are moving

will have a smooth edge.

LADI: Low Angle Diagonal Interpolation, by selecting the function, a smooth edge on moving objects with diagonal

pattern will be obtained.

DEINTERLACER

Using the PC menu

1) Press MENU button to enter main menu.

2) Press [VOL+ or VOL-] button to select the item

PC PARAMETERS.

3) Press [CH+ or CH-] button to select the item you

want to adjust.

NOTE: 1) PC menu is used only on VGA and

YPBPR mode.

2) The item AUTO is used to adjust position

of picture automatic and it is effective

The item

The item CLOCK and PHASE

can adjust

only on

VGA mode. AUTO COLOUR

is used to adjust quality of picture manually

when signal is not good sometimes. The

item POSITION is used to adjust the position

of picture.

quality of picture minutely, and they

are used less.

LANGUAGE ENGLISH

AUTO

CLOCK

AUTO COLOUR

PHASE

POSITION

PC PARAMETERS

Teletext Operations

-16-

Using the TV features

Select the channel that is broadcasting the desired Teletext program.

Press [ TEXT ] button and alternate between Teletext mode and normal mode.

Note: All the operations below should be under the Teletext mode except TIME operation.

SELECTING TELETEXT MODE

PAGE SELECTION

You can directly input your desired page number by pressing [0~9] buttons.

You can sequentially read pages by pressing [ or

] button.

HOLD

Some Teletext information is contained on more than one page, the pages automatically changing

after a given reading time.

Press [ S-Video ] button to stop the page changing.

Press [ S-Video ] button again to allow the page to change.

Some Teletext pages contain quiz or questions with hidden answers.

Press [ ] button to see the answers.

Press [ ] button again to hide the answers.

REVEAL

CANCEL

When a page is selected in Teletext mode it may take some time before it becomes available.

Press [ YPbPr ] button to switch to the TV mode.

When required page is found, the page number will appear at the top of the TV picture,

press [ YPbPr ] button to return to the selected Teletext page.

Note: You can change TV program while in this mode.

SUB CODE

Some Teletext pages contain sub page that require you to input the sub code.

Press [ P. Mode ] button until ***|**** is displayed, and enter last four-digit sub code for the sub page you need.

MIX

You can mix Teletext with TV pictures, which means transparent teletext.

Press [Video] to mix, and press [ Video ] again to cancel the mixed effect.

ZOOM (Top/Bottom/Full)

Press the [ PC ] button to display the TOP HALF of the page.

Press again to display the BOTTOM HALF of the page.

Press again to return to a FULL PAGE display.

Note: Changing pages reverts to a FULL PAGE display.

TIME

Time information is contained in the teletext broadcast.

In Teletext mode, press [Time] to display the time.

FAST TEXT

The RED, GREEN, YELLOW & CYAN buttons are used for quick access to colour coded pages

transmitted by FAST TEXT broadcast.

INDEX

Teletext index page guides you quickly to your desired page.

Press [ S. Mode ] button to enter index page.

Teletext Operations

-17-

Using the TV features

Troubleshooting

Before calling a service technician, please check the following table for a possible cause of the problem and

some solutions.

Symptoms

Possible Solutions

TV will not turn on

No picture, no sound

No sound, picture OK

Poor sound, picture OK

Poor picture, sound OK

Unable to select a certain channel

Poor colour or no colour

The remote control does not operate

Make sure the power cord is plugged in, then press [Power].

The remote control batteries may be dead. Replace the batteries.

Check if you have set the off timer.

Check the antenna/cable connections.

Press [Display] to see if you have select the right signal source.

The sound may be muted. Press on the remote control or .

The station may have broadcast difficulties. Try another channel.

[ >]

The station may have broadcast difficulties. Try another channel

Check the antenna connections.

The station may have broadcast difficulties. Try another channel.

Adjust the picture from the menu.

The channel may be skipped. See SKIP on page 13.

The station may have broadcast difficulties. Try another channel.

Adjust the HUE and COLOUR in the menu.

There may be an obstruction between the remote control and the

remote control sensor.

The batteries may be installed with a wrong polarity.

The remote control batteries may be dead. Replace the batteries.

Appendix

Check the speakers cable connections.

Disorder display at power on

This may be caused by too short interval between power off and on.

Unplug the power and restart.

Check if you have entered Teletext mode. Press [ Text ] to quit.

-18 -

Customer important notice: When the TV can not be operationed in some special situation,please unplug the power and restart.

Page is loading ...

Hisense LCD3204EU User manual

Brand: Hisense

Model: LCD3204EU

Category: LCD TVs

Type: User manual

This manual is also suitable for

LCD3204

Download PDF

report

Hisense LCD3204EU User manual

This manual is also suitable for

Hisense LCD3204EU User manual

Related papers

Other documents