Etymotic Research ety8 User manual

Brand: Etymotic Research

Model: ety8

Type: User manual

FRANÇAISENGLISH

ety8

™

Bluetooth

High-Fidelity Noise-Isolating Earphones

User Guide

Compatible with phones and devices supporting

Bluetooth specification 1.1 and higher.

Supporting A2DP and AVRCP profiles for stereo listening.

Contents:

SAFE LISTENING . . . . . . . . . . . . . . . . . . . . . . . . 2

IDENTIFICATION . . . . . . . . . . . . . . . . . . . . . . . .3

CHARGING / BATTERY LIFE . . . . . . . . . . . . . . .4

SELECTING AN EARTIP . . . . . . . . . . . . . . . . . . .5

PAIRING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

POWER ON/OFF AND VOLUME . . . . . . . . . . . .7

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . .8-9

EARPHONE FILTERS . . . . . . . . . . . . . . . . . . . .10

PROPER CARE . . . . . . . . . . . . . . . . . . . . . . . . .11

FCC AND OTHER INFORMATION . . . . . . . . . .12

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . .13

WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . .14

91678 YDS ER088105 Proof 11/10/06 4:16 PM Page 1

ENGLISH

Ety8 Earphones sold in Europe comply with European law, which requires that the maximum

output of a portable player be limited to 100 dB (A scale). The maximum output of ety8

earphones sold outside Europe is 110 dB. Which is safer? Neither one. Research indicates that

nearly everyone chooses a safe listening level unless background noise forces them to turn up

the volume. The mission of Etymotic Research is to preserve hearing. Ety8 earphones block out

most background noise, allowing you to listen at lower, safer levels.

To increase output in European ety8 earphones:

1. Connect to the device.

2. Press/release PLAY/PAUSE on R earphone.

3. Within 2 seconds:

(1) Press/hold Volume UP (2) Press/release NEXT/Fast-Forward.

To decrease output:

1. Connect to the device.

2. Press/release the PLAY/PAUSE on R earphone.

3. Within 2 seconds:

(1) Press/hold Volume DOWN (2) Press/release NEXT/Fast-Forward.

• Consult a medical professional if you have excessive earwax, or if you have

discomfort after prolonged use of the eartips.

• Do not use noise-isolating insert earphones while driving, operating machinery,

bicycling or jogging, because you may not be alerted to potential danger.

SAFE LISTENING

Caution

91678 YDS ER088105 Proof 11/10/06 4:16 PM Page 2

ENGLISH

IDENTIFICATION

1. Eartip

2. Earphone Identifier

3. USB Port on R Earphone

4. LED

5. Power, Play/Pause Button

6. Volume Control Button

7. Previous/Rewind Button

8. Next/Fast-forward Button

91678 YDS ER088105 Proof 11/10/06 4:16 PM Page 3

ENGLISH

CHARGING / BATTERY LIFE

Note: Fully charge before first use (approximately 2-3 hours).

Charging: LED yellow

Charging complete: LED off

• Charge the earphones from a computer via the USB cable provided.

Charging

1. Plug USB cable into the USB port on the R earphone.

2. Connect to a computer.

Battery life: Up to 10 hours

• Low battery warning: LED blinks green when there is

one hour left.

91678 YDS ER088105 Proof 11/10/06 4:16 PM Page 4

ENGLISH

Select an eartip

When properly sealed, the earphones are

self-supporting in the ear canal. Sound

quality and noise isolation depend on a

good eartip seal.

Insertion

• Pull ear up and back.

• Twist earphone while inserting until outside

noise is sealed off.

• Position (rotate) earphones in the ear for the

best fit.

• Foam eartips: Roll the foam down, then insert

and hold in the ear for 5 seconds.

Removal

• To avoid discomfort, use a slow twisting

motion to gradually break the seal.

• Open the jaw slightly to equalize pressure, because

suction can occur when the eartip is removed.

SELECTING AN EARTIP

Stem can be cut

to shorter length

91678 YDS ER088105 Proof 11/10/06 4:16 PM Page 5

ENGLISH

Bluetooth transmitter pairing varies. When pairing ety8 earphones, follow the

instructions for the device being paired with the earphones.

Instructions for ety8 earphones:

• Make sure the earphones are OFF.

• Press/hold the POWER button on the R earphone for about 10 seconds.

• The LED on R earphone will rapidly flash green when ready for pairing.

• Once the earphones are in fast blink mode, you have five minutes to pair with the

Bluetooth device.

• If a passkey is requested, enter “0000”

PAIRING

91678 YDS ER088105 Proof 11/10/06 4:16 PM Page 6

ENGLISH

Power On

• Press/hold POWER button on the R earphone

until LED is on (1-2 seconds).

Note: The POWER button also functions as a

PLAY/PAUSE control.

Power Off

Press the POWER button on R earphone for

3 seconds until the green LED goes off.

Auto Shut Off

If no music is playing, the earphones will turn off after five minutes.

Volume

Volume adjustments can only be

made using the R earphone controls.

POWER ON/OFF and VOLUME

Power

Play/Pause

LED

Volume Up

Volume Down

LED

91678 YDS ER088105 Proof 11/10/06 4:16 PM Page 7

ENGLISH

Problem: Music does not play through the earphones.

Solution: Check all connections.

• Make sure the green LED is solidly illuminated on both earphones and adapter.

Problem: The music breaks up.

Solution: Reduce distance between the earphone and music player.

Problem: The earphones seem to lack bass.

Solution: Check eartip seal.

A good eartip seal is critical. For the fullest frequency response:

• try inserting the eartips slightly deeper to obtain a better seal; or

• try other flanged or foam eartips for a better seal.

Problem: One earphone sounds weak.

Solution: Weak sound is usually caused by a blocked filter.

• Locate the filter changing tool.

• Remove the filter. See section 8 “Earphone filters.”

• Listen to the sound output to determine if the problem is solved.

• Replace the old filter with a new one. See section 8 “Earphone filters.”

TROUBLESHOOTING

91678 YDS ER088105 Proof 11/10/06 4:16 PM Page 8

ENGLISH

Problem: The earphones become unpaired.

Solution: Re-pair the earphones:

• See section 5 “Pairing.”

Problem: The earphones are uncomfortable.

Solution 1: Change eartip size and/or change earphone position.

Solution 2: Rotate earphones in ears for best fit and comfort.

Solution 3: Switch L and R earphones to opposite ears.

To maintain channel integrity, reverse the channels by the following key sequence:

• Connect to the device.

• Press/release PLAY/PAUSE on R earphone.

• Within 2 seconds:

(1) Press/hold PREVIOUS/rewind

(2) Press/release NEXT/fast-forward

Note: Channels can be returned to the previous position by repeating the key

sequence.

Problem: Earphones connect, then quickly shut off.

Solution: Charge the earphones.

91678 YDS ER088105 Proof 11/10/06 4:16 PM Page 9

ENGLISH

Ety8 Earphones have special filters to smooth the frequency response and to

prevent earwax from entering the earphones. Change filters if volume decreases or

the sound quality declines.

Removal

Replacement

EARPHONE FILTERS

1. Remove Eartip.

2. Insert tool into the

filter.

3. Remove filter.

1. Insert a new filter and

press gently against a

hard surface to secure

it in place.

2. Attach eartip.

91678 YDS ER088105 Proof 11/10/06 4:16 PM Page 10

ENGLISH

• Avoid extreme temperatures, strong impact and water.

• Perspiration can cause the earphones to temporarily stop working, but normal

operation usually returns after the earphones dry out.

• Always leave an eartip on the earphone for shock protection.

• Replace foam eartips regularly.

Cleaning

Flanged eartips:

Clean regularly. Simply wipe off the eartips.

If water and mild soap are used, dry the eartips before reattaching.

Foam eartips:

Discard dirty eartips and replace with new ones.

PROPER CARE

91678 YDS ER088105 Proof 11/10/06 4:16 PM Page 11

ENGLISH

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. Some equipment operates at frequencies that may cause interference to nearby TVs and VCRs; to

minimize or prevent such interference, the system base should not be placed near or on top of a TV, PC monitor,

or VCR; and, if interference is experienced, moving the desk station farther away from the TV or VCR will often

reduce or eliminate the interference. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the system off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

1. Increase the separation between the equipment and receiver.

2. Consult the dealer or an experienced radio TV technician for help.

FCC Health and Safety Information

Your device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits

for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S.

Government. The FCC has established criteria for the amount of radio frequency energy various products may

produce depending on their intended usage. This product has been evaluated and found to comply with the

FCC’s exposure criteria. For body worn operation, the FCC RF exposure guidelines were also met when used

with the accessories supplied or designed for this product. Use of other accessories may not ensure compliance

with FCC RF exposure guidelines and should be avoided. Caution: Any changes or modifications not expressly

approved by the party responsible for compliance could void the user’s authority to operate this device. This

device must not be colocated with other transmitters.

FCC AND OTHER INFORMATION

91678 YDS ER088105 Proof 11/10/06 4:16 PM Page 12

ENGLISH

Transducer Type: Balanced armature

Frequency Response Accuracy: 50 Hz -6 kHz

± 3 dB; 20 Hz -15 kHz ± 6 dB

Noise Isolation: 35 dB with flanged eartip, deeply inserted

40 dB with foam eartip, deeply inserted

Max Output: 110 dB SPL

Weight: < 14 gms each earphone

Battery Life: 7 to 10 hours depending on the connected BT device

Charging Time: 1 hour to 80% charge. 2-3 hours from empty battery to full charge

Range: >10 meters in free space

Body absorption: The body blocks transmission. Use the music player on the same

side of the body as the R earphone.

Volume Control Range: 40 dB

Total Harmonic Distortion: < 4% at 1 kHz at a nominal output of 100 dB SPL

Antenna: Internal

SPECIFICATIONS

91678 YDS ER088105 Proof 11/10/06 4:16 PM Page 13

ENGLISH

2-year warranty period from the date of original purchase.

Etymotic Research, Inc. automatically warrants the following products against

defects in material or workmanship from the date of original purchase from an

authorized Etymotic distributor or reseller.

Etymotic will repair or replace the defective product at its option if returned

within the warranty period to our service facility. This warranty is in lieu of all

other warranties, expressed or implied, including, but not limited to, any implied

warranty of merchantability or fitness for a particular purpose.

WARRANTY

91678 YDS ER088105 Proof 11/10/06 4:16 PM Page 14

FRANÇAIS

ety8

™

Écouteurs haute-fidélité avec suppression

du bruit Bluetooth

Guide d'utilisation

Compatibles avec les téléphones et les appareils

conformes à la spécification Bluetooth 1.1 ou supérieure.

Compatibles avec les profils A2DP et AVRCP pour

l'écoute en stéréo.

Contenu:

ÉCOUTE SÉCURITAIRE . . . . . . . . . . . . . . . . . . . . . . . .16

IDENTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

CHARGEMENT / DURÉEE DE VIE DE LA PILE . . . . .18

SÉLECTION D'UN EMBOUT . . . . . . . . . . . . . . . . . . . .19

COUPLAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

MISE EN MARCHE ET LE RÉGLAGE DE VOLUME . . .21

DÉPANNAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . .22-23

FILTRES D'ÉCOUTEURS . . . . . . . . . . . . . . . . . . . . . . .24

ENTRETIEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

FCC ET D'AUTRES INFORMATIONS . . . . . . . . . . . . .26

SPÉCIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

GARANTIE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

91678 YDS ER088105 Proof 11/10/06 4:16 PM Page 15

FRANÇAIS

Les écouteurs Ety8 vendus en Europe sont conformes à la loi européenne qui stipule que la puissance

sonore maximale de sortie d'un lecteur portatif doit être limitée à 100 dB (échelle A). La puissance sonore

maximale de sortie des écouteurs ety8 vendus à l'extérieur de l'Europe est de 110 dB. Lequel est plus

sécuritaire? Ni l'un ni l'autre. La recherche indique que presque chaque personne choisit un niveau d'é-

coute sécuritaire à moins d'être forcée à augmenter le volume à cause du bruit de fond. La mission

d'Etymotic Research est de préserver l'acuité auditive. Les écouteurs Ety8 bloquent la plupart des bruits de

fond ce qui permet une écoute à des niveaux de volume moins élevés et plus sécuritaires.

Pour augmenter la puissance de sortie des écouteurs ety8 européens:

1. Connexion à l'appareil.

2. Appuyez et relâchez le bouton LECTURE/PAUSE sur l'écouteur R

3. Dans l'intervalle de deux secondes: (1) Appuyez et maintenez enfoncé le bouton Augmenter le volume (2)

Appuyez et relâchez le bouton SUIVANT/Avance rapide

Pour diminuer la puissance:

1. Connectez à l'appareil.

2. Appuyez et relâchez le bouton LECTURE/PAUSE sur l'écouteur R

3. Dans l'intervalle de deux secondes: (1) Appuyez et maintenez enfoncé le bouton Diminuer LE VOLUME (2)

Appuyez et relâchez le bouton SUIVANT/Avance rapide

• Consultez un médecin si vous avez trop de cérumen, ou si vous ressentez une gêne

après un usage prolongé des embouts.

• N'utilisez pas des écouteurs à embouts avec suppression de bruit quand vous conduisez,

quand vous utilisez une machine, quand vous conduisez une bicyclette ou faites du jogging

parce que vous pourriez ne pas être alertés

au danger potentiel.

ÉCOUTE SÉCURITAIRE

Attention

91678 YDS ER088105 Proof 11/10/06 4:16 PM Page 16

FRANÇAIS

IDENTIFICATION

1. Embout

2. Identificateur d'embout

3. Port USB sur l'écouteur R

4. voyant DEL

5. Bouton Marche/Arrêt, bouton

Lecture/Pause

6. Bouton de Réglage du volume

7. Bouton Précédent/Retour rapide

8. Bouton Suivant Avance rapide

91678 YDS ER088105 Proof 11/10/06 4:16 PM Page 17

FRANÇAIS

CHARGEMENT / DURÉEE DE VIE DE LA PILE

Notez: Chargez complètement avant la première

utilisation (environ 2-3 heures).

Chargement: Voyant DEL jaune

Chargement complété: Voyant DEL éteint

• Chargez les écouteurs en utilisant l'ordinateur à l'aide du câble USB fourni.

Chargement

1. Connectez le câble USB dans le port USB sur l'écouteur R

2. Connectez à l'ordinateur.

Durée de vie de la pile: Jusqu'à 10 heures

• Avertissement des piles faibles: Le voyant DEL clignote

en vert quand il ne reste qu'une heure.

91678 YDS ER088105 Proof 11/10/06 4:16 PM Page 18

FRANÇAIS

Sélectionnez un embout

S'ils sont insérés de façon à être étanches, les

écouteurs tiennent en place dans le conduit auditif.

La qualité du son et la filtration du bruit dépendent

de la façon d'insérer l'embout.

Insertion

• Tirez l'oreille vers le haut et en arrière.

• Tournez l'écouteur quand vous l'insérez jusqu'à

isoler le bruit extérieur.

• Placez (tournez) les écouteurs dans l'oreille pour trouver

la meilleure position.

• Embouts en mousse: Roulez la mousse, insérez-la

et tenez dans l'oreille pendant 5 secondes.

Enlèvement

• Pour éviter le sensation de gêne, utilisez un mouvement

lent et tournant pour briser l'étanchéité graduellement.

• Ouvrez légèrement la mâchoire pour égaliser la pression,

parce qu'il peut y avoir de la succion quand l'embout est retiré.

SÉLECTION D'UN EMBOUT

Stem can be cut

to shorter length

91678 YDS ER088105 Proof 11/10/06 4:16 PM Page 19

FRANÇAIS

Le couplage des émetteurs Bluetooth varie. Quand vous couplez des écouteurs ety8, suivez

les instructions pour l'appareil que vous voulez coupler avec ces écouteurs.

Instructions pour les écouteurs ety8:

• Assurez-vous que les écouteurs sont éteints.

• Appuyez et maintenez enfoncé le bouton MARCHE/ARRÊT sur l'écouteur R pendant envi

ron 10 secondes.

• Le voyant DEL sur l'écouteur R clignotera rapidement en vert quand il est prêt pour le

couplage.

• Une fois les écouteurs en mode de clignotement rapide, vous avez cinq minutes pour les

coupler avec un appareil Bluetooth.

• Si une clé de passe est requise, entrez "0000"

COUPLAGE

91678 YDS ER088105 Proof 11/10/06 4:16 PM Page 20

Page is loading ...

Etymotic Research ety8 User manual

Brand: Etymotic Research

Model: ety8

Type: User manual

Download PDF

report

in other languages

français: Etymotic Research ety8 Manuel utilisateur

Etymotic Research ety8 User manual

Etymotic Research ety8 User manual

in other languages

Related papers

Other documents