Sytech SY-425HD Owner's manual

DVD/DVBT-HD RECORDER

(High Definition)

MODEL: SY-425HD

INSTRUCTIONS MANUAL

WELCOME!

Dear Customer,

Welcome to Sytech! Thank you for purchasing the DVD/DVBT-HD

RECORDER HIGH DEFINITION SY-425HD.

Please read this manual carefully before operating your product and pay

close attention to the precautions which are mentioned below. Store this

user manual in a safe place for future reference.

We are sure that this new DVD/DVBT-HD RECORDER will satisfy your needs.

Important Safety Instructions

Table of Contents

Front and RearPanel ............................................................................... 1

Remote Control.... ................................................................................... 2

Connecting to a Television.........................................................................4

System Setup.......................................................................................... 5

Troubleshooting......................................................................................19

TechnicalSpecifications...........................................................................20

First Time Installation.............................................................................. 8

Front and Rear Panel

1. Front panel

1

2. Rear panel

1. DISC TRAY

2. RECEIVER WINDOW

3. PLAY/PAUSE

4. STOP

5. OPEN/CLOSE

6. POWER

7. USB

1 2 3 4 5 6

1. RF IN

2. RF LOOP THROUGH

3. HDMI

4. COAXIAL

5. RIGHT OUTPUT

6. TV SCART

7. CVBS OUTPUT

8. LEFT OUTPUT

7 8

Remote Control

2

POWER: Switch the receiver in and out of standby model.

ANGLE: Select different angle what you want.(DVD)/FAV:

Display your favorite channels list. (DVB)

SUBTITLE: Display subtitle options.

DISPLAY: Show the information (time,title, chapter) of the disc

playing(DVD)/INFO: Display program info(DVB).

PROG: Arrange program.(DVD)/TTX: Switch on Teletext, if

current channel has this option, and use EXIT key to quit

Teletext.(DVB)

CLEAR: Clear function.(DVD)/RECALL: Go back to the previous

viewed channel. (DVB)

USB: Switch to USB playback mode.

<0> - <9>: Numeric keys.

SETUP: Setup menu.

Press to move the cursor/CHANNEL+/CHANNEL-.

ENTER: To confirm current setting, or display all programs in

no-menu mode.

EXIT: Use this key to quit current menu.(DVB)/RETURN:

Return to disc menu playback.(DVD)

TITLE: Enter to title playback.(DVD)/PAGE UP:To navigate

inside the menus.(DVB)

MENU: Press it to the disc menu playback(DVD)/PAGE DN:

To navigate inside the menus.(DVB)

VOL-/VOL+: To increase/decrease volume.

PREV/NEXT: Skip backward/Fast forward.

REV/FWD: Fastbackward/Fastforward.

P/N: Select PAL or NTSC(DVD)/

TV/RADIO: Switch between Digital Radio and DVB-T modes.(DVB)

SLOW: Press to slow motion playback(DVD)/EPG:

Shows the electtronic program guide (DVB).

AUDIO: Choose different output language/LANG

REPEAT: Repeat the playback of the current disc.(DVD)

MUTE: Select the sound ON/OFF.

GOTO: When under DVD mode or playing PVR file, press this

key can select expected playback-place directly.(DVD)

PLAY/PAUSE: Select the pause or play the disc.

Remote Control

3

STOP: Press this key to stop playback.

RANDOM: Random play mode.(DVD)/RECORD

A-B: Repeat the playback of the section.(DVD)/TIMESHIFT(DVB)

DVB/DVD: Select DVB/DVD mode.

VIDEO: Select video output mode.(DVD)/LIST: Display all

programs.(DVB)

ZOOM: Zoom in or out the current picture. (DVD)/

in Teletext and Media Player mode.

Media Player mode.

RED: Colour function

STEP(DVD)/ASPECT(DVB)/GREEN: Colour function in Teletext and

HDMI: Switch to high definition digital video output mode./YELLOW:

Colour function in Teletext and Media Player mode.

Q-PLAY: Skip the beginning advertisement of the movie (DVD)/BLUE:

Colour function in Teletext and Media Player mode.

TIMER: Access to the timer.

Connecting to a Television

For a basic connection from your Set Top Box to the television, use the

Composite connection outlined below.

For a higher quality connection, use the Component Video connection

outlined below combined with the Composite Audio Connection.

For the highest quality connection use a direct HDMI connection,

see below.

4

System Setup

5

When the unit is working, press the SETUP key to enter the setup menu (See picture below)

A. 4:3panscan: When the unit and the TV set are connected,

a wide image is shown on screen, but some sides are cut.

B. 4:3letterbox: When the unit and the TV set are connected,

a wide image is shown on screen, but some sides are cut.

This function is unavaliable if there are no captions

recorded in the disc. If the captions function is off, turn it

on by pressing the caption key on the remote control.

Choose between 1x and 2x.

2. Some menu setup items are related with other setup items hence it may be impossible to change

some settings in some menu's. If the setup item is in Gray, that means you cannot change the settings.

3. The setup will be memorized eventhough the unit has been turned off.

* Please note that the instructions manual is for basic operation only.

saver is set to on.

System Setup

6

Remember the current playtime, if this function is set to on, the cd will begin from the same place where

is stopped the previous time.

Select On to display MP3 Lyrics or Off to turn them off.

There are two options to choose from: LT or RT

a dolby digital disc, DTS

System Setup

7

Only in OPEN or NO DISC mode, press the STOP

button twice to enter the preferences setup page.

The unit is compatible with any TV set arounf the world.

In this section you have to select the TV type.

Auto: Selects the TV system automatically.

You can adjust the parental control settings in this item.

Set the rating so that innapropriate content is not

shown to kids.

This setting will restore the whole unit back to its default

factory settings. Use this function carefully.

When setting the password, the following screen will

be shown:

The default password is 8806. Once you have change

the password, press OK to save the changes.

When the TV type is inconsistent with this setup, the

screen will show black stripes.

First Time Installation

8

After all connections have been made properly, switch on TV and make sure the unitis connected

to the Main Power. Press Power button to switch the unit on.

If you are using the unit for the first time or have restored the unit to factory default, the installation

guide menu will appear on your TV screen.

((1) [OSD Language] press RIGHT/LEFT key to select a language.

(2) [Country] press RIGHT/LEFT key to select your country of residence.

(3) [Channel Search] press RIGHT or ENTER key to begin Automatic channel search.

(4) Once channel tuning is complete, you can start watching TV programs.

Basic Operation

(1). Program Manage Settings

To access the Menu, press the MENU button and select [Program]. using the RIGHT/LEFT keys

to navigate through the menu.

The Menu provides option to adjust the Program Manage Settings. Select an option and press

ENTER or RIGHT to adjust that setting. Press the EXIT button to exit the Menu.

(a) Program Edit

To edit your program preferences (lock, skip, favourite, move or delete), you will need to enter the

Program Edit Menu. This Menu requires a password to access. Enter the default password '000000'.

The master unlock password is '888888' .

First Time Installation

9

Set Favourite Channels

You can create a short list of favourite programs that you can easily access.

Set Favourite TV or Radio program:

1. Select your desired channel then press the FAVOURITE button.

Aheart-shaped symbol will appear and the channel is marked as a favourite.

2. Repeat the previous step to select more Favourite channels .

3. To confirm and exit the Menu, press the EXIT key.

Disable Favourite TV or Radio channel :

Select the Favorite channel and press Favorite button on the remote control to cancel.

View Favourite Channel:

1. While in normal viewing mode, press favourite button and the favourite menu will appear.

2. Press UP/DOWN to browse through your favourite channels.

3. Press ENTER to select your favourite channel.

Delete a TV or radio program

1. Select the program and then press the B LUE button. a warning message will appear, press

ENTER to delete the channel.

2. Repeat the previous step to select more channels to delete.

Skip TV or radio channel

1. Select the channel you would like to skip and press the green button. a skip symbol is displayed

the channel is marked as skip.

2. Repeat the previous step to skip more channels.

3. To save your settings and exit the menu, press exit ke y.

Disable the skip channel function:

Select the skip channel and press the green button on the remote control to cancel.

Move a TV or Radio Program

1. Select the preferred channel then press the RED button. A move symbol will appear.

2. Press UP/DOWN to move the channel.

3. Press ENTER to confirm.

4. Repeat the above steps to move more channels.

Lock Program

You can lock selected programs for restricted viewing .

First Time Installation

10

Lock a TV or Radio channel :

1.Select the preferred channel then press the YELLOW button. A lock-shaped symbol is displayed.

The channel is now marked as locked.

2. Repeat the previous step to select more channels.

3. To confirm your settings and exit the menu, press the EXIT button.

4. Press the YELLOW button to disable the locked channels function.

5. To view the locked channels , you will be required to enter either the default password '000000'

or your last set password. The master unlock password is '888888 '.

b) EPG (Electronic Programming Guide)

This feature shows the TV program listings for each channel for the following 7 days. By default,

when the EPG is opened, the current channel's listings are shown. To view listings for other

channels, press the LEFT and RIGHT arrow keys. The display shows the buttons to press to go

forward or backward in the programs listing.

Note: Please see section (d) "Scheduling" to learn how to schedule program recordings and

channel preview.

Preview Channel:

To set the receiver to change to a channel at a specific time (e.g. at the start of your favourite

program) while you are watching another channel, please follow these steps:



 TV channel using the LEFT / RIGHT arrow keys.

 TV program you want to watch later.



as well as optionally selecting to repeat this action on a regular basis.

View" in the "Mode" option.



A few seconds before changing channels, a warning message with a count-down is displayed on

screen, which will change to the programmed channel when the count-down ends.

(c) Sort

Sort your channels from the following options:

[By LCN] - Sort the channels in ascending order.

[By Service Name] - Sort the channels in alphabetical order.

First Time Installation

11

[By Service ID] - Sort the channels according to the station.

[By ONID] - Sort the channels according to ONID.

(d) LCN (Logical channel number)

Set LCN on or off.

(2). Picture Setting

To access the Menu, press MENU then select [Picture] using the RIGHT/LEFT key. The Menu

provides options to adjust the video settings. Press UP/DOWN to select an option and press

RIGHT/LEFT to adjust that setting. Press EXIT to exit the menu.

(b) Resolution

(a) Aspect Ratio

Choose from the different types of Aspect Ratios available:

4:3 Letter Box

4:3 Pan & Scan

4:3 Full

16:9 Wide

16:9 Pillar Box

16:9 Pan & Scan

Auto

You can change this setting if the picture resolution does not appear to be correct. This setting is

to match the most common setting for HDMI.

[480P]: for NTSC TV system.

[576P]: for PAL TV system.

[720P]: for NTSC or PAL TV system.

[1080I]: for NTSC or PAL TV system.

(c) TV Format

If the picture does not appear to be correct you can change this setting.

This should match the most common setting for TVs in your country.

[NTSC]: for NTSC system TV.

[PAL]: for PAL system TV.

(d) Video output

Set the format for the scart video output;

RGB: Scart output RGB;

CVBS: Scart output CVBS;

(3). Channel Search

To access the menu, press MENU and select [Search Channel] using the RIGHT/LEFT keys.

This menu provides options to adjust the search channel settings.

Press UP/DOWN to select an option and press RIGHT/LEFT to adjust the setting .

Press EXIT to exit the menu.

First Time Installation

12

(a) Auto Search

This option will automatically search for channels and save them once the scanning is complete.

All previously saved channels and settings will be deleted.

1. Select [Auto Search] and press ENTER or RIGHT to start channel search.

2. To cancel channel search, press EXIT. Any channels that have been found will be saved.

(b) Manual Search

This option allows you to scan for new channels without deleting previously saved channels and

settings.

1. Select [Manual Search] then press ENTER or RIGHT. The channel search screen will appear.

2. Press the RIGHT/LEFT key to select the channel frequency.

3. Press ENTER to start searching channels.

First Time Installation

13

If a channel is found, it is saved and added to the channels list. If channels can not be found

during searching, the unit will exit automatically.

(c) Country

Select your country of residence.

(d) Antenna Power

Enable Antenna Power if an external active antenna is connected.

(4). Time Setting

To access the enu, press MENU then select [Time] using the RIGHT/LEFT keys. The menu

provides options to adjust the time settings.

Press UP/DOWN to select an option and press RIGHT/LEFT to adjust the settings. press exit to

exit the menu.

(a) Time offset

Select auto ormanual for GMT offset adjustments.

(b) Country Region

Select the Country Region when [Time Offset] is set to Auto.

(c) Time Zone

(d) Sleep

Select the

Select after how long should the unit enter into sleep mode if not button has been pressed during

the set period of time. Range from 1 Hour - 12 Hours or OFF.

Time Zone Offset when [TimeOffset] is set to Manual.

(5). Option

To access the menu, press MENU select [Option] using the RIGHT/LEFT keys. The menu provides

options to adjust the OSD Language, Subtitle Language and Audio Language.

Select an option and press RIGHT/LEFT to adjust the setting.

Press EXIT to exit the menu.

First Time Installation

14

(a) OSD (On Screen Display) Language

Select an OSD language.

Set the age limit for certain programs.

When entering this menu item, you will be prompted to enter a password. The default password

is 000000. Select the age limit you would like to set and press the [EXIT] button to save the

changes and return to the main menu.

Select the preferred audio formats --> PCM/RAW

(b) Subtitle Language

(d) Digital Audio

Select the preferred subtitle language.

(c) Audio Language

Select the preferred audio language for watching TV channels. If the language is not available,

the default program language will be used.

(6). System Setting

To access the menu, press MENU and select [System] using the RIGHT/LEFT keys. The menu

provides options to adjust the system settings.

Press the UP/DOWN key to select an option and press RIGHT/LEFT to adjust the setting. Press

EXIT to exit the menu .

(b) Set Password

(a) Parental Guidance

Set or change the password for locked programs. Enter your old password or the default password

'000000'. You will then be asked to enter your new password. Press ENTER button to confirm your

new password.

Once it is confirmed, press EXIT to exit the Menu. The master unlock password is '888888' .

(c) Restore Factory Default

Reset your Set Top Box to the Default Factory Settings.

In Main Menu select [Restore Factory Default] using the RIGHT/LEFT keys and press ENTER or

RIGHT to select. Enter your password or the default password '000000' and press ENTER to confirm.

First Time Installation

15

(a) Multimedia:

When a USB device is attached you can select from the Music, Photo or Movie options in this

menu using theRIGHT/LEFT keys and ENTER to select. If a USB device is not connected, the

warning message "No USB device is Found" will appear.

This option will delete all preset channels and settings.

This option will only be available when a USB is plugged in. If you would like to upgrade the

software, make sure you have the correct version of the software before performing an upgrade.

Please contact Sytech Service Center for more help on this matter.

The master unlock password is '888888 '.

(d) Information

(e) Software Update

View model, hardware and software information.

(7). USB

To access the Menu, press the MENU button and select [USB] using the RIGHT/LEFT keys. The

menu provides options to playback Music, Photo and Multimedia files. It can support AVI, MP3,

JPEG and BMP formats.

The unit will only support USB device with FAT32 / NTFS file system.

Page is loading ...

Sytech SY-425HD Owner's manual

This manual is also suitable for

Sytech SY-425HD Owner's manual

in other languages

Related papers

Other documents