THANK YOU
USE AND CARE GUIDE
TWO-HANDLE ROMAN TUB FAUCET
Questions, problems, missing parts? Before returning to the store,
call Glacier Bay Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
1-855-HD-GLACIER
HOMEDEPOT.COM
Model #65602-8004
65602-8096H
We appreciate the trust and condence you have placed in Glacier Bay through the purchase of this roman tub
faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see
our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!
REV.01YOW
2
Table of Contents
Safety Information ....................................2
Warranty ...................................................2
Pre-Installation .........................................3
Planning Installation ..............................3
Tools Required .......................................3
Hardware Included .................................3
Package Contents ..................................4
Installation ................................................5
Operation...................................................8
Care and Cleaning ....................................8
Service Parts
...........................................
9
Safety Information
Please read and understand this entire manual before
attempting to assemble, operate, or install the product.
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
Warranty
LIMITED LIFETIME WARRANTY
Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our
limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of
defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective.
Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD-GLACIER (1-855-434-
5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer
purchaser must be made available for all Glacier Bay warranty claims.
This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and
tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended
duration of warranty.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other
rights that vary from state to state and province to province. Please see a store or contact 1-855-HD-GLACIER for
more details.
3 HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
Pre-Installation
PLANNING INSTALLATION
Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package
Contents and Hardware Included list. If any part is missing or damaged, do not attempt to install the product.
TOOLS REQUIRED
Adjustable
wrench
Safety
goggles
Phillips
screwdriver
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA
Part Description Quantity
AA 1Hex wrench
Flashlight Basin wrench
4
Pre-Installation (continued)
PACKAGE CONTENTS
N
M
L
K
Q
I
H
G
F
E
P
O
D
C
J
B
A
Part Description Quantity
A 1
B Rubber washer 1
C Metal washer 1
Spout assembly
D 1
E Index 2
F Screw 2
Nut
G 2
H Inverter 2
I Flange 2
Handle
J 1Hot end valve
K 1Cold end valve
L 2Rubber washer
M 2Metal washer
N 2Mounting nut
O 1
T-tube
Q 2Hose
P 1
Clip
Part Description Quantity
5 HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
Installation
1
Preparing for installation
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□ Drill 1-3/8 in. holes in the nished deck as
shown in the diagram below.
NOTE: This kit allows up to 1-1/4 in. deck thickness.
2
Installing the spout assembly
□ Place the spout assembly (A) through the middle
mounting hole in the deck.
□ Secure the spout assembly (A) with the rubber
washer (B), metal washer (C), and nut (D). Use
the basin wrench to tighten the nut (D).
B
C
D
A
5 in. min.
1-1/8 in.
8~16 in.
3 in. min.
1-3/8 in.
1-1/4 in. MAX DECK THICKNESS
6
Installation (continued)
3
Installing the hot and cold
valves
□ From underneath the deck, insert the cold end
valve (K) with the rubber washer (L), metal
washer (M), and mounting nut (N) through the
hole on the right (cold) side.
□ From above, thread the ange (I) onto the
valve stem.
□ Tighten the mounting nut (N) using a basin
wrench, so that the ange (I) sits ush against
the nished deck surface.
4
Installing the handle
assemblies
□
□ Repeat this procedure for the hot end valve
(J) on the left (hot) side.
K
J
I
M
L
N
E
F
G
H
1
Place the inverters (H) and handles (G) onto the
the valve stems and secure them with the
screws (F). Use a Phillips screwdriver to tighten
the screws (F). Insert the indexes (E).
7 HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
Installation (continued)
5
Installing the T-tube
□ From below the deck, push the T-tube (P) onto
the spout shank (1) until it is completely seated.
Place the clip (O) through the slots (2).
6
Making the waterline
connections
□ Connect the water supply lines (1) to the faucet
inlets (2). (Supply lines are not included.)
7
Connecting the hoses
□ Connect the hoses (Q) to the bottom of the hot and
cold end valves (J & K), as shown.
□ Align the T-tube (P) in a position that will allow
maximum clearance to connect the hoses.
□ Carefully bend the hoses (Q) to t in the available
space, and carefully thread the hose (Q) couplings
onto the sides of the T-tube (P). Tighten all
connections with a wrench.
1
2
O
P
2
2
1
1
K
P
Q
J
8
Care and Cleaning
□
□
□ Do not use abrasive cleaners when cleaning this faucet.
1
Flushing and checking for leaks
□ After installation is completed, turn on the water
supply and allow both hot and cold water to
run for at least one minute each. This ushes
away any debris that could cause damage to
internal parts.
□ While the water is running, check for leaks.
Operation
9 HOMEDEPOT.COM
Please contact 1-855-HD-GLACIER for further assistance.
Service Parts
*Specify Finish
Metal washer RP64024
Part Description Part Number
1 RP10003*
2 Screw RP50005
3
4
5
6
Handle seat RP17019*
7
Handle RP13081*
8
Inverter RP64044
9
Bonnet
RP70001
Index
13
Cartridge (C) RP20014
O-ring RP60047
11
T-tube RP70124
Clip RP70123
Part Description Part Number
10
Flange RP80103*
12
Cartridge (H)
RP20013
14
Rubber washer RP64023
15
16
Mounting nut RP56014
17
Rubber washer RP64032
18
Metal washer RP64033
19
Nut RP56015
RP70042
Hose
16
17
18
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
19
Questions, problems, missing parts? Before returning to the store,
call Glacier Bay Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
1-855-HD-GLACIER
HOMEDEPOT.COM
Retain this manual for future use.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/