Glacier Bay 67416-3701 Installation guide

THANK YOU

USE AND CARE GUIDE

TWO-HANDLE ROMAN TUB FAUCET

Questions, problems, missing parts? Before returning to the store,

call Glacier Bay Customer Service

8 a.m. - 6 p.m., EST, Monday - Friday

1-855-HD-GLACIER

HOMEDEPOT.COM

Model #67416-3701

67416-3704

faucet. We strive to continually create quality products designed to enhance your home. Visit us online to see

our full line of products available for your home improvement needs. Thank you for choosing Glacier Bay!

REV.02YOW

2

Table of Contents

Safety Information ....................................2

Warranty ...................................................2

Pre-Installation .........................................3

Planning Installation ..............................3

Tools Required .......................................3

Hardware Included .................................3

Package Contents ..................................4

Installation ................................................5

Operation...................................................8

Care and Cleaning ....................................8

Service Parts

...........................................

9

Safety Information

Please read and understand this entire manual before

attempting to assemble, operate, or install the product.

CAUTION: Always turn off the water supply before

removing an existing faucet or replacing any part of a

faucet. Open the faucet handle to relieve water pressure

and ensure that the water is completely shut off.

Warranty

LIMITED LIFETIME WARRANTY

Glacier Bay products are manufactured with superior quality standards and workmanship and are backed by our

limited lifetime warranty. Glacier Bay products are warranted to the original consumer purchaser to be free of

defects in materials or workmanship. We will replace FREE OF CHARGE any product or parts that proves defective.

Simply, return the product / part to any of The Home Depot retail locations or call 1-855-HD-GLACIER (1-855-434-

5224) to receive the replacement item. Proof of purchase (original sales receipt) from the original consumer

purchaser must be made available for all Glacier Bay warranty claims.

This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and

tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended

duration of warranty.

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other

rights that vary from state to state and province to province. Please see a store or contact 1-855-HD-GLACIER for

more details.

3 HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Pre-Installation

PLANNING INSTALLATION

Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package

Contents and Hardware Included list. If any part is missing or damaged, do not attempt to install the product.

TOOLS REQUIRED

Adjustable

wrench

Safety

goggles

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

AA

Part Description Quantity

AA 1Hex wrench

Basin wrench

4

Pre-Installation (continued)

PACKAGE CONTENTS

Part Description Quantity

A 1

B Set screw 1

C Index 1

Spout assembly

D 1

E Middle body 1

F Rubber washer 1

Connector

G 1

H Nut 1

Metal washer

I 2Handle

J 2Flange

K 1Hot end valve

L 1Cold end valve

M 2Rubber washer

N 2Metal washer

O 2Mounting nut

P 2Hose

Part Description Quantity

A

B

C

D

F

G

H

E

I

J

L

M

N

K

O

P

5 HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Installation

Preparing for installation

1

CAUTION: Always turn off the water supply before

removing an existing faucet or replacing any part of a

faucet. Open the faucet handle to relieve water pressure

and ensure that the water is completely shut off.

□ Drill 1-3/8 in. holes in the nished deck as

shown in the diagram below.

2

Installing the middle body

□ From underneath the deck, insert the middle

body (E) with the rubber washer (F), metal

washer (G) and nut (H) through the mounting

hole.

□ From above, thread the connector (D) onto the

middle body (E).

NOTE: This kit allows up to 1-1/4 in. deck thickness.

5 in. min.

1-3/8 in.

1-1/8 in.

1-1/4 in. MAX DECK THICKNESS

8~16 in.

3 in. min.

□ Tighten the nut (H) using a basin wrench, so that

the connector (D) sits ush against the nished

deck surface.

H

G

F

E

D

6

Installation (continued)

3

Installing the spout assembly

□ Install the spout assembly (A) onto the

connector (D). Be sure the spout assembly

is resting rmly on the deck.

□ Push down on spout and tighten set screw (B)

with the Hex wrench (AA). Insert the index (C).

4

Installing the hot and cold

valves and handle assemblies

D

A

AA

C

B

□ Thread the handle (I) onto the ange (J).

□ Repeat this procedure for the hot end valve (K)

on the left (hot) side.

□ From underneath the deck, insert the cold end

valve (L) with the rubber washer (M), metal

washer (N), and mounting nut (O) through the

hole on the right (cold) side.

□ From above, thread the ange (J) onto the valve.

□ Tighten the mounting nut (O) using a basin

wrench, so that the ange (J) sits ush against

the nished deck surface.

NOTE: After install handle assembly, if the handle seat is

not aligned with handle in a line as shown in the

above diagram (2), rotate the handle seat back (the

ratating angle can not exceed 90°) to make the

handle seat align with handle in a line.

K

1

L

O

N

M

I

2

J

7 HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Installation (continued)

5

Making the waterline

connections

□ Connect the water supply lines (1) to the faucet

inlets (2). (Supply lines are not included.)

6

Connecting the hoses

□ Connect the hoses (P) to the bottom of the hot

and cold end valves (K & L), as shown.

□ Align the middle body (E) in a position that will

allow maximum clearance to connect the

hoses (P).

□ Carefully bend the hoses (P) to t in the available

space, and carefully thread the hose (P) couplings

onto the sides of the middle body (E). Tighten all

connections with a wrench.

2

1

P

K

L

E

8

Care and Cleaning

□

□ Do not use abrasive cleaners when cleaning this faucet.

1

Flushing and checking for leaks

□ Turn on the water supply and allow both hot

and cold water to run for at least one minute

each. This ushes away any debris that could

cause damage to internal parts.

□ While the water is running, check for leaks.

□ Turn off the water.

Operation

9 HOMEDEPOT.COM

Please contact 1-855-HD-GLACIER for further assistance.

Service Parts

*Specify Finish

Part Description Part Number

1

2

3

Handle RP13322*

4

5

Flange RP70439

6

Bonnet RP70001

7

Cartridge (H) RP20035

8

Cartridge (C) RP20036

9

Rubber washer

RP64023

Aerator RP30036

16 Nut RP56088

17 Hex wrench RP70332

18 Hose RP70042

Part Description Part Number

Metal washer RP64024

Mounting nut RP56014

10 Set screw RP50054

11 Index RP10067*

12 O-ring RP60056

13 O-ring RP60094

14 Rubber washer RP64035

15 Metal washer RP64036

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

18

17

Questions, problems, missing parts? Before returning to the store,

call Glacier Bay Customer Service

8 a.m. - 6 p.m., EST, Monday - Friday

1-855-HD-GLACIER

HOMEDEPOT.COM

Retain this manual for future use.

Page is loading ...

Glacier Bay 67416-3701 Installation guide

This manual is also suitable for

Glacier Bay 67416-3701 Installation guide

in other languages

Related papers

Other documents