Wolf Garten Premio 32 E Operating instructions

Esprit 34 E

Esprit 36 E

Premio 32 E

Premio 34 E

Premio 36 E

www.WOLF-Garten.com

Gebrauchsanweisung

2-7, 50-54

Instruction manual

2-3, 8-11, 50-54

Mode d’emploi

2-3, 12-15, 50-54

Istruzione d’uso

2-3, 16-19, 50-54

Gebruiksaanwijzing

2-3, 20-23, 50-54

Brugsanvisning

2-3, 24-27, 50-54

Käyttöohje

2-3, 27-30, 50-54

Bruksanvisning

2-3, 31-34, 50-54

Bruksanvisning

2-3, 34-37, 50-54

Návod k použití

2-3, 38-41, 50-54

Használati utasítás

2-3, 42-45, 50-54

Instrukcja obslugi

2-3, 46-54

- Beschreibung - Description - Description - Denominazione - Omschrijving -

- Beskrivelse - Selostus - Beskrivelse - Beskrivning - Popis - Leírás - Opis -

2

1 Ein-/Ausschalter

2

Kabelführung (Premio)

3 Kabelzugentlastung

4 Griffbefestigung

5 Füllstandsanzeige (Premio)

6 Schutzklappe

7 Grasfangkorb

8

Griffhöheneinstellung (34/36 E)

9

Schnitthöhenanzeige

(Premio 32 E)

10

Schnitthöheneinstellung

(Premio 32 E)

11 Kabel-Knickschutz

12

Schnitthöheneinstellung

(34/36 E)

13

Schnitthöhenanzeige (34/36 E)

1 On-/Off-switch

2 Cable-guide (Premio)

3 Cable-kink protection

4

Fitting of handle

5

Filling indicator (Premio)

6

Deector plate

7

Collector

8

Handleheight adjustment/

Fitting of handle (34/36 E)

9

Indicator to cutting height

(Premio 32 E)

10

Height adjustment

(Premio 32 E)

11 Cable anti-king protection

12

Height adjustment (34/36 E)

13 Indicator to cutting height

(34/36 E)

1

Interrupteur

2

Guide-cable (Premio)

3

Cable-xe

4

Fixation du guidon

5

Indicateur du niveau de

remplissage (Premio)

6

Clapet de sécurité

7

Bac de ramassage

8

Reglagede la hauteur du guidon/

Fixation du guidon (34/36 E)

9

Croquis de la hauteur de coupe

(Premio 32 E)

10

Reglage de la hauteur de coupe

(Premio 32 E)

11 Protection antipliage du câble

12

Reglage de la hauteur de coupe

(34/36 E)

13

Croquis de la hauteur de coupe

(34/36 E)

1

Virtakytkin

2

Kaapelinohjain (Premio)

3

Vedonpoistin

4

Aisan kiinnittäminen

5

Täyttöasteen ilmaisin (Premio)

6

Suojaluukku

7

Korikerääjä

8

Aisan korkeuden säätäminen

(34/36 E)

9

Leikkuukorkeuden ilmaisin

(Premio 32 E)

10

Leikkuukorkeuden säätö

(Premio 32 E)

11

Kaapelin taittosuoja

12

Leikkuukorkeuden säätö

(34/36 E)

13 Leikkuukorkeuden ilmaisin

(34/36 E)

1 Bryter

2 Glideskinne (Premio)

3 Ledningsavlaster

4 Styretskruer

5 Oppsamlingsmåling

(Premio)

6 Bakplate

7 Opsamler

8 Styrethřydeinstilling/

Styretskruer (34/36 E)

9 Hoydemerkingen

(Premio 32 E)

10 Hoyde innstilling

(Premio 32 E)

11

Knekkebeskyttelse for kabel

12 Høyde innstilling

(34/36 E)

13 Høyde merkingen

(34/36 E)

1 Strömbrytare

2 Sladdföraren (Premio)

3 Ledningsavlasten

4 Grebs fastgørelse

5 Mätars för fyllnadsnivån

(Premio)

6 Backplaten

7 Opsamler

8 Grebshøjden instilling/

Grebs fastgørelse (34/36 E)

9 Skœrehøjden mærkerne

(Premio 32 E)

10 Skærehøjden instilling

(Premio 32 E)

11 Kabel-knäckskydd

12 Skærehøjden instilling

(34/36 E)

13 Skærehøjden mærkerne

(34/36 E)

1 In-enuitschakelaar

2 Kabelgeleiding (Premio)

3 Trekontlasten

4 Duwboombefestigung

5 Vulindicator (Premio)

6 Achterklep

7 Grasvangvoorziening

8

Duwboomhoogte instelling/

Duwboombefestigung (34/36 E)

9 Maaihoogte aanwijzing

(Premio 32 E)

10 Maaihoogte instelling

(Premio 32 E)

11 Knikbescherming

12 Maaihoogte instelling

(34/36 E)

13 Maaihoogte aanwijzing

(34/36 E)

1 Strömbrytare start-stop

2 Glideskinne (Premio)

3 Avlastningsanordning

4 Fastkruvning av handtaget

5 Indikator for græsmængde

(Premio)

6 Baklucken

7 Upsamlaren

8

Inställning av handtaget/Fast

kruvning av handtaget (34/36 E)

9

Höjdavläsning av klipphöjden

(Premio 32 E)

10 Inställning av klipphöjden

(Premio 32 E)

11 Kabelknækbeskyttelse

12 Inställning av klipphöjden

(34/36 E)

13

Höjdavläsning av klipphöjden

(34/36 E)

1 Spínač

2 Vedení kabelu (Premio)

3 Omezovač tahu kabelu

4 Upevnění rukojeti

5

Indikátor plnění koše (Premio)

6 Ochranný kryt

7 Koš

8 Nastavení výšky rukojeti/

Upevnění rukojeti (34/36 E)

9 Ukazatel výšky střihu

(Premio 32 E)

10 Nastavení výšky střihu

(Premio 32 E)

11 Startovaci madlo

12 Nastavení výšky střihu

(34/36 E)

13 Ukazatel výšky střihu

(34/36 E)

1

e- / kikapcsoló

2

kábelvezető (Premio)

3

kábelkihúzás gátló

4

fogantyú rögzítő

5

töltöttségi-szintmutató

(Premio)

6

védőfedél

7

fűgyűjtő

8

fogásmagasság beállítás

/

fogantyú rögzítő (34/36 E)

9

nyírásmagasság jelző

(Premio 32 E)

10

nyírásmagasság állító

(Premio 32 E)

11

kábeltörés gátló

12

nyírásmagasság állító

(34/36 E)

13

nyírásmagasság jelző

(34/36 E)

1 Interruttore per avviare

2 Slitta Premio (Premio)

3 Portacavo

4 Fissare l’impugnatura

5 Indicatore di pieno carico

(Premio)

6 Deettore

7 Raccoglierba

8 Regolazione impugnatura/

Fissare l’impugnatura (34/36 E)

9

Indicator dell’altezza di taglio

(Premio 32 E)

10 Regolazione dell’altezza

di taglio (Premio 32 E)

11

Regolazione profondità di lavoro

12

Regolazione dell’altezza di

taglio (34/36 E)

13

Indicator dell’altezza di taglio

(34/36 E)

1

Włącznik / wyłącznik

2

Prowadnica kabla (Premio)

3

Zabezpieczenie przed

splątaniem kabla

4

Mocowanie ramy uchwytu

5

Wskaźnik stanu napeł-

nienia (Premio)

6

Klapa ochronna

7

Kosz

8

Regulacja wysokości uch-

wytu/Mocowanie ramy

uchwytu (34/36 E)

9

Wskażnik wysokości cięcia

(Premio 32 E)

10

Regulacja wysokości cięcia

(Premio 32 E9

11

Ochrona przeciwzgięciowa kabla

12

Regulacja wysokości cięcia

(34/36 E)

13 Wskażnik wysokości cięcia

(34/36 E)

ø

3

- Wartung - Maintenance - Entretien - Manutenzione - De verzorging - Vedligeholdelse -

- Huolto - Vedlikehold - Underhåll - Údržba - Karbantartás - Konserwacja -

- Betrieb - Operation - Utilisation - Messa in opera - In werking stellen -

- Drift - Käyttö - Drift - Funktion - Provoz - Üzemeltetés - Eksploatacja -

- Montage - Assembly - Montage - Montaggio - Montage - Montering -

- Asennus - Montering - Montering - Montáž - Szerelés - Montaž -

Page is loading ...

Our know-how for your beautiful lawn

Congratulations on your purchase of a WOLF lawn mower. You have thereby chosen a machine built to the latest standards of technology to

provide you with perfect lawn care.

To ensure that you have great pleasure from your lawn, we have included several hints on sowing, refurbishment and care. The seed is important!

A high quality seed is the basis for a beautiful lawn. We recommend two excellent products for sowing new lawns:

WOLF lawn seed >>Supra<<

This high-quality mixture of lawn seeds features an extremely dense growth which doesn‘t give moss or weeds a chance. Another advantage

of >>Supra<< lawns: they grow as well in the shade as in sunny spaces.

WOLF lawn seed >>Loretta<<

>>Loretta<< lawns are extremely rugged and durable and are particularly suitable for heavily used areas. The rapid germination and

regenerative capacity guarantee a dense, hardy lawn in the shortest time .

A new lawn without digging over

Are you dissatisfied with your lawn but don‘t want to tackle the job of sowing a completely new one? - No problem, we can show you how to

transform your lawn quickly and without extensive work into the most beautiful lawn without digging over.

The lawn renewal system „Novaplant

®

“ will quickly and easily provide you with a beautiful, dense and durable lawn which will be the envy of your neighbours.

All that you need are a lawn mower, a cultivator and WOLF Novaplant

®

>>Supra<< (apart from a special kick-start fertiliser, this contains the high-quality

>>Supra<< lawn mixture) or WOLF Novaplant

®

>>Loretta<< (apart from a special kick-start fertiliser, this contains the high-quality >>Loretta<< lawn mixture).

After 5 simple steps and in only 6 weeks, you will have transformed your old lawn into the lawn of your dreams with this unique lawn renewal system.

Perfect lawn care

The following guidelines for lawn care show you how to keep the lawn of your dreams beautiful for a long time.

Mowing:

Important for the density and durability of the lawn. We recommend regular mowing once per week always at the same cutting height: not lower

than 3.4 cm, not higher then 5 cm, 5 cm is ideal in the shade. If the lawn has grown higher than 8 cm, possibly in Spring or after holidays, it

is necessary to cut this back in stages.

Fertilising:

Provides the lawn with the necessary nutrients, keeps it healthy and durable. We recommend 4 x fertilisation per season with a special lawn

fertiliser (please don‘t use general purpose types):

March: WOLF kick-start fertiliser for new lawns May: WOLF lawn fertiliser >>Super<<

July: WOLF lawn fertiliser >>Super<< September: WOLF Vital NK plus

Watering:

An absolute necessity in dry weather. We recommend root-deep watering once to twice per week. The water should penetrate approximately

1ß cm into the soil (10 - 15 litres / m

2

). More water is required under trees.

Cultivating:

Important to remove lawn moss and dead vegetation. At least once per year in the early Spring (April/May). Then clear the removed material

completely from the lawn.

Combating weeds: Removes undesired weeds from the lawn

Use WOLF weed killer plus lawn fertiliser as necessary

Best times: The middle of May to the beginning of September

Combating moss: Removes moss from the lawn

Use WOLF moss killer plus lawn fertiliser as necessary

Best times: Spring and Autumn (see instructions)

For heavy moss growth: Remove moss with a cultivator and reseed

Foliage: Deprives the lawn of light and encourages diseases - must be removed from the lawn as quickly as possible.

Correct and regular care of the lawn is particularly important in the shade. The constant deficiency of light weakens the grasses, blade and

root growth are retarded and diseases can spread quickly.

>>SUPRA<< is currently the best lawn for shady areas. Of course, it also grows very well in sunny spots.

We hope you take great pleasure in your beautiful lawn.

Optimum lawn care with products from WOLF-Garten

It is important that you read, fully understand and observe the following safety precautions and warnings. Careless or improper use of the

machine may cause serious or fatal injury. The user is responsible for any accidents involving other people or other people‘s property.

Meaning of the symbols

8

Safety Instructions

Attention!

Read Instruction manual

before use!

Keep bystanders away!

Keep the supply flexible cord

away from the cutting blade!

Attention !

- Sharp knives - before performing

a maintenance work or if the cable

is damaged pull out the plug.

9

1. General Information:

This lawnmower is intended for the care of grass and lawns in the private sector. Because of the physical hazard to the operator the lawnmower may not be used:

- to trim shrubs, hedges and bushes,

- or cutting climbing plants

- lawns on roof plantings

- in balcony boxes

- for cleaning sidewalks (vacuuming – blowing away – removing snow),

- for chaffing and cutting up tree and hedge cuttings

-

as a tractor (for drive mowers) for lawn turning devices, strewing car, trailer e.g. for passengers transporting cuttings (except in the grass collection

basket provided).

•

Never let children or other persons who are not familiar with the operating instructions use the lawnmower. Juveniles under l6 years may not use the

equipment. Local regulations may specify the minimum age of the operator.

• Never cut your lawn if persons, particularly children and animals are in the vicinity.

• Mow only in daylight or with appropriate artificial lighting.

2. Before Mowing:

• Never mow without wearing firm footwear and long trousers: Never mow barefoot or in open sandals.

•

Attach the baffle provided and/or collection gear. Make certain that it is firmly fitted. Operation without or with damaged protective equipment is forbidden.

•

Examine the cable installed externally on the mower and the connecting cable for damage and ageing (perishing). Use only when in good condition.

• Check the work tool to make certain that the mounting elements are tightly fitted for damage or serious wear.

• Observe the installation instructions when replacing parts.

• Inspect the catcher bag frequently for wear and deformation.

• Check the condition of all outside cables. Ageing and damaged cables must be replaced by a qualified person.

•

Before adjusting or cleaning the tool and before checking for a caught or damaged connecting cable, switch off the tool and disconnect the mains plug.

• Before using, ensure (visually) that the cutting blades and their attaching parts are not blunt or damaged. Replace blunt or damaged cutting blades

by whole sets to avoid imbalance.

3. Cable

•

Please work with safety cables from WOLF. For the connection only lines which are not lighter than rubber hose lines H0 7 RN-F to with a minimum

diameter

of 3 x 1,5 mm

2

must be used.

• The attachments of the connection cables must be rubber or covered with rubber and comply with Standard DIN/VDE 0620.

• Attachments must be splashproof (applicable in Austria only).

• Use a leakage-protective system (RCD) with a leakage current of no more than 30 mA.

•

Attach connection cable to traction relief. Make sure that in does not rub against edges, pointed or sharp objects. Do not squeeze cable through

door or window gaps.

• Switching devices must not be removed or bridged (e.g. tying of switching lever to guide spar).

4. Starting the Motor:

• Switch om motor only when your feet are at a safe distanca from the mower chassis and when standing on firm ground - not in high grass;

• Do not tilt the mower when starting the motor unless the mower must be tilted for starting. If so, do not tilt the mower more than absolutely necessary and

lift only the part farthest from the user. Always ensure that both of your hands are in the working positions before replacing the mower on the ground.

• Do not start the engine if you are standing in front of the ejection channel.

5. During work - for your Safety:

•

ATTENTION - DANGER! Keep hands away from rotating cutter blade and remember that the blade continues to rotate for a short while after the

motor has been switched off;

• Always walk behind the handle bars, holding the upper handle grip with both hands;

•

Keep feet away from the mower chassis and be extra carefull when mowing on hills or slopes to prevent slipping. Mow across the hill, if possible.

Mowe forward at walking pace, never run;

• Avoid pulling the mower backwards (towards you) during work;

• Switch off motor before tilting or lifting the mower and when pushing off the lawn area;

• Never use the mower when the protective parts are damaged or safety equipment such as the deflector and/or grass catching parts are missing;

• Use the height adjustment only when the mower is stationary and the rotating blade has come to a complete standstill;

• Before removing the grassbox switch off the motor and wait until the rotating blade has come to a complete standstill;

• Never push mower over gravel with running motor;

• If possible, avoid mowing in wet coditions;

•

Switch off motor and remove cable plug socket before working at the cutter blades, before making any adjustments, when cable has become entangled:

a) before leaving the mower unattended,

b) before attempting to clear a blockade underneath chassis or at rear throe-out,

c) before inspecting, cleaning or working on the mower,

d)

immediately after your mower blade has hit a foreign and hard object. Check the condition of the deck and cutter blade before switching on again,

e) immediately when your mower starts to vibrate strongly. Locate the reason for the vibration and remedy.

• If your mower has a power-drive do switch the power-drive off before starting motor or engine.

•

Should the power cord be damaged during use, immediately disconnect it fromthe mains. Do not touch the cable until it has been disconnected from the mains.

6. Maintenance:

• Switch off motor and remove mains plug before carrying out any repairs or maintenance to your mower;

• Do not clean yor mower with a hose pipe - and particularly not with a high-pressure spray;

• Inspect regularly all visible nuts and bolts - particularly ot the cutter blade - for their tightness;

•

ATTENTION! Sharpening and changing of cutter blades should be done by a qualified service centre because it is necessary that the correct

balance after fixing is guaranteed;

• Damaged and worn parts must always be replaced with original WOLF replacement parts as otherwise your guarantee will be invalidated;

• Your service centre should check your mower regularly and particularly after any hard obstacle hat hit the chassis and/or the cutter blades;

• Store your mower only in a dry room.

•

If cutter blade hits a hard foreign object whilst mowing switch of motor immediately, remove safety key and check cutter blade carefully for damage.

Please observe these hints, as they help you to prevent damage or even accidents!

• Conduct maintenance and cleaning work only when the motor is switched off and the key has been removed.

Safety Instructions

Operating times

Please check noise abatement regulations prevailing in your country.

Assembly

Fixing of handle and adjustment of height (fig. M1/M2/M3/M4)

ATTENTION! Take care that the switch cable does not become caught and crushed when folding the handle frame. Fold upper

handle section forward. Tighten hand wheels firmly.

Premio 32 E:

Fold complete handle backwards and tighten firmly.

Esprit/Premio 34/36 E:

Fold complete handle backwards, position at the correct height and tighten firmly.

Folding of handle frame (fig. M5)

ATTENTION! Take care that the switch cable does not become caught and crushed when folding the handle frame.

Note! Unscrew the lower hand wheels (1) for about 2 cm/.1” either side, pull handle frame (2) either side, pull handle frame clear

of recesses until it can be folded forward easily.

Operation

Assembly of cable relief holder (fig. M6/M7)

Attaching of grassbox (fig. B1)

Lift deflector lid, locate grassbox hook into opening of chassis (see arrow) and replace lid.

Adjustment of cutting height Esprit/Premio 34/36 E (fig. B2)

Only when mower is stationary and rotating blade has come to complete standstill. Press button (a) and push chassis downwards

or pull upwards, as required. Release button at required cutting height (see indicator b).

Adjustment of cutting height to prepare for scarifying Esprit/Premio 34/36 E (fig. B2)

Press button (a), pushing chassis down byholding front grip (c) at the same time until grey area appears at the indicator (b).

Use of height adjustment Premio 32 E (fig. B3)

Only when mower is stationary and rotating blade has come to complete standstill. Holdmowerbyhandle grip fittedon the

rearof the chassis andlift slightly. Pull outblack knobain the centre of left-hand wheels at the rear. Hold knob and push wheel

upwards or downwards allowing knob to engage into one of the position holes as required (follow indicator to determine cutting

height). Proceed with left-hand wheel at front of chassis in the same way.

Selection of Cutting height

If possible, mow when grass is dry in order to protect turf. Do not se cutting position too low when mowing very hight or wet grass.

We recommend an average cutting height of 4,0 cm.

Connecting to the mains (230 Volts, A.C., 50 Hz)

The mower operates from any normal household mains supply, provided with a 10 Amps. fuse.

Note: Use a residual current device (RCD) rated for a residual current not greater than 30 mA.

Starting (fig. B4/B5)

Switch on motor with mowerplaced on level and firm ground, not in high grass - alternatively tilt slightly.

Switch-on motor (fig. B5)

1. Depress button and hold (1).

2. Lift up bar and release button (2).

Switch-off motor (fig. B5)

Release bar (2).

Mowing (fig. B6)

Always let cable trail on the cut side of the lawn. Cable guidance: Place the cable firmly off the lawn or on the already cur

side of the lawn when starting to mow.

Emptying of Grassbox Esprit 34/36 E

The grassbox is full and should be emptied as soon as grass clippings remain uncollected on the ground behind your mower.

Note: Disconnect electricity by unplugging cable at the socket-before proceeding.

Emptying of Grassbox Premio 32/34/36 E (fig. B7)

l Box Filling Indicator: the flap drops down when grassbox is full. lTo ensure properfunctioning of the indicator it is important that

the grilles beloware kept clean using a hand brush.

Cleaning (fig. W1)

Note: Disconnect electricity by unplugging cable at the socket before proceeding. Attention: Keep hands clear of moving blade.

Clean mower thoroughly after each mowing with cloth or brush. Do not spray with water. Keep mower in a dry room.

Change of cutter blade (fig. W2)

Note: always disconnect mains supply and wear protective gloves before undertaking any workat the cutter blades, cutter bar

and blade coupling. Change cutter blade using 10 mm spanner as illustraded. Torque wrench setting for screws 8-10 Nm. Take care

to carry out this work thoroughly. Use original spare parts only. Note: Sharpining of blades should be done by an approved service

centre as the correct balance of the blade after sharpening is very important and ought to be checked by an expert.

Winter Storage:

Clean mower thoroughly before storing away. Never spray mower with water and do not store it in a wet or humid place. Have

yourmower thoroughly checked once a yearby an approved Service Centre.

Maintenance

10

11

Faults and how to remedy

Remedy (X) by:

Problem Possible cause

WOLF service

workshop

Yourself

Uneven running, heavy vibrations

in the mower

• Blades damaged

• Blades loose in the fastening parts

X

---

X

Motor will not run

• Fuse blown

• Cable damaged

Important! If you inadvertently cut through the cable, the fuse (10

Amp.) will not always blow. In the interest of safety, never touch

damaged or servered cables before disconnecting the mains

plug. Repairing the cable with insulating tape is prohibited.

---

X

---

Poor mowing • Blunt blades X ---

Poor catching

• Blunt blades

• Catcher bag blocked

X

---

X

When in doubt, always consult a WOLF service workshop.

Important: switch off the mower and disconnect the mains plug before inspecting, cleaning or working on the blades.

Please carefully retain the guarantee card completed by the seller, or the proof of purchase.

The company WOLF-Garten provides a guarantee for 24months from the date of purchase. This guarantee is in accordance with the relevant state of

technology and the utilisation purpose / area of application. The consumer‘s statutory rights are not affected by the following guarantee guidelines.

Pre-conditions for the 24-month guarantee entitlement:

- Deployment of the device solely for private use.

The guarantee is reduced to 12 months in the commercial sector or leasing business.

- Proper handling and observance of all information given in the operating manual, which forms part of our guarantee terms.

- Observance of the prescribed maintenance intervals.

- No unauthorised alteration of the design.

- Installation of original WOLF replacement parts / accessories.

- Presentation of the completed guarantee card and/or proof of purchase.

This guarantee does not extend to normal wear-and-tear on blades, blade mounting components or friction disks, V-belts/toothed belts, running wheels/tyres,

air filters, spark plugs and spark plug connectors. Any guarantee claim shall be immediately void in the event of unauthorised repairs.

Faults and defects which can be traced to material or manufacturing faults will be rectified exclusively by our contracted workshops (the seller has the right

to remedy a defect) in your vicinity, or by the manufacturer if the latter is closer. Any claims going beyond the provision of a guarantee are ruled out. There

is no entitlement to a replacement. Any transport damage should be reported not to us but to the shipper in question since, otherwise, any compensation

claims vis-à-vis the shipper would be voided.

Guarantee terms

Page is loading ...