Lightolier 9149 User manual

Brand: Lightolier

Model: 9149

Type: User manual

READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE INSTRUCTION SHEET NO.

“his fixture is intended for installation in accordance with the National Electrical Code and local regulations.

“o assure full compliance with local codes and regulations, check with your local electrical inspector before

IS:9149

wtallation. Toprevent electrical shock, turnoff electricity at fuse box before proceeding.

Retain these instructions for maintenance reference.

0395

Page 1 of 1

TRACKCOUPLER

FOR USE WITH PROFILE TRACK SYSTEMS ONLY

WARNING:

● TURN OFF POWER AT ELECTRICAL PANEL BEFORE INSTALLING ELECTRICAL CONNECTOR AND TRACK.

● DO NOT ATTEMPT TO FEED POWER TO THE TRACK COUPLER.

INSTALLING TRACK COUPLER

1.Remove DEAD ENDS from track SECTIONS. SAVE THE DEAD ENDS.

2. Point the POLARITY TAB away from the BEAD on the track.

3. Push TRACK COUPLER into both track units, Ensure CONTRACT

BLADES insert into the TRACK CONDUCTOR GAPS.

4. Tighten LOCKING SCREW.

5. Install track per Instruction Sheet 9100 which is included with the

track units.

LOCKINGSCREiV—

BEAD

TRACK BEAD

;/,-

— —-

/-..

,&L –_: -—

—t

“-:-~~z-.?

—:i ‘ ~

‘e

‘:i,r_.. —–

——

~A... .... ..

—––-——— \ ---

--y

-\J2

-—-d

\L ~ ‘—-—-

)

‘—

POLARITYTAB

— POLARITYTAB

TRACK UNIT

TRACK COPPER

CONOUCTOR

-CONTACT BLAOE

>~~~<sp

~Q&=-~

~! ,

OEAO ENO -

lmlc31+Tc>l.llm

FALL RIVER, MASSACHUSETTS, 02720

MONTREAL, QUEBEC, CANADA

Lightolier 9149 User manual

Lightolier 9149 User manual

Lightolier 9149 User manual

Related papers

Other documents