Canon REALiS WUX10 User manual

Table of Contents

Safety Instructions

Before Use

Projecting an Image

Useful Functions Available During a Presentation

Setting Up Functions from Menus

Connecting the Projector to Network

Appendix

Index

ENG

MULTIMEDIA PROJECTOR

User’s Manual

2

Features of WUX10 Multimedia Projector

Thank you for purchasing a Canon projector.

The WUX10 Multimedia Projector (hereinafter referred to as "the projector") is a high-per-

formance projector that is capable of projecting a high-resolution computer screen and

high-quality digital image on a large screen.

Major Features

Smooth and Beautiful Imaging Capability

Incorporation of AISYS, Canon's unique optical engine, and the world's first 0.71-inch

WUXGA (1920 x 1200 resolution) LCOS (Liquid Crystal On Silicon) panel achieves a high

brightness, high contrast, and smooth and beautiful lattice-free image.

Native WUXGA Resolution

Native WUXGA resolution ensures projection of a high-quality image in a wider projection

area with a high degree of resolution.

High-powered 1.5X Zoom Lens

1.5X zoom aspheric lens can project a 100-inch image when placed 3 m (9.8') to 4.4 m

(14.4') away. (P31)

"Auto Setup Function" for Making Setup a Breeze

The focus and keystone distortion are automatically adjusted for quick and easy setup of

projector. (P45)

Equipped with HDMI Input Terminal

Connecting the projector to AV equipment via HDMI terminal allows you to project high

quality digital images. (P38)

Network Connectivity

The network connectivity allows you to control and monitor the projector from your com-

puter via the network. (P103-P114)

"Off and Go" Feature

It can be unplugged and packed away immediately. (P62)

* Wait until the cooling fan stops before putting the projector in the carrying bag.

User-Friendly On-Screen Menu

Settings are organized by four tabs. You can easily find settings for each function. (P70-

P101)

Compact and Easy-to-use Wireless Remote Control

It comes with a wireless remote control which allows you to control all functions of this

projector. (P24)

3

Features of WUX10 Multimedia Projector

User's Manual (this document)

This is a User's Manual for the WUX10 Multimedia Projector. This manual provides

detailed information on how to use the projector. Read this manual thoroughly to make the

most of your projector and ensure safety.

Important Information and Quick Start Guide

First read document. It provides information about projector safety, cautions, quick start

guide*, cleaning and replacing the air filter and lamp replacement.

* This guide shows an outline flowchart of the steps to start and stop the projector, as

well as the functions available for projecting images.

Symbols Used in This Manual

Meanings of the following symbols used in this manual are as follows:

A precaution about operation or restriction is given here.

Symbols of Button Operations

The projector can be operated using buttons

on the remote control or the top control of the

projector. The remote control allows you to

operate all functions of the projector. In this

document, the buttons operation is shown as

below.

Indicate the buttons to be pressed

Adjusting the Image Size

Use the ZOOM button to adjust the size of the proj

Change the projector installation position if your de

adjust it with the zoom function. (P31)

1 Press the ZOOM button to pop up a window sho

Remote control Top control

Remote control button operation

Top control button operation

COPYRIGHT NOTICE

Please note that enlarging or reducing the size of an image for commercial pur-

poses or public presentation may infringe on the legally protected copyright or the

copyright holder of the original material.

About Trademarks

• Microsoft, Windows, Windows Vista and Internet Explorer are registered trademarks

or trademarks of Microsoft Corporation in the United States and/or other countries.

• Macintosh and Mac are registered trademarks of Apple Computer, Inc., regis-

tered in the United States and/or other countries.

• HDMI, HDMI logo, and High Definition Multimedia Interface are registered trade-

marks or trademarks of HDMI Licensing, LLC.

4

Quick Reference Guide

This Quick Reference Guide will help you find functions that make full use of the projector,

are useful in producing an attractive presentation, and so on.

Connecting to the Computer (P35 – P37)

Connecting to AV Equipment (P38 – P41)

Starting Projection (P42 – P44)

Selecting an Input Signal (P47 – P48)

Adjusting the Image Size and Focus (P51,

P52)

Adjusting Keystone Distortion (P53)

Adjusting Aspect Ratio (P55 – P60)

Eliminating Flickers from Computer Screen or

Adjusting Positional Shift (P76)

Projecting an Image on a Greenboard (P80)

Selecting an Image Mode Suitable for the

Projecting Image (P85)

Making Fine Color Adjustments (P88)

Removing Noise (P89)

Blackened Out an Image Temporarily (P64)

Freezing the Picture (P64)

Adjusting the Volume (P65)

Muting the Sound (P65)

Zooming an Image (P66)

Showing the Elapsed Time (P67)

Resetting Password (P97)

Initializing a Network Setting (P100)

Resetting to the Default Setting (P100)

Reducing the Lamp Brightness (P91)

Using the Power Saving Mode (P92)

Turning on the Projector by Connecting the

Power Cord (P93)

Disabling the Beep During the Operation (P93)

Disabling Buttons (P94)

Hiding Guide Messages (P95)

Turning Off the Projector LED Lamps (P96)

Setting a Password (P97)

Connecting the Projector

Projecting an Image

Adjusting Image

Adjusting Colors and Image Quality

Producing a Presentation

Ceiling Mounted Projection or Projecting

from behind Screen (P81)

Changing Remote Control Channel

(P94)

Resetting Projector Setting

Miscellaneous Functions

5

Table of Contents

Features of WUX10 Multimedia Projector ..................................................................2

Quick Reference Guide................................................................................................4

Safety Instructions.....................................................................................................10

Safety Precautions.................................................................................................................... 11

■ READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE. .....................................12

AC Power Cord Requirement ................................................................................................... 14

Federal Communication Commission Notice............................................................................ 15

Canadian Radio Interference Regulations ................................................................................ 15

Precautions on Handling the Batteries in the Remote Controller ............................................. 16

Lamp Handling Precautions...................................................................................................... 16

Carrying/Transporting the Projector.......................................................................................... 17

Installation Precautions............................................................................................................. 17

Before Use ........................................................................................................ 19

Supplied Accessories ................................................................................................20

■ Installing the Lens Cap....................................................................................................20

■ Putting the Projector in the Carrying Bag........................................................................ 21

Part Names..................................................................................................................22

Main Unit of Projector ............................................................................................................... 22

■ Front Side ........................................................................................................................22

■ Rear Side.........................................................................................................................22

■ Bottom Side .....................................................................................................................23

Remote Control......................................................................................................................... 24

Top Control ............................................................................................................................... 26

Input Terminals ......................................................................................................................... 27

Preparing the Remote Control ..................................................................................28

■ Installing Remote Control Batteries ................................................................................. 28

■ Remote Control Operating Range...................................................................................28

Projecting an Image ......................................................................................... 29

Steps for Setting Up the Projector and Projecting an Image .................................30

Setting Up the Projector ............................................................................................31

■ Placing in Front of the Screen .........................................................................................31

■ Placing on a Level Place .................................................................................................32

■ When Pointing the Projector Up .....................................................................................33

Connecting the Projector ..........................................................................................34

Connectable Equipment and Input Terminals........................................................................... 34

Connecting the Projector to the Computer ...............................................................................35

■ Connecting to RGB Monitor Output Terminal (analog connection).................................35

■ Connecting to DVI Monitor Output Terminal (digital connection)....................................36

■ Outputting Audio to Speakers .........................................................................................37

Connecting to AV Equipment.................................................................................................... 38

■ Connecting to Digital Video Output Terminal (digital connection)..................................38

■ Connecting to Analog Video Output Terminal (analog connection)................................39

■ Outputting Audio to Speakers .........................................................................................41

Table of Contents

6

Starting Projection..................................................................................................... 42

■ When the Language Selection Screen Appears............................................................. 43

■ When the Password Input Screen Appears.................................................................... 44

■ When "No signal" Appears .............................................................................................. 44

■ When Notebook Computer Screen Does Not Appear .................................................... 44

■ Adjusting Image.............................................................................................................. 44

Changing Notebook Computer Screen Output......................................................................... 44

■ Turning On External Monitor Output ............................................................................... 44

Setting Up the Screen Automatically ....................................................................... 45

Auto Setup................................................................................................................................ 45

■ Performing the Auto Setup.............................................................................................. 46

Selecting an Input Signal (INPUT) ............................................................................ 47

■ Types of Input Signals .................................................................................................... 47

■ Selecting an Input Signal................................................................................................ 48

Adjusting Image ......................................................................................................... 49

Setting the Display Resolution of the Computer....................................................................... 49

■ Windows Vista................................................................................................................. 49

■ Windows XP .................................................................................................................... 49

■ Macintosh OSX ............................................................................................................... 49

AUTO PC ................................................................................................................................. 50

■ Performing the Auto PC Function.................................................................................... 50

Adjusting the Image Size.......................................................................................................... 51

Adjusting the Focus.................................................................................................................. 52

■ Auto focusing.................................................................................................................. 52

■ Manual focusing.............................................................................................................. 52

Adjusting Keystone Distortion .................................................................................................. 53

■ Auto adjustment.............................................................................................................. 53

■ Manual adjustment.......................................................................................................... 53

■ Resetting the Keystone Adjustment................................................................................ 54

Selecting Screen Aspect and Aspect....................................................................... 55

Selecting Screen Aspect .......................................................................................................... 55

■ Moving Image with 16:9 D. Image Shift .......................................................................... 57

■ Moving Image with 4:3 D. Image Shift ............................................................................ 58

■ Resetting the Image Shift................................................................................................ 58

Selecting Aspect Ratio ............................................................................................................. 59

■ Types of Aspect Ratios................................................................................................... 59

■ How to Select an Aspect Ratio ....................................................................................... 60

Selecting an Image Mode .......................................................................................... 61

■ Image modes.................................................................................................................. 61

■ How to Select an Image Mode........................................................................................ 61

Turning Off the Projector .......................................................................................... 62

Useful Functions Available During a Presentation ....................................... 63

Useful Functions Available During a Presentation................................................. 64

Blackened Out an Image Temporarily...................................................................................... 64

Freezing the Picture ................................................................................................................. 64

7

Table of Contents

Adjusting the Volume................................................................................................................65

Muting the Sound...................................................................................................................... 65

Zooming an Image....................................................................................................................66

Showing the Elapsed Time ....................................................................................................... 67

Setting Functions from Menus........................................................................ 69

How to Use Menus .....................................................................................................70

■ Menu Configuration .........................................................................................................70

■ Basic Operation of Menu.................................................................................................71

Setting Display Status ...............................................................................................73

Selecting an Image Projection Mode ........................................................................................ 73

Selecting an Input Signal Type (ANALOG PC)......................................................................... 74

Selecting an Input Signal Type (VIDEO) .................................................................................. 74

Selecting an Input Signal Type (COMPONENT) ......................................................................75

Adjusting Input Signal (ANALOG PC) – Total Dots .................................................................. 75

Adjusting Input Signal (ANALOG PC) – Tracking ..................................................................... 76

Adjust Input Signal (ANALOG PC) – Horizontal position.......................................................... 76

Adjust Input Signal (ANALOG PC) – Vertical position .............................................................. 77

Adjust Input Signal (ANALOG PC) – Horizontal pixels ............................................................. 77

Adjust Input Signal (ANALOG PC) – Vertical pixels .................................................................78

Selecting HDMI Input Level ......................................................................................................78

Select HDMI Over Scan............................................................................................................ 79

Performing Progressive Processing ......................................................................................... 79

Selecting a Menu Position ........................................................................................................ 80

Correcting the Screen Color .....................................................................................................80

Reversing projection ................................................................................................................. 81

Capturing a Logo ...................................................................................................................... 82

Selecting the User Logo Display Position................................................................................. 82

No Signal Screen...................................................................................................................... 83

Screen When Blank .................................................................................................................. 83

Selecting a Logo at Startup ...................................................................................................... 84

Selecting Aspect Ratio of Screen ............................................................................................. 84

Setting the Image Quality ..........................................................................................85

Selecting an Image Quality ....................................................................................................... 85

Adjusting the Brightness ...........................................................................................................86

Adjusting the Contrast .............................................................................................................. 86

Adjusting the Sharpness...........................................................................................................87

Making a Gamma Correction .................................................................................................... 87

Making Color Adjustment (HDMI/DIGITAL PC/ANALOG PC) .................................................. 88

Making Color Adjustment (COMPONENT/VIDEO)................................................................... 88

Making Advanced Adjustment (Noise reduction)...................................................................... 89

Making Advanced Adjustment (Dynamic gamma) .................................................................... 89

Making Advanced Adjustment (Auto fleshtone)........................................................................ 90

Table of Contents

8

Adjusting Fine Color Adjustment (6-axis color adjust).............................................................. 90

Reducing the Lamp Brightness ................................................................................................ 91

Resetting the Image Settings ................................................................................................... 91

Setting Various Function........................................................................................... 92

Setting Auto Setup Function.....................................................................................................92

Selecting the Power Management Mode ................................................................................. 92

Skip the POWER Button Operation.......................................................................................... 93

Enabling/Disabling the Beep .................................................................................................... 93

Prohibiting the Projector Operation .......................................................................................... 94

Setting up the Remote Control Channel .................................................................................. 94

Selecting a Display Language.................................................................................................. 95

Showing/hiding the Guide Screen ............................................................................................ 95

Turning on/off LED Illumination ................................................................................................ 96

Extending the Menu Display Time............................................................................................ 96

Setting a Password .................................................................................................................. 97

Registering a Password ........................................................................................................... 97

Resetting the Lamp Counter .................................................................................................... 98

■ About the Display of the Lamp Counter.......................................................................... 98

Turning On/Off the Network Function....................................................................................... 99

Initializing network settings..................................................................................................... 100

Resetting to the Default Setting.............................................................................................. 100

Checking the Information of the Projector ............................................................ 101

Connecting the Projector to Network........................................................... 103

Setting an IP Address.............................................................................................. 104

■ Setting IP Address of the Computer ............................................................................. 104

■ Resetting the IP Address Setting of the Computer....................................................... 105

Setting Network........................................................................................................ 106

■ Displaying the Network Configuration Screen.............................................................. 106

■ Setting the Network....................................................................................................... 107

■ Resetting the Network Setting....................................................................................... 112

■ Error Notification Message............................................................................................ 113

■ Projector Control ........................................................................................................... 114

Appendix......................................................................................................... 115

Troubleshooting....................................................................................................... 116

WARNING Lamp Flash Patterns............................................................................................ 116

Symptoms and Solutions........................................................................................................ 117

■ You cannot turn on the projector. ................................................................................. 117

■ You cannot project an image from the projector. ......................................................... 117

■ You cannot hear sound................................................................................................. 118

■ The projected image is blur.......................................................................................... 119

■ You cannot project an image appropriately. ................................................................ 119

■ The projector is forced to be turned off. ....................................................................... 119

■ You cannot operate the remote control. ....................................................................... 120

9

Table of Contents

Maintenance..............................................................................................................121

Cleaning the Projector ............................................................................................................ 121

Cleaning and Replacing the Air Filter ..................................................................................... 122

■ Cleaning the Air Filter ....................................................................................................122

■ Replacing the Air Filter .................................................................................................. 122

Replacing the Lamp................................................................................................................ 123

■ About the Replacing Lamp............................................................................................123

■ Replacing the Lamp ......................................................................................................124

Relationship between Aspect and Screen Aspect................................................125

When Projecting an Image from a Computer .........................................................................125

When Projecting an Image from Image Software ................................................................... 127

Supported Computer Signal Types ........................................................................128

Relationship between Screen Size and Projecting Distance ...............................129

Glossary....................................................................................................................130

Specifications...........................................................................................................134

■ Projector ........................................................................................................................134

■ Remote Control..............................................................................................................134

■ External View .................................................................................................................135

■ ANALOG PC-2/COMPONENT IN terminal.....................................................................135

■ Service Port (CONTROL)...............................................................................................136

Index ..........................................................................................................................137

Menu Configuration .................................................................................................142

10

Safety Instructions

Before operating this projector, read this manual thoroughly in order to operate the

projector properly.

This projector offers many convenient features and functions. Operating the projector

properly enables you to manage those features and maintain it in good condition for a

long period.

Improper operation may result in not only reducing the product-life, but also malfunctions,

fire hazards, or other accidents.

If your projector is not operating correctly, read this manual again, check operations and

cable connections, and try the solutions shown in the "Troubleshooting" section at the end

of this booklet. If the problem still persists, contact the service center or the dealer where

you purchased the projector.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). THERE ARE NO USER-SERVICEABLE PARTS

INSIDE EXCEPT LAMPS. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE

CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN

THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING

AND MAINTENANCE INSTRUCTIONS FOR THIS UNIT IN THE

OWNER'S MANUAL.

CAUTION

Not for use in a computer room as defined in the Standard for the Protection of Electronic

Computer/Data Processing Equipment, ANSI/NFPA 75.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

11

Safety Instructions

Safety Precautions

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

• This projector projects intense light from the projection lens. Do not stare directly into

the lens if possible, as doing so may result in eye damage. Be especially careful that

children do not stare directly into the beam.

• Install the projector in an appropriate position.

Installing the projector in an inappropriate position may result in a fire hazard.

• Allow for appropriate space above beside and behind of the projector cabinet for

allowing air circulation and cooling of the projector. Minimum clearances must be

maintained. If the projector is to be built into a compartment or similarly space, the

minimum distances must be maintained. Do not cover the ventilation slot on the

projector. Heat build-up can reduce the service life of your projector, and can also be

dangerous.

• Do not put any flammable objects or spray cans near the projector, as the hot air

exhausted from the ventilation holes may result in an explosion.

• If the projector is not to be used for an extended period of time, unplug it from the

power outlet.

SIDE and TOP REAR

1 m (3.3') 1 m (3.3') 1 m (3.3')

1 m (3.3')

Safety Instructions

12

■ READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE.

All the safety and operating instructions should be read before beginning to operate the

product.

Read all of the instructions given here and retain them for later use. Unplug this projector

from the AC power supply before cleaning. Do not use liquid or aerosol cleaners on the

projector. Use a damp cloth for cleaning.

Follow all warnings and instructions marked on the projector.

For added protection of the projector during a lightning storm, or when it is left

unattended or unused for long periods of time, unplug it from the wall outlet. This will

prevent damage due to lightning and power surges.

Do not expose this unit to rain or use near water... for example, in a wet basement, near a

swimming pool, etc...

Do not use attachments not recommended by the manufacturer as they may result in

hazards.

Do not place this projector on an unstable cart, stand, or table. The projector may fall,

causing serious injury to a child or adult, and serious damage to the projector. Use only

with a cart or stand recommended by the manufacturer, or sold with the projector. Wall or

shelf mounting should be carried out in accordance with the manufacturer's directions,

and should use a mounting kit approved by the manufacturers.

An appliance and cart combination should be moved with care.

Sudden stops, excessive force, and uneven surfaces may cause the

appliance and cart combination to overturn.

Slots and openings in the back and bottom of the cabinet are provided

for ventilation, to insure reliable operation of the equipment and to

protect it from overheating.

The openings should never be covered with cloth or other materials, and the bottom

opening should not be blocked by placing the projector on a bed, sofa, rug, or other

similar surface. This projector should never be placed near or over a radiator or heat

register.

This projector should not be placed in a built-in installation such as a book case unless

proper ventilation is provided.

13

Safety Instructions

Never push objects of any kind into this projector through cabinet slots as they may touch

dangerous voltage points or short out parts that could result in a fire or electric shock.

Never spill liquid of any kind onto the projector.

Do not install the projector near the ventilation duct of air-conditioning equipment.

This projector should be operated using only the type of power source indicated on the

marking label. If you are not sure of the type of power supplied, consult your authorized

dealer or local power company.

Do not overload wall outlets and extension cords as this can result in fire or electric shock.

Do not allow anything to rest on the power cord. Do not locate this projector where the

cord may be damaged by people walking on it.

Do not attempt to service this projector yourself as opening or removing covers may

expose you to dangerous voltages or other hazards. Refer all servicing to qualified

service personnel.

Unplug this projector from the wall outlet and refer servicing to qualified service

personnel under the following conditions:

a. When the power cord or plug is damaged or frayed.

b. If liquid has been spilled into the projector.

c. If the projector has been exposed to rain or water.

d. If the projector does not operate normally after following the operating instructions.

Adjust only those controls that are covered in the operating instructions as improper

adjustment of other controls may result in damage and will often require extensive

work by a qualified technician to restore the projector to normal operating condition.

e. If the projector has been dropped or the cabinet has been damaged.

f. When the projector exhibits a distinct change in performance-this indicates a need

for servicing.

When replacement parts are required, be sure the service technician uses replacement

parts specified by the manufacturer that have the same characteristics as the original

parts. Unauthorized substitutions may result in fire, electric shock, or injury.

Upon completion of any service or repairs to this projector, ask the service technician to

perform routine safety checks to determine that the projector is in safe operating

condition.

Safety Instructions

14

AC Power Cord Requirement

The AC Power Cord supplied with this projector meets the requirements for use in the

country you purchased it.

THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND

EASILY ACCESSIBLE.

AC Power Cord for the United States and Canada:

The AC Power Cord used in the United States and Canada is

listed by the Underwriters Laboratories (UL) and certified by the

Canadian Standard Association (CSA).

The AC Power Cord has a grounding-type AC line plug. This is

a safety feature to ensure the plug fits into the power outlet. Do

not try to tamper with this safety feature. Should you be unable

to insert the plug into the outlet, contact your electrician.

NOTE FOR CUSTOMERS IN THE US

LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED

OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS.

European Union (and EEA) only.

These symbols indicate that this product is not to be disposed of with

your household waste, according to the WEEE Directive (2002/96/EC),

the Battery Directive (2006/66/EC) and/or your national laws

implementing those Directives. If a chemical symbol is printed beneath

the symbol shown above, in accordance with the Battery Directive, this

indicates that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb =

Lead) is present in this battery or accumulator at a concentration above

an applicable threshold specified in the Battery Directive. This product

should be handed over to a designated collection point, e.g., on an

authorized one-for-one basis when you buy a new similar product or to

an authorized collection site for recycling waste electrical and

electronic equipment (EEE) and batteries and accumulators. Improper

handling of this type of waste could have a possible impact on the

environment and human health due to potentially hazardous

substances that are generally associated with EEE. Your cooperation in

the correct disposal of this product will contribute to the effective usage

of natural resources. For more information about the recycling of this

product, please contact your local city office, waste authority, approved

scheme or your household waste disposal service or visit

www.canon-europe.com/environment.

(EEA: Norway, Iceland and Liechtenstein)

Ground

15

Safety Instructions

Federal Communication Commission Notice

Multimedia Projector, Model: WUX10

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The cable with a ferrite core provided with the projector must be used with this

equipment in order to comply with Class B limits in Subpart B of Part 15 of the FCC

rules.

Use of a shielded cable is required to comply with class B limits in Subpart B of Part 15

of FCC Rules.

Do not make any changes or modifications to the equipment unless otherwise specified

in the instructions. If such changes or modifications should be made, you could be

required to stop operation of the equipment.

Canon U.S.A., Inc.

One Canon Plaza, Lake Success, NY 11042, U.S.A.

Tel No. (516) 328-5600

Canadian Radio Interference Regulations

This Class B digital apparatus complies with Canadian ICES-003.

Safety Instructions

16

Precautions on Handling the Batteries in the Remote Controller

Lamp Handling Precautions

This projector uses a high-pressure mercury lamp which must be handled carefully and

correctly as mentioned below.

The mercury lamp has the following characteristics.

• A lamp may explode with a loud sound or burn out due to a shock, scratch, or use

beyond its expiry date.

• The lamp life may differ from lamp to lamp and according to the usage environment.

There is no guarantee that all lamps will last for the same period of time. Some lamps

may fail in a shorter period of time than other similar lamps.

• A lamp gradually becomes darker over time.

Observe the following precautions when handling the batteries. Failure to do so

may cause explosion, heat generation, fire, or leakage of the battery fluid.

• Do not heat or disassemble the batteries, or throw them into fire.

• Do not attempt to recharge the batteries.

Observe the following precautions when handling the batteries. Failure to do so

may cause explosion, heat generation, fire or leakage of the battery fluid.

• Remove the batteries when they have been exhausted or not in use for an

extended period of time.

• Be sure to replace both batteries at the same time. Do not mix batteries of

different types.

• Insert batteries correctly according to the "+" and "–" markings.

• If a fluid from a battery leaks and comes in contact with your skin, rinse the

affected skin thoroughly as soon as possible.

If a Lamp Explodes

• If a lamp explodes, gas or dust may come out of the exhaust vent. Open win-

dows and doors for ventilation.

• The gas contains toxic mercury. Always keep your face away from the

exhaust vent when the projector is operating to avoid inhaling mercury

vapors or to prevent it from getting in your eyes or mouth.

• If you inhale the gas or the shards of the broken lamp contact your eyes or

mouth, consult a doctor immediately.

• If a lamp explodes, its shards may scatter inside the projector. Ask the

Canon service representative to clean and check the inside of the projector

and replace the lamp.

If the projector indicates that the lamp should be replaced (i.e., the LAMP

REPLACE indicator lights up twice),

• The chances of an explosion increase. Replace the lamp with a new one

immediately if such is the case.

Caution

Warning

Caution

17

Safety Instructions

Carrying/Transporting the Projector

Installation Precautions

Disposal of Waste Lamp

• Dispose of the projector's mercury lamp according to local regulations just

like the fluorescent lamps.

• This projector is a precision machine. Do not subject the projector to strong

shocks or vibrations or turn it down.

• Install the lens cap to protect the lens and put the projector in the carrying

bag to protect it from dust and scratches on the surface of it when you carry

the projector. For details, see P21.

• Wait until the cooling fan stops before putting the projector in the carrying

bag. Do not put the projector in the carrying bag until the cooling fan stops

rotating. The projector may be damaged due to the heat.

• Replace the adjustable foot before putting the projector in the carrying bag.

The projector may be damaged if you put it in the bag without replacing the

adjustable foot.

• The carrying bag is not designed to protect the projector from external

shocks. When carrying the projector with it put in the carrying bag, do not

give a shock to it, drop it, or place anything on it. The projector may be dam-

aged or malfunctioned.

• Do not transport the projector through a courier or transport service with the

carrying bag. Put the projector in an impact-resistant transport case if such

is the case.

The area around the exhaust vent and the cabinet above the exhaust vent

become hot when the projector is operating.

• Do not touch these areas, or you may get burnt. In particular, keep children

away from these areas. Do not put anything that may deform or discolor due

to heat on the projector.

Hot air is exhausted from the exhaust vent. Observe the following:

• Do not put any metallic object on the projector. It

may become hot, resulting in accident or injury.

• Do not put anything such as a plant pot near the

exhaust vent.

• Do not put anything near the exhaust vent that

may deform or deteriorate due to heat.

• Do not seat anyone near the exhaust vent.

Caution

Hot air

Safety Instructions

18

When placing the projector on a castered stand or table, be sure to lock the

casters.

• Failure to do so may cause the projector to move or topple, resulting in an

injury.

Position the projector in a horizontal position.

• Install the projector correctly. Incorrect

installation may cause troubles and acci-

dents.

• Do not tilt the projector more than 20

degrees above and below the horizontal.

• When you want to use your projector point-

ing up or down, make sure to place the projector straight up or down.

• Do not install the projector vertically.

Do Not Use in the Following Environments

• Do not place the projector on an unstable or slanted surface. The projector

may fall causing a personal injury.

• Do not place it in an oily, smoky, or damp location (e.g., near a cooking table

or a humidifier). It may cause a fire or an electric shock.

• Do not place it near an exhaust outlet of air-conditioning equipment.

Do not install the projector in a humid or dusty location or a position where

there is a lot of oily or cigarette smoke. Optical parts such as a lens and mirror

may be stained, resulting in poor picture quality.

If the projector is carried from a cold place to a warm place or the room tem-

perature is raised rapidly, condensation may form on the lens and mirror due to

the moisture in the atmosphere, resulting in a blurred picture. Wait until con-

densation evaporates and normal picture is shown.

Do not use the projector in a place subject to either very high or very low tem-

peratures. Doing so may cause malfunction. The ranges of the operating and

storage temperatures are as shown below:

Operating temperature: +5°C to +35°C (Humidity: 85% or below)

Storage temperature: -10°C to +60°C (Humidity: 90% or below)

Using the Projector at 2300 Meters or More Above Sea Level

• If you use the projector at 2300 meters or more above sea level, the special

configuration is required to cool down the projector properly. Contact your

dealer.

Caution

20°

19

Table of Contents

Safety Instructions

Before Use

Projecting an Image

Useful Functions Available During a Presentation

Setting Up Functions from Menus

Connecting the Projector to Network

Appendix

Index

Before Use

20

Supplied Accessories

Check whether the following accessories are supplied with the projector.

■ Installing the Lens Cap

As shown in the illustration on the right, put the lens cap

strap through the hole on the lens cap, and then through

the lens cap strap insertion hole at the bottom of the pro-

jector.

• When the projector is not in use, attach the lens cap to

protect the lens.

z Remote control z Batteries (type AAA, two)

for remote control

z Computer connection cable

(DVI/Mini D-sub, 15-pin) (1.8 m/5.9')

z Power cord (2 m/6.6') z Component cable

(RCA/Mini D-sub, 15-pin)

(0.4 m/1.3')

z Lens cap

z Lens cap strap z Carrying bag

z User's Manual (CD-ROM)

z Warranty card

z Important Infomation and

Quick Start Guide

For the U.S.A and Canada

For Continental Europe

Page is loading ...

Canon REALiS WUX10 User manual

This manual is also suitable for

Canon REALiS WUX10 User manual

Related papers

Other documents