1
n OVERVIEW
The FTP-627 MCL Series are 24V driven high-speed printers
with a 2-inch paper width equivalent.
The FTP-627 MCL Series can be used for a variety of
applications, such as CAT/EFT, POS, banking terminals, and
measurement and medical equipment.
n HIGHLIGHTS
• Ultra compact
Height 15.5 mm, width 83.5 mm, depth 35.7 mm
• High speed printing
It can print at 100 mm/s (800 dotlines/s) maximum by using
Fujitsu's unique head drive control.
• Two types of paper routes
Front or bottom feed.
• Easy paper setting
Our unique platen release mechanism allows a
wide paper route even if the printer is ultra-compact, so
paper can be easily inserted. Conventional auto loading is
also available.
FTP-627MCL053/054
24V DRIVEN, FTP-607 Series
2” HIGH SPEED THERMAL PRINTER
FTP-627MCL053/054
FTP-627DSL238
2
FTP-627MCL053/054
n PART NUMBERS
n SPECIFICATIONS
Part number FTP-627MCL053/054
Printing method Thermal-line dot method
Dot structure 384 dots/line
Dot pitch (Horizontal) 0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical) 0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area 48 mm
Number of columns ANK 32 columns/line (maximum 12 x 24 dot font)
Paper width 58 mm
Paper thickness 60 to 100 µ m (some paper in this range may not be used because of
paper characteristics)
Printing Speed Maximum 100mm/sec. (800 dot line/sec.)
Alphanumeric, kana: 159 types
International characters: 195 types
JIS Kanji (Kanji CG loaded board): about 6800 types
12 × 24 dots, (1.5 × 3.0 mm), 32 columns: ANK
24 × 24 dots, (3.0 × 3.0 mm), 16 columns: ANK
8 × 16 dots, (1.0 × 2.0 mm), 48 columns: ANK
16 × 16 dots, (2.0 × 2.0 mm), 24 columns: ANK
SpecicationsItem
Character types
Character, dimensions (W×H), number of
columns
metI srebmuNtraP
rettuChtiwmsinahcemretnirP
)noitresnirepaptnorf(350LCM726-PTF
)noitresnirepapmottob(453LCM726-PTF
gnivirdrofISL )ylnoKNA(102UC726-PTF
draoBecafretnI
lellaraP )scinortneC(812LCD726-PTF
laireS )C232SR(832LSD726-PTF
ecafretnI
selbac
lellaraP 202Y826-PTF
laireS 203Y826-PTF
elbacrewoP
cigoL 104Y926-PTF
rotom,daeH 106Y926-PTF
3
FTP-627MCL053/054
n SPECIFICATIONS
*+5˚C to +40˚C printing density assurance rance.
metI
noitacificepS
350LCM826-PTF 450LCM826-PTF
ecafretnI scinortneC/C232SRotsmrofnoC
rewoP
ylppus
daehtnirproF
)kaepA2.2(A5.1,tnerrucegarevaCDV42
).ces/mm001:deepstnirp,%52:oitartnirp(
rotomroF mumixamA1,%5±CDV42
cigolroF mumixamA1.0,%5±CDV5
snoisnemiD
)HxDxW(
msinahceM mm5.51x7.53x5.38 mm5.51x3.43x3.27
draobecafretnI mm42x06x07
thgieW
msinahceM g94yletamixorppA g74yletamixorppA
draobecafretnI g52yletamixorppA
efiL
daeH
dradnatsruorednu(tod/seslupnoillim05:ecnatsiseresluP
mk05ecnatsidgnilevartrepap:ecnatsisernoisarbA;)snoitidnoc
)sselro%52:oitartnirp(
gnitarepO
tnemnorivne
*erutarepmetgnitarepO C˚05otC˚0
ytidimuhgnitarepO )noitasnednocon(HR%58ot02
erutarepmetegarotS )dedulcnitonrepap(C˚06+otC˚02-
ytidimuhegarotS )noitasnednocon(HR%59ot5
noitceteD
noitcnuf
erutarepmetdaeH
noitceted
rotsimrehtybdetceteD
noitcetedkram/tuorepaP retpurretni-otohpybdetceteD
esaelernetalP hctiwsgnidilsybdetceteD
repapevitisneslamrehtdednemmoceR
repaPevitisneShgiH )repaPnoppiN(4E-SK05FT
:repapdradnatS ,)repaPnoppiN(E-SK06FT
R501DP,)mm85(100UP020-PTF
)mm85(1070P020-PTF,)repaPijO(
repaPefiLmuideM 2010P020-PTF,1F-SK06FT
,)repaPijO(R071DP,)mm85(
)repaPihsibustiM1-BBV022P
repaPefiLgnoL ,)repaPijO(N-R061DP
,)repaPihsibustiM(532-BFA
,)repaPnoppiN(R-JK05PT
)repaPnoppiN(AA022AH
4
FTP-627MCL053/054
n FUNCTION OF INTERFACE BOARD
n DIMENSIONS
1. Printer mechanism
Unit: mm
Note: 1. Dimensions are nominal value (tolerance ±5 unless otherwise specied).
2. Platen unit (lever, platen, etc) moves by approximately 0.7mm toward paper insertion direction when platen is
open.
FTP-627MCL054FTP-627MCL053
metI metI
.1 noitcnuftnirptseT .8 noitcnufgnivasrewoprotoM
.2 noitcetedtuorepaP .9 noitcnufnoitcetedkraM
.3 noitceteddneraenrepaP .01 noitcetedytilamronbanoitarepoUCM
.4 noitcetedneponetalP .11 noitcetorpecneuqesFFO/NOrewoP
.5 noitcetedytilamronbaerutarepmetdaehlamrehT .21 noitcetorptnerruc-revorotoM
.6 noitcetedesuftuo-wolB .31 remiterawdraH
.7 noitcetedytilamronbaegatlovdaeH
5
FTP-627MCL053/054
2. Interface board
Unit: mm
70.0
63.5
51.0
35.5
17.5
60.0
53.5
3.3
21.8
3.3
3.3
41.0
42.0
16.0
CN 8
CN 1
CN 2
CN 6
CN 7
CN 5
CN 3
1
30
1
2
1
2
29
30
1
8
1
3
1
6
1
4
3.3
6.
5
(FG)
4-
3.
2
6
FTP-627MCL053/054
1. Connector (FPC) specication (CN3)
(1) Connector
Mechanical unit side: FPC connector
Remote side (housing site): 52610-3090 (made by Molex)
(2) Pin assignment on the mechanical side
oN
langiS O/I stnetnoC
1 KHP — )edohtaC(retpurretniotohP
2 NESV — rosnesrepaprofylppusrewopdnuorG
3 EHP O )rottimE(retpurretniotohP
4 WS — hctiwsneponetalP
5 WS O hctiwsneponetalP
6 HV —
daehlamrehtrofylppusrewoP7 HV —
8 HV —
9 ID I niatadtnirP
01 3BTS I 3ebortS
11 DDV — cigolrofrewoP
21 HT O rotsimrehT
31 DNG —
daehlamrehtrofylppusrewopdnuorG
41 DNG —
51 DNG —
61 DNG —
71 DNG —
81 DNG —
91 1BTS I 1ebortS
02 2BTS I 2ebortS
12 TAL I hctalatadtnirP
22 KLC I kcolC
32 CN — detcennoctoN
42 HV —
daehlamrehtrofylppusrewoP52 HV —
62 HV —
72 A/TM I
langisnoitaticxerotomgnippetS
82 A/TM I
92 B/TM I
03 B/TM I
7
FTP-627MCL053/054
Fujitsu Components International Headquarter Ofces
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://www.fujitsu.com/us/services/edevices/components/
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: http://www.fujitsu.com/emea/services/components/
Asia Pacic
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#04-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
Web: http://www.fujitsu.com/sg/services/micro/components/
©2006 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property off their respective
owners.
Fujitsu Components America does not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu
Components America, Inc. reserves the right to change specications/datasheets without prior notice. Rev. 01/26/2006.
Platen unit
Thermal head
Motor
Sensor (Photo-
interruptor)
30,29, .....................2,1
Connector No
(FPC pin numbers)
FPC
Connect terminal:
surface side
/