Bauknecht EKD 5470 IN Program Chart

Brand: Bauknecht

Model: EKD 5470 IN

Type: Program Chart

EKD 5470 Product description sheet

DE AT FR NL IT SE NO FI DK

5019 419 61101/C

Important:

To avoid permanently damaging the glass-ceramic top, do not use:

- Pots with bottoms that are not perfectly flat.

- Metal pots with enamelled bottom.

Dimensions of cooking hob and worktop

Innovative features of the hob

The

DISPLAY

shows at a glance the chosen power setting and, if applicable, the chosen function.

After turning any of the knobs, the

PAN DETECTION

feature turns on the respective heating zone automatically as soon as a

metallic cooking utensil of appropriate size is placed onto that heating zone.

The utensil has to cover at least 50% of the outer heating zone rim for the automatic pan detection to be activated (see sketch).

On removing the pan from the heating zone, the latter is turned off automatically by the pan detection feature. After the pan has

been removed from the heating zone, the pan detection feature automatically switches the zone into “standby” mode for one

minute, i.e. if the pan is placed back onto the heating zone within one minute, pan detection switches back on again

automatically. If the pan is kept away from the heating zone for longer than one minute, the heating zone is turned off

automatically and the knob has to be turned back to the “0” position again in order to reactivate this function.

Pan detection can be turned off for non-metallic cooking utensils. In this case the respective heating zone works just like a normal

heating zone without pan detection.

When finished cooking turn all the knobs back to the "0" position.

The

ELECTRONIC CONTROL

keeps variations in heating zone temperature to a minimum thus ensuring uniform cooking at all

times.

The

BOIL DRY FUNCTION

detects abnormal situations such as when the pan has boiled dry and turns the respective heating zone

off automatically.

The

DIAGNOSTIC SYSTEM

continually checks that the hob is working properly and indicates if there is a fault.

Display description

The displays on the hob correspond to the chosen control knob settings and selections, which are listed in the hob’s

instruction booklet and depend on the features included in the particular version of the hob.

Dual ring function

Pan detection

turned off

Turbo heat Auto fast boil

Gentle heat

Keep hot function

Alphanumeric DISPLAY

Ideal

Max. 50%

No detection No detection

1. Halogen heating zone (Lightronic Sense) Ø 145, 1200 W

2. Halogen heating zone (Lightronic Sense) Ø 210, 2200 W

3. Halogen heating zone (Lightronic Sense) Ø 145, 1200 W

4. Halogen heating zone (Lightronic Sense) Ø 180, 1800 W

5. Display

Possible user messages

Flashing indicator lamp:

Special feature selected.

Indicator lamp on continuously:

Special feature active.

“U that moves up and down”:

When pan detection is

active this display indicates either that there is no cooking

utensil placed on the heating zone or the utensil is not

positioned properly.

With “U at a standstill” the heating zone has been turned off

by pan detection and the knob has to be turned back to the

“0” position to activate the zone again.

Heat level indicator:

Each digit (from 1 to 10) corresponds to

a power setting selected via the control knob. If the display

digit flashes, boil dry detection is active.

Fine adjustment of the heat setting:

An additional intermediate heat setting (1.5)

can be selected between control knob settings 1 and 2.

Turbo heat:

The booster function is turned on for fast boiling.

Hob still hot warning:

The hot hob warning (“H”) stays on after the heating zone

has been turned off until the temperature has fallen to a safe level.

If any display readout shows an “F” message, please get in touch with after-sales service.

Using the hob

Whilst using the hob and/or the oven the cooling fan works continuously, adjusting its ventilation capacity according

to the heat setting selected.

After turning the hob and/or oven off, the cooling fan may continue running for a while in order to cool down the

appliances and adjacent kitchen fixtures.

“Turning pan detection on and off”

With this hob, pan detection is usually activated after turning on, although it can still be switched off manually if necessary.

Turning it off:

1. Turn the control knob for the relevant heating zone to the Gentle Heat function .

2. The function indicator lamp starts flashing.

3. Turn the control knob back to “0”, the function indicator lamp now stays on permanently. Now, within 5 seconds, turn the

control knob to the desired heat setting or function.

Turning it on:

1. To turn pan detection back on again, turn the control knob to the “0” position. After around 5-7 seconds pan detection is

activated once again automatically, the function indicator then goes off.

Please note:

The turning off or turning back on again, where necessary, has to be carried out for each separate heating zone.

• Turn the knob (for the cooking zone to be used) clockwise to the desired power level or to the symbol corresponding to

the function required.

• To turn the cooking zone off, turn the knob until the mark is at position “0”.

• The hob functions (e.g. Turbo heat) are explained in the separate product description for the hob.

Bauknecht EKD 5470 IN Program Chart

Bauknecht EKD 5470 IN Program Chart

Bauknecht EKD 5470 IN Program Chart

Related papers

Other documents