Step 1) Attach a connector (part A) to both sides of
a pole (part 2).
Step 2) Attach 2x pole (part 1) to the connectors
used in step 1 (see image to the right).
Step 3) Attach two (part 3) to the connector used in
step 1 and use a connector (part E) to join them
together.
Step 4) Repeat steps 1-3 again to create the opposite
side.
Step 5) Use a connector (part E), and poles (part 1),
to join the two pieces you have made together (see
image).
Step 6) Attach 2 curved poles (part 3) to the central
connector (part E) as done in previous steps.
Step 7) Use the remaining two poles (part 1) to piece
the top of the greenhouse together.
Step 8) Place cover over the frame ensuring it is
equal on both sides.