2. Industrial & lab equipment
  3. Electrical equipment & supplies
  4. Electrical controls
  5. Electrical timers
  6. meitav-tec
  7. ERT208

meitav-tec ERT208, ERT209 Owner's manual

  • Hello, I've reviewed the user manual for the ERT209 thermostat by Meitav-tec and can help you with questions about it. The manual details functions such as turning the device on or off, selecting different fan and operating modes, adjusting temperature, using the timer, and setting temperature limits for cooling and heating. Feel free to ask me anything!
  • How do I switch between fan modes?
    What modes can I select?
    How to set a timer?
File:ert209-operatingmanual.doc | June 11, 2007 | Rev. 2
Meitav-tec Ltd. (Contel group), 6 Sapir street, New Industrial Zone P.O.B 5221 Rishon-Lezion, 75150, Israel
Tel: +972-3-9626462, Fax: +972-3-9626620, Web: www.meitavtec.com, E-mail: support@meitavtec.com
ERT209
Operating manual
1. ON\OFF
Press the On/Off button to activate/deactivate the thermostat.
2. Fan ON / Auto Fan
Press the Fan button to switch between:
o Fan ON – the fan will work continuously - an arrow will
apear next to the words “Fan ON”.
o Auto Fan - The fan will stop when there is no
demand for cooling or heating - an arrow will apear
next to the words “A.Fan”.
3. Modes
Press the Mode button to switch between modes:
o Cool - an arrow will apear next to the word “Cool”.
o Heat - an arrow will apear next to the word “Heat”.
o Auto change-over
– The thermostat will
automatically switch between cooling and heating –
according to the current temperature and the requested
temperature - an arrow will apear next to the word “Auto”.
o Fan only – The arrows will disappear.
4. Adjust Temperature
Use the SET buttons (“+” or “-“) to change the requested temperature.
5. Timer
Use the timer to turn the thermostat On or Off (opposite to current status) after a set number of
hours (0-12 Hours).
Press the Timer button – an arrow will apear next to the word “Timer”.
Use the SET buttons (“+” or “-“) to adjust the number of hours.
Press the Timer button again to return to normal display mode.
* The timer function will be cancelled in case of power failiure.
6. Temperature Limits
Press and hold the Mode button until the set-point temperature limit for cooling will appear on
display. An arrow will appear next to the word “Cool”.
Use the SET buttons (“+” or “-“) to adjust the set-point temperature for cooling.
Press the Mode button again - an arrow will appear next to the word “Heat”.
Use the SET buttons (“+” or “-“) to adjust the set-point temperature for heating.
Press the Mode button again to return to normal display.
/