Lang LRO-2G User manual

Lang Manufacturing Company 6500 Merrill Creek Parkway Everett, WA 98203

Rev. C Phone: 425-349-2400 Fax: 425-349-2733

PROGRAMMING MANUAL

Model: LRO-1G,-2G,-1E, &-2E,

REV 24

2

CONTROL BOARD OVERVIEW

Auto

Preheat

Power

Vent

Program

Time

Temp

Select

Power Key

Press to turn oven

On/Off

Vent Key

Use to Manually

open and close

Vent

Time Key

Use enter time

in manual mode

or access time in

pre-programed recipes

Temperature Key

Use enter temperature

in manual mode

or access temperature in

pre-programed recipes

Auto Preheat

Set actual time

and time of day oven will

automatically turn on

Program Key

Use to enter events

in preprogramed recipes

Select Key Scroll Arrows

and

Use to select recipes

and

to move through the

programing events

Status Screen

Displays oven status and

recipe screens

Temperature LED

Displays current oven

temperature

Infrared Port

Use to “Beam” recipes

from PDA

Recipe Count Down LED

Displays time remaining

during bake cycle

Function Keys

Use to save, select and exit

while in programing mode

REV 24

3

OVEN PREHEAT

Auto

Preheat

Power

Vent

Program

Time

Temp

Select

Temp Low

300 F

74 F

Pre Heating

Support

A

uto

Preheat

Power

Vent

Program

Time

Temp

Select

Support

Oven

Ready

300 F

Select Product

Illustration 2 - Pre-heat Screen

Illustration 3 - Ready Screen

Current Oven Temperature

Oven Status Screen

Press the to turn the oven on. The will indicate that the oven is

heating to the pre-set temperature of 300 degrees F. (Illustration 2).and the

will show current oven temperature.

When the the oven has reached the 300 degree F pre-set the will flash

“Oven Ready” the will show current oven temperature (Illustration 3).

Power Key Status Screen

Temperature

LED

Status Screen

Temperature LED

REV 24

4

MANUAL PROGRAMMING INSTRUCTIONS

A

uto

Preheat

Power

Vent

Program

Time

Temp

Select

Back

Manual

Cook

Time 00:00

Temp 300 F

Manual

Auto

Preheat

Power

Vent

Program

Time

Tem p

Select

Back

Manual

Cook

Time 00:00

Temp 300 F

Manual

A

uto

Preheat

Auto

Preheat

Power

Vent

Program

Time

Tem p

Temp

Select

Back

Manual

Cook

Manual

Cook

Time 35:00

Temp 300 F

Time 35:30

Temp 300 F

Manual

Illustration 4 - Manual Mode

Press the up or down arrow keys

to adjust the minutes for the

desired cook time

Press the up arrow key

until the status

screen displays

Manual Cook

Press the Time Key:

The minutes

in the status screen will

be highlighted

Press the Time key, the seconds

will be highlighted.

Use the up and down arrow keys to

adjust the seconds

Illustration 5 - Select Minutes

Illustration 6 - Enter Minutes

Illustration 7 - Select and enter second

s

Step 1

Step 2

Step 3

Step 4

gg

REV 24

5

MANUAL PROGRAMMING INSTRUCTIONS

A

uto

Preheat

Power

Vent

Program

Time

Temp

Select

Back

Manual

Cook

Time 35:30

Temp 300 F

Manual

Press the Temp key

the temperature in the

status screen will be

highlighted

Auto

Preheat

Power

Vent

Program

Time

Temp

Select

Back

Manual

Cook

Time 35:30

Temp 300 F

Manual

Auto

Preheat

Power

Vent

Program

Time

Tem p

Select

Back

Manual

Cook

Time 35:30

Temp 350 F

Manual

Use the Up or Down

arrow keys to change

the temperature to the

desired cook temperature

Press the Temp Key

to exit the programming

mode, then press the

Select Key to begin

the Bake.

Illustration 8 - Select temperature

Illustration 9 - Enter temperature

Illustration 10 - Read

y

to start

Step 5

Step 6

A

uto

Preheat

Power

Vent

Program

Time

Temp

Select

Temp Low

350 F

300 F

Pre Heating

Start Recipe Exit

Step 7

If the oven temperature is

lower than the program

temperature, the status screen

will be as shown.

If the temperature is higher

the status screen will indicate

Temperature High

Open door to cool.

NOTE:

Press the arrow key

under the Start Recipe

to begin the bake.

Illustration 11 - Oven Read

y

Step 8

gg

REV 24

6

MANUAL PROGRAMMING INSTRUCTIONS

Auto

Preheat

Power

Vent

Program

Time

Tem p

Select

Cancel

Manual

Cook

Time 35:30

Temp 300 F

Baking

Press the Select Key

to Start the cook cycle

The larger timer LED will illuminate

and begin the count-down

The time will count down

at this display

and

at the status screen display

A

uto

Preheat

Power

Vent

Program

Time

Temp

Select

Silence + 1 Min

Manual

Cook

Bake Complete

When the bake is complete

there will be a repeated

“beeping”

The timer LED will Flash 00:00

The status screen will

indicate Bake Complete

To end the bake, press the

arrow key directly below the word

Silence on the status board

Or

See Step 10 B

If your product requires

additional time to

complete the bake

press the arrow key

directly under the + 1Min

at the status screen to add

one minute to the bake

A

uto

Preheat

Power

Vent

Program

Time

Temp

Select

Exit + 1 Min

Manual

Cook

Bake Complete

After pressing

silence, press the

arrow key directly

under Exit at the status

screen to

return to the

Oven Ready Mode

Illustration 12- Baking

Illustration 13- End of bake options Illustration 14 -End bake

Step 9

NOTE:

Step 10 A

Step 10 B

REV 24

7

RECIPE PROGRAMMING INSTRUCTIONS

The followin

g

instructions will

g

uide

y

ou throu

g

h addin

g

and editin

g

a pro

g

ram.

The recipes used in these instructions are examples only, these recipe may not

bake consistently to your standards.

Please use this recipe as an example only.

A

uto

Preheat

Auto

Preheat

Power

Vent

Program

Time

Tem p

Select

At this point there may or may not

be a Name or Icon already programed.

For this exercise we will assume there is none.

Recipe 01

Time 00:00

Temp 350 F

Back

Press the Program Key

The status screen will

display the events function.

Events

Ev Time F St Vt Bl

1 00:00 350 00 - -

2 00:00 350 00 - -

3 00:00 350 00 - -

4 00:00 350 00 - -

5 00:00 350 00 - -

Save

For each of the

(

36

)

thirt

y

six recipe items there are

(5) events that can be programed.

An event is a time driven function that the computer

controls.

Time, Temperature, Steam, Vent and Blower are

controlled in the events screen.

Illustration 15 - Programing Events

Step 1

Step 2

Press the up arrow key

directly above the

select key until the status screen

shows Recipe 01

Illustration 16 Event Screen

REV 24

8

RECIPE PROGRAMMING INSTRUCTIONS

A

uto

Preheat

Auto

Preheat

Auto

Preheat

Power

Vent

Program

Time

Tem p

Select

Events

Ev Time F St Vt Bl

1 00:00 350 00 - -

2 00:00 350 00 - -

3 00:00 350 00 - -

4 00:00 350 00 - -

5 00:00 350 00 - -

Save

Ev Time F St Vt Bl

1 00:05 350 00 - -

2 00:00 350 00 - -

3 00:00 350 00 - -

4 00:00 350 00 - -

5 00:00 350 00 - -

Save

Ev Time F St Vt Bl

1 00:05 350 00 - -

2 00:00 350 00 - -

3 00:00 350 00 - -

4 00:00 350 00 - -

5 00:00 350 00 - -

Save

In this example we will use the followin

g

recipe for French Bread.

Total bake time: 35:00

:05 seconds of steam at the start of the bake

Open the vent for 1 Minute ½ way through

the bake cycle.

Illustration 17 - Event 1

Illustration 18 - Enter Time

Illustration 19 - Enter Tem

p

erature

After pressing the programing key

the events screen is displayed, note that the

time has been highlighted in event #1.

Using the UP arrow key above the

Select Key, increase the time in

event one to read :05 or five seconds.

Press the up or down arrow keys

until the temperature reads

350

Press the Select Key

the Temperature will be highlighted

Once the temperature has been

changed to 350

press the Select Key

Step 3

Step 4

Step 5

Step 6

Sample Recipe

Page 7 Rev 24

REV 24

9

RECIPE PROGRAMMING INSTRUCTIONS

A

uto

Preheat

Auto

Preheat

Auto

Preheat

Power

Vent

Program

Time

Tem p

Select

Events

Ev Time F St Vt Bl

1 00:05 350 05 - -

2 00:00 350 00 - -

3 00:00 350 00 - -

4 00:00 350 00 - -

5 00:00 350 00 - -

Save

Ev Time F St Vt Bl

1 00:05 350 05 - -

2 00:00 350 00 - -

3 00:00 350 00 - -

4 00:00 350 00 - -

5 00:00 350 00 - -

Save

Ev Time F St Vt Bl

1 00:05 350 05 - -

2 17:30 350 00 - -

3 00:00 350 00 - -

4 00:00 350 00 - -

5 00:00 350 00 - -

Save

Illustration 20 - Event 1 Steam Time

Press the Up arrow key

until the St time reads

05, or five seconds

Step 7

Press the Select Key (3) times

until the Time in event #2 is

highlighted

Step 8

Illustration 21 - Event 2

Press the up arrow key

until the Time in

event # 2 reads 17:30

Step 9

Illustration 22 - Event 2- Time

Page 8 Rev 24

R

ec

i

pe

P

rogramm

i

ng

I

nstruct

i

ons

REV 24

10

RECIPE PROGRAMMING INSTRUCTIONS

A

uto

Preheat

Auto

Preheat

Auto

Preheat

Power

Vent

Program

Time

Te mp

Tem p

Te mp

Select

Events

Ev Time F St Vt Bl

1 00:05 350 05 - -

2 17:30 350 00 - -

3 00:00 350 00 - -

4 00:00 350 00 - -

5 00:00 350 00 - -

Save

Ev Time F St Vt Bl

1 00:05 350 05 - -

2 17:30 350 00 - -

3 00:00 350 00 - -

4 00:00 350 00 - -

5 00:00 350 00 - -

Save

Ev Time F St Vt Bl

1 00:05 350 05 - -

2 01:00 350 00 - -

3 01:00 350 00 - -

4 00:00 350 00 - -

5 00:00 350 00 - -

Save

Press the Select Key

and use the Select Up arrow

key to change the temperature

in event 2 to 350.

Illustration 23 - Event 2 Temperature

Press the Select Key

4-times until

the time is highlighted

in event 3

Step 10

Step 11

Illustration 24 - Event 3

Illustration 2

5

- Event

3

Time

Press the Up

Select arrow key

and enter 01: minutes

in event 3

Step 12

Page 9 Rev 24

R

ec

i

pe

P

rogramm

i

ng

I

nstruct

i

ons

REV 24

11

RECIPE PROGRAMMING INSTRUCTIONS

Auto

Preheat

Auto

Preheat

Power

Vent

Program

Time

Temp

Select

Events

Ev Time F St Vt Bl

1 00:05 350 05 - -

2 17:30 350 00 - -

3 01:00 350 00 - -

4 00:00 350 00 - -

5 00:00 350 00 - -

Save

Ev Time F St Vt Bl

1 00:05 350 05 - -

2 17:30 350 00 - -

3 01:00 350 00 - -

4 00:00 350 00 - -

5 00:00 350 00 - -

Save

Press the Select key

until the temperature

in event 3 is highlited

using the arrow keys

change the temperature to

350

Press the Select key

2 times until the

dash under Vt in event 3

is highlighted

Step 13

Step 14

Illustration 26 - Event 3 Temperature

Illustration 27 - Select Vent

REV 24

12

RECIPE PROGRAMMING INSTRUCTIONS

Auto

Preheat

Auto

Preheat

Auto

Preheat

Power

Vent

Program

Time

Te mp

Select

Events

Ev Time F St Vt Bl

1 00:05 350 05 - -

2 17:30 350 00 - -

3 01:00 350 00 o -

4 00:00 350 00 - -

5 00:00 350 00 - -

Save

Ev Time F St Vt Bl

1 00:05 350 05 - -

2 17:30 350 00 - -

3 01:00 350 00 o -

4 16:25 350 00 - -

5 00:00 350 00 - -

Save

Ev Time F St Vt Bl

1 00:05 350 05 - -

2 17:30 350 00 - -

3 01:00 350 00 o -

4 00:00 350 00 - -

5 00:00 350 00 - -

Save

Press the Up or Down

arrow key so that a “o”

is shown under Vt in

Event 3

Press the Select Key

until the time

in event 4 is highlited.

Use the up arrow key to

change the time to

16:25

Press the Select Key

until the temperature

in event 4 is highlited.

Use the up arrow key to

change the temperature to

350

Step 15

Illustration 28 - Open Vent

Step 16

Illustration 29 - Event 4 Time

Step 17

Illustration 30 - Event 4 Temperature

REV 24

13

RECIPE PROGRAMMING INSTRUCTIONS

Auto

Preheat

Power

Vent

Program

Time

Te mp

Select

Recipe 01

Time 35:00

Temp 350 F

Events

Icon Name

Illustration 32 - Recipe 01 Status Screen

Auto

Preheat

Power

Vent

Program

Time

Te mp

Select

Events

Ev Time F St Vt Bl

1 00:05 350 05 - -

2 17:25 350 00 o -

3 17:30 350 00 - -

4 00:00 350 00 - -

5 00:00 350 00 - -

Save

Illustration 31 - Save Events

Press the arrow key under the word Save

at the events screen

Step 18

The status screen should read as shown

.

The events time totaled to 35:00

The Temperature is 350 F

The word Events indicates that this recipe has

events programmed.

We will now choose an Icon that best depicts

French Bread.

REV 24

14

RECIPE PROGRAMMING INSTRUCTIONS

Auto

Preheat

Auto

Preheat

Power

Vent

Program

Time

Temp

Te mp

Select

Recipe 01

Time 35:00

Temp 350 F

Events

Time 35:00

Temp 350 F

Events

Icon Name

Press the arrow key under the

word Icon at the status screen

The Icon area will be highlighted

Step 19

Illustration 33 - Recipe Icon

Press the Up select arrow key until

your desired Icon is displayed

There is an option for a Blank space

or an “X”

Step 20

Illustration 34 - Select Icon

pg g

REV 24

15

RECIPE PROGRAMMING INSTRUCTIONS

Auto

Preheat

Auto

Preheat

Power

Vent

Program

Time

Temp

Select

Recipe 01

Time 35:00

Temp 350 F

Events

Time 35:00

Temp 350 F

Events

Icon Name

Press the arrow key under the

word Name at the status screen

A line will be illuminated just below

the Recipe 01 block at the status screen

Use the down arrow key

to select lower case letters

( the text string starts with the letter “z”)

and spell out the word

french, press select after each

letter to save..

french

The recipe name characters include all characters on a standard english key board, including a

blank space.

Programing a name is simplest if only the lower case is used, otherwise this process can be time

consuming.

Lang offers a PDA program that save valuable time when programing and make recipe changes

quick and easy, once the programs have been entered into the PDA they can be infrared beamed

directly into the Lang oven.

.

To order a PDA loaded with the Lang program please contact your local Distributor or contact Lang

Customer Care at 800-882-6368 and ask about the Lang PDA.

Step 21

Step 22

Illustration 35 - Select Name

Illustration 36 - Enter Name

Recipe Programming Instructions

REV 24

16

BLOWER DELAY & PULSE INSTRUCTIONS

Auto

Preheat

Auto

Preheat

Auto

Preheat

Power

Power Power

Vent

Vent Vent

Program

Program Program

Time

Time Time

Temp

Temp Temp

Select

Select Select

Events

Pulse Fan

Ev Time F St Vt Bl

1 10:00 450 00 - D

2 35:00 350 00 - -

3 00:00 350 00 - -

4 00:00 350 00 - -

5 00:00 350 00 - -

Save

Ev Time F St Vt Bl

1 60:00 450 00 - P

2 00:00 350 00 - -

3 00:00 350 00 - -

4 00:00 350 00 - -

5 00:00 350 00 - -

Save

Blower delay is used when a delicate product needs to

bake in a draft free environment.

From the programming mode of the selected Recipe;

Select the event in which the blower will be delayed.

Select the time the blower will be delayed.

Select the “dash” under the Bl and use the arrow key until

a “D” is shown.

Select Save to save the program.

Cycle 1 1:00 2:00

Save

On Off

The Pulse Fan Function is used

when a product requires the

blower to cycle on and of at

specific time intervals.

From the programming mode of

the selected recipe;

Select the event the blower will be

pulsed.

Select the total event time.

Select the “dash” under the BL

and use the arrow keys until a “p”

is shown. (Illustration 39)

A Pulse fan screen will prompt for

the Fan On time and Fan Off time.

Enter the desire cycle time and

select Save.

You will be returned to the

programming screen, select Save

to save the program.

Illustration 37 - Blower Delay

Illustration 38 - Pulse Blower

Illustration 38 - Pulse Cycle

REV 24

17

PDA PROGRAMMING INSTRUCTIONS

Once your Lang software has been installed and your access Key has been entered you can open the program by taping on the

Lang Oven Icon on your PDA.

A screen similar to this will open.

Time

Tem p

Events

Beam

00:00

425 F

Recipe 01

Apl Crsp

Icon Screen

Tap on the screen to pull up

Icons. Choose the Icon

that best matches the menu item.

There are 39 Icons including a blank

and an X

Menu Name

Highlight the text and use

your PDA text tool to

write in a name.

Limited to 8 Characters

Events Indicator

This only shows when there are

events programed.

Time

Indicated cumulative time

for all events, or

total cook time in hours:min:sec

Tem p

Indicates 1st event time

Events Program

Tap this to open the events

programming function

Scroll Buttons

Tap to scroll forward or back

through the 36 recipe item

Beam Button

Tap the Beam button

to send single recipe to oven.

Recipe Number

Indicated which of the 36 recipes

is currently displayed

Too l Bar

Tap on the tool bar to carry out

various functions.

Depending on model your PDA may use different writing tool. These instructions and illustrations are from a Palm Model

i705.

This Model is available pre-loaded with the Lang software; please contact Lang Customer Care at 800-882-6368 to order

your PDA.

Using the Lang Oven software enables you to update and edit menus without having to disrupt day-to-day operations.

REV 24

18

PDA PROGRAMMING INSTRUCTIONS

Adding and editing a recipe;

Time

Tem p

Events

Beam

00:00

425 F

Recipe 01

Apl Crsp

Using the stylus

tap on the events button

to display this screen

Events

Ev Time F St Vt Bl

1 00 : 00 300 00 - -

2 00 : 00 300 00 - -

3 00 : 00 300 00 - -

4 00 : 00 300 00 - -

5 00 : 00 300 00 - -

Ev Time F St Vt Bl

1 00 : 05 425 05 - -

2 00 : 00 300 00 - -

3 00 : 00 300 00 - -

4 00 : 00 300 00 - -

5 00 : 00 300 00 - -

Ev Time F St Vt Bl

1 00 : 05 425 05 - -

2 01 : 00 425 00 -

3 00 : 00 300 00 - -

4 00 : 00 300 00 - -

5 00 : 00 300 00 - -

Ev Time F St Vt Bl

1 00 : 05 425 05 - -

2 01 : 00 425 00 -

3 24 : 55 425 00 - -

4 00 : 00 300 00 - -

5 00 : 00 300 00 - -

Exit

Cancel

Each recipe can have up to 5 events, these events

control

Time; in minutes and seconds (maximum of 60 minutes per event)

Temperature: Up to 550 deg. F

Steam: up to 59 seconds

Vent: Open or Closed (Note: the vent can not open in the same event as steam)

Blower: the default is on, delay or pulse.

Entering a recipe;

We will enter the following recipe...

French Bread cooks at 425 for a total of 25 minutes,

Steam for 5 seconds at start of bake.

Open the vent for one minute after steam.

Close the vent and continue to bake at 425

Event #1

Highlight the seconds in event # 1

Enter 05

Highlight the temperature in event #1

Enter 425

Highlight the Steam time

Enter 05

Event # 2

Highlight the minutes in event #2

Enter 01

Highlight the temperature in event # 2

enter 425

Tap the - under Vt in event #2

A small 0 will appear indicating the

vent will open

Event # 3

Highlight the minutes in event # 3

Enter 24

Highlight the seconds in event #3

Enter 55

Because the total cook time is 25 minutes

and we have already entered

5 seconds for steam and 1 minute for vent

we have a balance of 24 minutes

and 55 seconds.

Highlight the temperature in event #3

Enter 425

Note:

In order for any recipe to operate there

must be a time entered,

even if there is a temperature

entered in the event.

Press the exit button to return to the main display

or

Press the Cancel button to Cancel this recipe and return to the default recipe.

REV 24

19

PDA PROGRAMMING INSTRUCTIONS

Programming Blower Delay

Events

Ev Time F St Vt Bl

1 00 : 00 300 00 - -

2 00 : 00 300 00 - -

3 00 : 00 300 00 - -

4 00 : 00 300 00 - -

5 00 : 00 300 00 - -

Ev Time F St Vt Bl

1 05 : 00 300 00 - -

2 00 : 00 300 00 - -

3 00 : 00 300 00 - -

4 00 : 00 300 00 - -

5 00 : 00 300 00 - -

Ev Time F St Vt Bl

1 05 : 00 400 00 - -

2 00 : 00 300 00 - -

3 00 : 00 300 00 - -

4 00 : 00 300 00 - -

5 00 : 00 300 00 - -

Ev Time F St Vt Bl

1 35 : 00 400 00 - D

2 00 : 00 300 00 - -

3 00 : 00 300 00 - -

4 00 : 00 300 00 - -

5 00 : 00 300 00 - -

Ev Time F St Vt Bl

1 05 : 00 400 00 - D

2 30 : 00 300 00 - -

3 00 : 00 300 00 - -

4 00 : 00 300 00 - -

5 00 : 00 300 00 - -

Ev Time F St Vt Bl

1 05 : 00 400 00 - D

2 30 : 00 400 00 - -

3 00 : 00 300 00 - -

4 00 : 00 300 00 - -

5 00 : 00 300 00 - -

Exit

Cancel

From the events screen begin by

enter the time you wish the product to cook for

For this example we will use the following recipe;

Muffins, baked at 400 deg F for 35 minutes with the blower off

for the fist 5 minutes..

No steam and the vent closed.

Highlight the minutes in event #1

and enter 5 minutes

Highlight the temperature in event #1

and enter 400

Tap the -once under Bl in event #1

The letter D will apear indicating the blower will

delay during this 5 minute event

Highlight the minutes in event #2

and enter 30

Highlight the temperature in event #2

and enter 400.

Press Exit

The blower will now remain Off for the first 5 minutes of the bake.

REV 24

20

PDA PROGRAMMING INSTRUCTIONS

Programming Blower Pulse

Events

Ev Time F St Vt Bl

1 00 : 00 300 00 - -

2 00 : 00 300 00 - -

3 00 : 00 300 00 - -

4 00 : 00 300 00 - -

5 00 : 00 300 00 - -

Ev Time F St Vt Bl

1 35 : 00 300 00 - -

2 00 : 00 300 00 - -

3 00 : 00 300 00 - -

4 00 : 00 300 00 - -

5 00 : 00 300 00 - -

Ev Time F St Vt Bl

1 35 : 00 400 00 - -

2 00 : 00 300 00 - -

3 00 : 00 300 00 - -

4 00 : 00 300 00 - -

5 00 : 00 300 00 - -

Ev Time F St Vt Bl

1 35 : 00 400 00 - P T

2 00 : 00 300 00 - -

3 00 : 00 300 00 - -

4 00 : 00 300 00 - -

5 00 : 00 300 00 - -

Ev Time F St Vt Bl

1 35 : 00 400 00 - P T

2 00 : 00 300 00 - -

3 00 : 00 300 00 - -

4 00 : 00 300 00 - -

5 00 : 00 300 00 - -

Ev Time F St Vt Bl

1 35 : 00 400 00 - P T

2 00 : 00 300 00 - -

3 00 : 00 300 00 - -

4 00 : 00 300 00 - -

5 00 : 00 300 00 - -

Exit

Cancel

From the events screen begin by

enter the time you wish the product to cook for

For this example we will use the following recipe;

Muffins, baked at 400 deg F for 35 minutes with the blower on for

1 minute and off for 2 miutes during the entire bake.

No steam and the vent closed.

Highlight the minutes in event #1

and enter 35 minutes

Highlight the temperature in event #1

and enter 400

Tap the - two times under Bl in event #1

A letter P followed by a letter T will be displayed

The P indicated a Pulse fan

the T indicated a time program

Tap the letter T

A pop-up screen will be displayed.

Enter the time in minutes and seconds that the fan will be off

Fan Pulse On Off Time

On Time Off Time

0 : 0

1 : 0

0 : 0

2: 0

Exit

Cancel

Highlight the minutes under On time

and enter 1

Highlite the minutes under Off Time

and enter 2

Tap exit.

gg

Page is loading ...

Lang LRO-2G User manual

This manual is also suitable for

Lang LRO-2G User manual

Related papers

Other documents