2. Computers & electronics
  3. Telecom & navigation
  4. Mobile phones
  5. Car kits
  6. Symmons
  7. SPP-3610

Symmons SPP-3610, SPP-3610-1.5, SPP-3610-1.75, SPP-3610-STN, SPP-3610-STN-1.5, SPP-3610-STN-1.75, SPP-3610-STS, SPP-3610-STS-1.5, SPP-3610-STS-1.75, SPP3610MB15 Installation guide

  • Hello! I've reviewed the Installation Guide for the Symmons Duro SPP-3610 Kitchen Faucet. This document details the faucet's specifications, including its single-hole mount, ceramic cartridge, and braided hose connections. The guide also covers dimensions and provides parts breakdowns. I'm ready to answer your questions about this product.
  • What is the standard flow rate of the faucet?
    What are the available finish options?
    What is the warranty for residential use?
Duro®
Model Numbers Specification
Warranty
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
SPP-3610
Pull-Out Kitchen Faucet
Installation Guide
SPP-3610
Pull-Out Kitchen Faucet
Pull-Out Kitchen Faucet shall include single hole mount
conguration, ceramic cartridge, braided hose connections
and standard 2.2 gpm (8.3 L/min) aerator. Faucet shall be
made from metal construction, plated in standard polished
chrome nish.
Dimensions
Measurements
A 1-1/8", 29 mm
B 3-3/8", 86 mm
C 11-5/16", 287 mm
D 5-1/8", 130 mm
E 4-5/16", 110 mm
FDeck Thickness Ref.
Max. 2-1/2", 64 mm
G
Hole Size
Min. Ø 1-3/8", 35 mm
Max. Ø 1-1/2", 38 mm
H10", 254 mm
I4-5/8", 117 mm
JTo Backsplash
4", 102 mm
K9-7/8", 251 mm
L1-3/4", 44 mm
M8-1/4", 210 mm
N9-1/8", 232 mm
KK
FF GG
JJ
AA
DD
LL
HH
II
MM
NN
CC
EE
BB
Compliance
-ASME A112.18.1/CSA B125.1
-NSF/ANSI 61.9, NSF/ANSI 372 c
Notes:
1) Hoses removed for clarity.
2) Dimensions subject to change without notice.
Modifications
Note: Append appropriate -sufx to model number.
-1.5 1.5 gpm (5.7 L/min) flow restrictor
-BBZ Brushed Bronze finish
-MB Matte Black finish
-STS Stainless Steel finish
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2019 Symmons Industries, Inc. ■ symmons.com ■ [email protected] ■ ZV-2548 REV E ■ 111319
Parts Breakdown
Replacement Parts
Item Description Part Number
A Pull-Out Wand RK-026
B Pull-Out Wand Hose RK-032
C Cartridge KN-4
D
E
F
Plug Button
Set Screw
Handle
RK-027
G
H
I
Mounting Washer
Mounting Nut
Mounting Screws
RK-028
2
1
A
B
C
D
E
F
G
H
I
Tools Required for Installation
Adjustable Wrench
Allen Wrench:
Handle (2.5 mm)
Phillips Head
Screwdriver
Plumber Tape
Silicone
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Installation Notes:
1) Apply a bead of clear silicone around the perimeter of all
faucet trim installed to deck surface.
2) Apply plumber tape to threaded connections as necessary.
DO NOT use plumber tape on ttings with face seal washers
or o-rings.
3) DO NOT OVERTIGHTEN ttings with face seal washers or
o-rings.
*Note: Append appropriate -sufx to repair part
number for premium nish.
/