Danfoss Heat Meter Kit Installation guide

VIBQC102

Heat Meter Kit

Now there are two heat meter kits available for ordering.

Orders will be handled by Arvika and deliveries will be from Arvika.

The heat meters can be used and mounted on the following different models:

DHP-H, DHP-L, DHP-C, DHP-A, and DHP-AL

To order a kit use one of the following code numbers:

086U7433 Heat Meter 4-10kW

Transfer price:xx€

086U7434 Heat Meter 12-16kW

Transfer price:xx€

A kit contains all the needed components for the installation:

• Connection kit inclusive flow meter

• 2 pc. NTC-sensors

• Display box

Instruction:

1. Remove the flexible hose between the condenser and the auxiliary

heater.

Supply line sensor

Flexible hose

Return line sensor

VIBQC102

2. Mount the supply line sensor.

3. Mount the return line sensor.

4. Mount the connection kit.

Connection kit

5. Mount the display box next to the heat pump.

6. Connect the cables from the sensors and the flow meter to the display

box.