Groen DH Installation guide

Groen
Brand
Groen
Model
DH
Type
Installation guide

This manual is also suitable for

Rev. A
Revised 12/03
Part Number 145475
I
I
N
N
S
S
T
T
A
A
L
L
L
L
A
A
T
T
I
I
O
O
N
N
I
I
N
N
S
S
T
T
R
R
U
U
C
C
T
T
I
I
O
O
N
N
S
S
HINGED COVER KIT
For Models
DH & DEE
DH Model
DEE Model
1. Remove cabinet cover. 2. Align holes in riser bracket with holes in
new cabinet cover.
3. Align holes in reinforcement plate with
holes in new cabinet cover and riser bracket.
4. Install mounting bolts, lock washers and
nuts to secure. Tighten to 20 ft.-lb. torque
with a 3/8” open end or socket wrench.
5. Install new cabinet cover.
6. Align studs on actuator assembly to
holes in riser bracket.
7. Attach fender washer and nuts, but do not tighten.
P/N 145475
NOTE: Apply Loctite® to all threaded fasteners during assembly.
8. Assemble actuator assembly to rear 3 dome cover
studs and secure using dome nuts. Tighten 20 in.-lb.
torque with a 1/4” open end or socket wrench.
9. Lower cover over kettle and adjust mounting bracket as required to align. Tighten the
four nuts below the actuator assembly to 10 ft.-lb. with a 1/4” open end or socket wrench.
10. Apply Loctite® to the cover studs.
11. Install handle spacers over front two
dome cover studs.
1055 Mendell Davis Drive
Jackson, MS 39272
Telephone 601 372-3903
Fax 601 373-9587
DH & DEE HINGED COVER KIT
Part Number 145475
Rev. A, Revised 12/03
13. Tighten nuts to 20 in.-lb. torque
with a 1/4” open end or socket wrench.
14. Adjust tension in actuator assembly by
turning adjusting nuts. Use two 3/4” open
end wrenches.
15. Completed assembly should look like the
photo above.
12. Attach handle over spacers and secure
with dome nuts.
Loctite® is a registered trademark of the Henkel Loctite Corporation.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Groen DH Installation guide

Groen
Brand
Groen
Model
DH
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents