Hummer 2005 H2 User guide

Brand: Hummer

Model: 2005 H2

Type: User guide

This manual is also suitable for

H2 2005

INSIDE YOUR VEHICLE

Instrument Panel . . . . . . . . . . . . . . . . . . . . . . . . . .2

Instrument Panel Cluster . . . . . . . . . . . . . . . . . . .3

Heated Front Seats . . . . . . . . . . . . . . . . . . . . . . . .4

Passenger Automatic Locking Restraint (ALR) .4

Power Lumbar Front Seats . . . . . . . . . . . . . . . . .4

Global Express-Down . . . . . . . . . . . . . . . . . . . . . .4

OnStar

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Lowering the Midgate . . . . . . . . . . . . . . . . . . . . . .5

Automatic Climate Control System . . . . . . . . . . .6

Entertainment Systems — Radio/CD . . . . . . . . .6

Rear Seat Audio (RSA) . . . . . . . . . . . . . . . . . . . . .8

Navigation Radio . . . . . . . . . . . . . . . . . . . . . . . . . .8

HomeLink

Transmitter . . . . . . . . . . . . . . . . . . . .10

Steering Wheel Controls . . . . . . . . . . . . . . . . . . .10

UTSIDE YOUR VEHICLE

Power Folding Mirrors . . . . . . . . . . . . . . . . . . . .11

Automatic Headlamp Controls . . . . . . . . . . . . . .11

Content Theft-Deterrent System . . . . . . . . . . . .12

Four-Wheel Drive and Suspension

System Controls . . . . . . . . . . . . . . . . . . . . . . . . .12

Off-Road Driving Basics Overview . . . . . . . . . .14

ERSONALIZING YOUR VEHICLE

Memory Seat and Mirrors . . . . . . . . . . . . . . . . . .16

Memory Settings for Your Vehicle

(Driver Information Center) . . . . . . . . . . . . . . . .16

Driver Information Center

Steering Wheel Controls . . . . . . . . . . . . . . . . . . .18

EHICLE SYMBOLS GLOSSARY . . . . . . . . . . . . . . . .19

OADSIDE ASSISTANCE . . . . . . . . . . . . . . . . . . . . . .20

Y GMLINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Congratulations on your purchase of a HUMMER H2. Please read this information and your Owner Manual

to ensure an outstanding ownership experience. Note that your vehicle may not include all the features

described in this booklet. Place this booklet in your Owner Manual portfolio for easy reference.

A. Air Outlets

B. Exterior Lamp Controls

C. OnStar

and Radio Steering

Wheel Buttons

D. Instrument Panel Cluster

E. Locking Rear Axle and

All-Wheel-Drive Buttons

F. Audio System

G.Air Bag Switch

H. Glove Box

I. Rear Wiper/Washer Control

J. Dome Override Button

K. Turn Signal/Multifunction Lever

L. Tilt Lever

M.Driver Information Center (DIC)

Buttons

N. Parking Brake Release

O.Traction Control 2 Button

P. Tow/Haul Selector Button

Q.Ride Height Selector Button

(if equipped)

R. Cigarette Lighter

S. Shift Lever

T. Accessory Power Outlets

U. OnStar

Buttons

V. Rear Window Defogger Button

W.Air Conditioning Temperature

Control

Getting to Know Your H2

Instrument Panel

See Section 3 of your Owner Manual.

Instrument Panel Cluster

Your vehicle’s instrument panel is

equipped with this cluster or one

very similar to it.

The instrument panel cluster includes

these key features:

A. Transmission Temperature Gauge

B. Tachometer

C. Speedometer and Transmission

Gearshift Indicator

D. Oil Pressure Gauge

E. Voltmeter

F. Engine Coolant Temperature

Gauge

G.Fuel Gauge

IMPORTANT:

See Section 3 of your

Owner Manual for more information

about what the lights, gauges and

indicators on your vehicle’s instru-

ment panel tell you about your vehi-

cle’s operation.

Getting to Know Your H2

Heated Front Seats

(if equipped)

This feature allows you to heat the front

seatbacks and seat cushions simultane-

ously or just the seatbacks. The controls

are located on the driver and front pas-

senger door panels.

Select a heat setting for both the

seatback and seat cushion

• Press and release the horizontal but-

ton (“A” above) until the indicator light

shows the desired setting.

Select a heat setting for the seatback only

• Press and release the vertical button

(“B” above) until the indicator light

shows the desired setting.

See Section 1 of your Owner Manual.

Power Lumbar Front Seats

Adjust lumbar support

• Press the front or rear of the control

located on the side of the seat cush-

ion near the door. Release at the pre-

ferred setting.

Adjust wing area of lower seatback

• Press the top or bottom of the lumbar

control. Release at the preferred

setting.

See Section 1 of your Owner Manual.

Passenger Automatic Locking

Restraint (ALR)

The safety belt is designed to lock dur-

ing an accident, but it will also lock if it is

pulled out all the way during initial buck-

ling, and you may be unaware that this

has happened. If the safety belt does

lock, unbuckle it and allow it to retract

fully, then pull it out and re-buckle the

belt.

See Section 1 of your Owner Manual.

Global Express-Down

The Global

Express-Down fea-

ture allows you to

lower all four door

windows as well as

the Midgate win-

dow with one touch

of a button.

Lower the door

windows and Midgate window

• Press the Global Express-Down

button located on the driver door

panel (see “A” above).

Lowering the Midgate

• Lower the rear

glass by using

the Global

Express-Down

button located

on the driver

door panel, or by

using the rear

glass button

located on the instrument panel to the

left of the steering column.

• Pull the bench

seat to the

forward position;

then fold the

seatback flat.

• Press the

electric Midgate

button located

on the Midgate

to release it.

• Fold the

Midgate flat; then flip over the ship

step.

See Section 2 of your Owner Manual.

OnStar

If your vehicle is OnStar-equipped, the

OnStar system provides in-vehicle

safety, security, and communications

services, available 24 hours a day, 7

days a week. These services are easily

accessed through the three OnStar

buttons in your vehicle.

• Press the white Phone button to

access OnStar Personal Calling, a

hands-free, voice-activated communi-

cations service.*

• Press the blue OnStar button to con-

nect to an OnStar Advisor for servic-

es such as GM Goodwrench Remote

Diagnostics or routing and location

assistance.**

• Press the red Emergency button to

connect to an OnStar Advisor who

can contact a nearby emergency

services provider to dispatch ambu-

lance, police, fire, or other emergency

services to your location.

For more information about OnStar fea-

tures, refer to the OnStar Owner’s

Manual and Audio Tour CD, located in

your glove box.

* Available in most markets.

**Routing and location assistance may require service upgrade.

See Section 2 of your Owner Manual.

Raise the door windows and Midgate

window

• Press and hold the up button located

next to the Global Express-Down

button on the driver door panel

(see “B”).

See Section 2 of your Owner Manual.

Getting to Know Your H2

Automatic Climate Control

System

In addition to its automatic temperature

control feature, this climate control sys-

tem allows the driver and front passen-

ger to choose separate temperature

settings.

Adjust settings for automatic

operation

• Push the AUTO button (“A” above)

and adjust the temperature knob

(“B” above) to the desired tempera-

ture, to set automatic air delivery

mode, fan speed, A/C and recircula-

tion functions for the driver.

Set same temperature for driver and

front passenger

• Press and hold the AUTO button for

four seconds.

Select air distribution manually

• Press and release the Mode button

(“C” above) until the desired source

of air is indicated on the display.

Manually raise or lower fan speed

• Press the upper or lower portion of

the Fan control button (“D” above).

Additional Climate Control System

Functions

: Recirculates interior air while in

Vent, Bi-Level positions. To prevent win-

dow fogging, Recirculation will not oper-

ate in the Defog, Defrost or Floor mode.

: Clears windshield and front side

windows of fog/frost.

: Clears rear glass of fog/frost

and activates heated outside rearview

mirrors.

: Turns the air conditioning system

on and off. The snowflake symbol

appears on the display when the air

conditioning system is on.

See Section 3 of your Owner Manual.

Note: When the climate control system

is Off, outside air will continue to enter

the vehicle and will be directed accord-

ing to the mode position selected. This

is normal climate control operation.

Entertainment Systems —

Radio/CD

Your radio may have a button marked

“H” or “HR” to represent hours and an

“M” or “MIN” to represent minutes.

Set the time

• Press and hold the hour button

until the correct hour appears on the

display.

• Insert the disc partway into the slot,

label side up; the player will pull the

disc in.

Eject a CD

• Press and release the eject button

( ).

Load multiple CDs

• With the ignition on, press and hold

the LOAD button for two seconds.

The unit beeps and the light to the

right of the slot begins to flash.

• When the light stops flashing and

turns green, insert a disc partway,

label side up.

• The indicator light will begin blinking

and turn steadily green. Load another

disc at this time.

• When loading more than one but

fewer than six CDs, press the LOAD

button again to signal that loading is

complete.

• When more than one disc is loaded,

a number for each disc is displayed.

• To play a specific CD, press the CD

AUX button and then the number of

the CD you want to hear.

• A small bar appears under the CD

number that is playing, and the track

number appears.

Eject multiple CDs

• Press and hold the Eject button ( )

for two seconds. You will hear a beep

and the light will flash when a CD is

being ejected.

See Section 3 of your Owner Manual.

• Press and hold the minute button

until the correct minute appears on

the display.

Program radio station presets

• Turn the radio on.

• Press BAND to select the band (AM,

FM1/FM2).

• Use the seek or tune knob to tune in

the desired station.

• Press AUTO EQ or AUTO TONE (as

applicable to your radio) to select the

equalization that best suits the type of

station selected.

• Press and hold one of the six num-

bered buttons until a beep sounds;

release the button.

• Repeat these steps for each station

preset, using a different numbered

button for each station.

Six-Disc CD Changer (if equipped)

Load one CD

• With the ignition on, press and

release the LOAD side of the LOAD

CD button.

• Wait for the indicator light at the right

side of the slot to turn green.

Note: The time may be set with the

ignition on or off.

eight seconds have played. If the CD

player on the front radio is in use, you

cannot seek different tracks.

PROG (Program): The front passengers

must be listening to something different

for each of these functions to work:

• Press this button to go to the preset

radio stations set on the pushbuttons

on the main radio.

• When a cassette tape is playing,

press this button to go to the other

side of the tape.

• When a CD is playing in the radio,

press this button to go back to the

beginning of the CD.

• When a CD is playing in the CD

changer, press this button to select

the next CD.

See Section 3 of your Owner Manual.

Getting to Know Your H2

Rear Seat Audio (RSA)

The following functions are controlled by

the RSA system buttons:

(Power): Press this button to turn the

Rear Seat Audio system on or off. You

may operate the Rear Seat Audio

functions even when the primary radio

power is off.

(Volume): Turn this knob to increase

or decrease volume. The left knob con-

trols the left headphone and the right

knob controls the right headphone.

SRC (Source): Press this button to

select an audio source: radio, cassette

tapes, CDs, or DVDs, depending on

your vehicle’s options.

(SEEK): While listening to FM1,

FM2, or AM, press the up or down arrow

to tune to the next or previous station

and stay there. If the front radio is in

use, you cannot seek different stations.

While listening to a cassette tape, press

the up or down arrow to hear the next or

previous selection. If the cassette tape

on the front radio is in use, you cannot

seek different selections on a tape.

While listening to a CD, press the up

arrow to hear the next track on the CD.

Press the down arrow to go back to the

start of the current track if more than

Navigation Radio (if equipped)

Set a station preset

1. Turn the radio on by pressing the

VOL (power) button.

2. Push the BAND button to select the

desired band.

3. Use either the TUNE knob or the

SEEK rocker to tune to a station.

4. Press and hold one of the six buttons

on the lower side of the radio screen

until you hear a beep or see the

station displayed on the button

pushed.

Set your geographical area and

destination

1. Turn the radio on by pressing the

VOL (power) button.

2. Insert a map disc into the radio

CD slot.

3. If a notice appears, press the NEXT

button on the screen.

4. Push the DEST button on the screen

after the default map screen

appears.

5. Press the CHANGE button on the

right side of the destination screen.

6. Determine whether your

geographical area is selected. If it

is not, press the button that

represents your area.

7. Press the ADDRESS button on the

screen.

8. Enter the name of your street. The

“smart speller” will assist you.

(Use the “Back” arrow to correct any

misspellings.)

9. If provided a list of streets, select

your street.

10.Enter the street address.

11.If provided a list of cities, select the

proper one.

12.Press the ENTER DESTINATION

button.

The system now calculates the fastest

route. You may choose to either enter

into guidance mode by pressing the

NAV button on the upper left or you can

view and select alternate routes by

pressing the ROUTE button, fol-

lowed by the 3 ROUTES button.

Navigation Radio Operating Tips

• Pushing one of the hard keys on

the left side of the radio will

always return you to a top level

menu.

• Once a route is set, it will remain

until it is reached or canceled.

Note that you can stop along the

way, return to the vehicle and it

will still be in guidance mode.

• While navigating, you can press

“Nav Options” to bring up a menu

that allows you to cancel the

route.

• The FASTEST selection will

choose main roads for travel.

The SHORTEST selection will

route you using all of the

shortcuts.

• After selecting the NAV mode,

pushing the Menu button allows

you to set up the map appear-

ance, adjust the volume of the

voice prompts, and utilize many

other features.

• The CD button allows you to

select the internal CD player,

the external CD changer (if

equipped) or a control screen

for rear seat entertainment (if

equipped). Note that you cannot

play a CD in the internal CD

player and have route guidance

at the same time.

• The AUDIO button allows you to

adjust balance, fade, bass and

treble, as well as the amplifier

DSP settings.

• The CONFIG button allows you

to adjust the brightness and

Getting to Know Your H2

HomeLink

Transmitter

Program HomeLink

1. Determine which of the three chan-

nels (buttons) you want to program:

garage door opener, gate opener,

entry door locks or other.

2. Press and hold the desired HomeLink

button through step 3.

3. When the HomeLink light blinks slow-

ly (within 30 seconds), hold your

transmitter/opener 1” to 3” away from

Steering Wheel Controls

(OnStar/Voice Recognition)

(if equipped): This button will activate

OnStar

for use. (Note: If your vehicle is

not equipped with OnStar

, pressing this

button will mute the radio.)

contrast of the main screen. You

can also override the vehicle

selection of day or night screen

mode and change the vehicle chime

volume.

• Another useful feature allows you to

add several common or planned

destinations as memory points from

the NAV menu. Then when you wish

to navigate to one of these points you

can simply select it as a memory

point from the destination entry

screen.

• A scroll bar on the left part of the

screen indicates that there are more

items that can be displayed by

pressing the page up/down or line

up/down arrows.

See your Navigation Radio supplement for

more information.

the HomeLink buttons. Then hold

your transmitter button on until the

HomeLink light flashes rapidly (up to

90 seconds). The process is now

complete.

See Section 2 of your Owner Manual.

Note: If your transmitter has a “rolling

code” feature, this process may not

work. Please refer to your Owner

Manual or contact HomeLink at

1-800-355-3515 (www.homelink.com).

Power Folding Mirrors

Fold mirrors

• Move the

selector switch

located above

the mirror

control (see

“A”) to

the center

position.

• Press the right

side of the

four-way control pad (see “B”)

to fold the mirrors in.

• Press the left side of the four-way

control pad to fold the mirrors out.

If the mirrors have been folded manual-

ly, carefully rotate them outboard to their

original position until a “click” sound is

heard. Then, move them through the

power folding cycle three times to reset

them in their tracks.

See Section 2 of your Owner Manual.

Automatic Headlamp Controls

Turn off Daytime Running Lamps

(DRL) and automatic headlamps

• Turn the exterior lamps knob

(located to the left of the steering

wheel) to Off ( ) and release.

Activate the automatic headlamp

system

• Turn the exterior lamps knob to

AUTO. The automatic headlamp

system will turn on the front and rear

lamps.

Illuminate the parking lamps, side-

marker lamps, taillamps, instrument

panel/radio lights, license plate lamps

and roof marker lamps

• Turn the exterior lamps knob to the

parking lamp position ( ).

Manually activate the headlamps, all

exterior tail/side-marker lamps and

the instrument panel/radio lights

• Turn the exterior lamps knob to this

position ( ).

See Section 3 of your Owner Manual.

PROG:

Press this button to cycle

through the radio presets.

Press to select AM, FM, FM2,

cassette or CD.

Press to seek radio stations,

to advance within CD tracks, or turn the

cassette tape to the other side.

Press to adjust radio volume.

See Section 3 of your Owner Manual.

Note: Your DRL or automatic head-

lamps will re-engage at the next key

cycle.

Getting to Know Your H2

Content Theft-Deterrent System

(if equipped)

Arm the System

• Lock the doors using the power door

lock switch or the Remote Keyless

Entry transmitter. The Security light

on the instrument cluster will illumi-

nate (or flash if a door is open) to

inform the driver the system is about

to be armed. After a short period of

time with all doors closed, the

Security light will go off, indicating the

system is armed and functioning.

If the Door Lock Delay setting is

turned on, the system will not be

armed until all doors are closed and

the delay timer has expired.

Because your vehicle is equipped with a

Driver Information Center, you can

program the alarm to the following:

• Both Horn/Headlamps

• Horn only

• Lamps only

• Off

See Section 2 of your Owner Manual.

Note: Your vehicle’s factory default set-

ting is Horn and Lamps. See the

Personalizing Your Vehicle section of

this booklet for more information.

Four-Wheel Drive and

Suspension System Controls

Transfer Case

Buttons

Your vehicle’s

transfer case

buttons (shown

here) allow you

to shift into and

out of the vari-

ous four-

wheel-drive

modes.

Locking Rear Axle

The locking rear axle can give you addi-

tional rear wheel traction when driving in

off-road conditions such as mud, snow,

sand, steep

hills and

uneven terrain.

This feature

can only be

engaged when

the transfer

case is in the

4LO Locked

mode. It is rec-

ommended the

axle be locked

when the vehicle is stopped. Please

note that the locker will automatically

deactivate above 20 mph.

vehicle approximately 2 inches (5 cm)

over the normal ride height for additional

running ground clearance.

To use this feature, the following condi-

tions must be met:

1. All the doors must be fully closed (the

suspension will not rise or lower if a

door is open).

2. The vehicle must be traveling less

than 35 mph (56 km/h), or the system

will not activate.

Tow/Haul Mode

Your vehicle is equipped with a

Tow/Haul mode that assists you when

towing or hauling a heavy load.

When pulling a heavy trailer or load, the

Tow/Haul mode:

• Reduces the frequency and improves

the predictability of transmission

shifts.

• Provides more solid shift feel.

• Improves the control of vehicle speed

while requiring less throttle pedal

activity.

See Section 2 of your Owner Manual.

Traction Control System

The H2’s standard Traction Control

System operates only when it senses

that a wheel is spinning or beginning to

lose traction. When this happens, the

system applies the brakes to limit

wheelspin.

TC2 allows limited wheelspin to help

gain additional traction in deep sand or

mud conditions.

The TC2 system operates only in the

following transfer case modes:

• 4HI Lock

• 4LO Lock

• 4LO Lock and Locking Rear Axle

Activate the TC2 System

• Press the TC2 button located on the

instrument panel to the right of the

steering wheel. The orange indicator

light next to the “2” will illuminate

when the feature is active. If the

transfer case is in a mode where the

feature is not allowed, the indicator

light will flash for 15 seconds and

then go out.

Selectable Extended Rear Ride Height

(if equipped)

This feature is part of the optional elec-

tronically controlled air suspension sys-

tem. The selectable rear ride height

allows you to raise the rear of the

Getting to Know Your H2

Off-Road Driving Basics

Overview

Off-road driving can be great fun, but it

does have its hazards. The greatest

hazard can be the terrain itself. Off-road

driving involves some new skills, so it’s

very important to read this guide as well

as your Owner Manual.

Loading Your Vehicle for Off-Road

Driving

There are some important things to

remember about loading your vehicle:

• The heaviest things should be on the

load floor and forward of your rear

axle. Put heavier items as forward as

you can, but do not place them in the

front seat area.

• Be sure the load is secured properly

to prevent items from being tossed

during off-road driving.

CAUTION

• Cargo on the load floor piled higher

than the seat can be thrown forward

during sudden stops.

• Unsecured cargo on the load floor

can be tossed about when driving

over rough terrain.

• Heavy loads on the roof raise the

vehicle’s center of gravity, making it

more likely to roll over.

High Mobility Characteristics

The HUMMER H2 has a:

A. 10-inch (coil) running ground clear-

ance and a

B. 9.9-inch (22.8-

cm) axle to

ground clear-

ance, while

maintaining a

low silhouette

and a low cen-

ter of gravity.

These characteristics are essential to

safety in off-road operation.

The HUMMER H2 has an:

A. Approach angle of 40.4˚ (coil) and a

B. Departure angle of 39.6˚(coil).

The HUMMER H2 design specifications

provide the ability to traverse a maxi-

mum 60% (31°) grade, with passengers

and equipment, on high friction surfaces

at 6 mph (9.7 km/h).

Specifications also enable the HUMMER

H2 to traverse a 40% (22˚) side slope,

with the vehicle fully loaded on high fric-

tion surfaces at 6 mph (9.7 km/h).

The HUMMER H2 can climb a 16-inch

(40.6-cm) vertical step.

See Section 4 of your Owner Manual.

The driver’s seat

and the outside

rearview mirrors can

be programmed to

recall memory set-

tings using the

Memory Control but-

tons on the driver’s

door.

To store the memory settings:

1. Shift the vehicle into Park.

2. Adjust the driver’s seat, including the

seatback recliner, lumbar and side

wing area.

3. Adjust both outside mirrors.

4. Press and hold the 1 or 2 button of

the memory control for three seconds.

A double chime will sound.

Repeat the procedure for a second

driver and select the other Memory

Control button.

Each time button 1 or 2 is pressed with

the vehicle in Park, the memory settings

will be recalled. To stop recall movement

of the driver’s seat at any time, press

one of the memory buttons or power

seat controls.

See Section 2 of your Owner Manual.

Getting to Know Your H2

Memory Seat and Mirrors

(if equipped)

Memory Settings for Your Vehicle

(Driver Information Center)

(if equipped)

To scroll though the features that can be

customized using the Driver Information

Center:

1. Press the Personalization button

located on the steering wheel.

2. Press the Select button to

choose your desired setting. The first

setting is the default setting from the

factory.

3. Press the Personalization button to

move to the next feature.

Lock Doors

(Automatically locks the doors.)

• Lock Doors: In Gear

• Lock Doors: With Speed

Unlock Doors

(Automatically unlocks the doors.)

• Unlock Doors: In Park

• Unlock Driver: In Park

• Unlock Doors: Key Out

• Unlock Doors: Manually

Door Lock Delay

(Delays locking the doors and tailgate

until five seconds after the last door is

closed.)

• Door Lock Delay: Off

• Door Lock Delay: On

Lock Feedback

(The feedback received when locking

the vehicle with the Remote Keyless

Entry transmitter.)

• Lock Feedback: Both

• Lock Feedback: Lamps

• Lock Feedback: Horn

• Lock Feedback: Off

Unlock Feedback

(The feedback received when unlocking

the vehicle with the Remote Keyless

Entry transmitter.)

• Unlock Feedback: Lamps

• Unlock Feedback: Horn

• Unlock Feedback: Both

• Unlock Feedback: Off

Headlamp Delay

(The amount of time the headlamps will

stay on after the vehicle is turned off.)

• Headlamp Delay: 10

• Headlamp Delay: 20 Sec

• Headlamp Delay: 40 Sec

• Headlamp Delay: 1 Min

• Headlamp Delay: 2 Min

• Headlamp Delay: 3 Min

• Headlamp Delay: Off

Perimeter Lights

(The headlamps and back-up lamps will

come on for 40 seconds, if it is dark

enough, when unlocking the vehicle with

the Remote Keyless Entry transmitter.)

• Perimeter Lights: On

• Perimeter Lights: Off

Easy Exit Seat

(The driver’s seat moves to the exit

position when the key is removed from

the ignition.)

• Easy Exit Seat: Off

• Easy Exit Seat: On

Curb View

(The outside rearview mirror(s) tilt down

when the vehicle is shifted into

Reverse.)

• Curb View: Off

• Curb View: Passenger

• Curb View: Driver

• Curb View: Both

Alarm Warning

(The feedback received when the alarm

is active.)

• Alarm Warning: Both

• Alarm Warning: Off

• Alarm Warning: Horn

• Alarm Warning: Lamps

Elevated Idle

(On diesel engines only. Activates the

idle/exhaust restrictor feature.)

• Elevated Idle: Off

• Elevated Idle: On

Language

(The Driver Information Center display

language.)

• Language: English

• Language: Francais (French)

• Language: Espanol (Spanish)

Display Units

(The units in which all information will be

displayed.)

• Display Units: English

• Display Units: Metric

See Section 3 of your Owner Manual.

Getting to Know Your H2

Fuel Information

Press the Fuel Information button

to scroll through the Fuel Range, Fuel

Used, Average Economy and Engine Oil

Life selections on the Driver Information

Center.

Fuel Range

This mode shows the range in miles that

the vehicle can travel with the current

amount of fuel. The display will show

Low if the fuel level is low.

Fuel Used

This mode shows the current amount

of fuel used in gallons since the last

reset for Fuel Used. This mode should

be reset after every fuel tank fill-up.

Average Economy

This mode shows the average fuel

economy in miles per gallon since the

last reset for Average Economy.

Engine Oil Life

This mode shows the percentage of oil

life left until it is recommended to

change the engine oil. An oil and filter

change should be performed within 600

miles of the Change Oil message being

displayed.

Reset Fuel Information

• While a fuel information mode is

displayed, press and hold

for several seconds. The displayed

mode will be reset.

See Section 3 of your Owner Manual.

Driver Information Center

Steering Wheel Controls

(if equipped)

Your steering wheel-mounted DIC con-

trols offer a variety of functions, includ-

ing providing access to trip and fuel

economy information.

Odometer/Trip Settings

Your vehicle’s odometer/trip settings

operate only when they are turned on.

• Press the Trip button ( ) to access

the odometer setting. Continue to

press the Trip button to access the

following trip modes:

– Trip A

– Trip B

– Timer

– Engine Hours

Reset trip information

• Press and hold for two seconds

while viewing any of the trip modes

on the Driver Information Center.

Note: Whether your vehicle is equipped

with a Driver Information Center or not,

you can select and reset trip features by

using the Trip Odometer Reset Stem

located on the instrument panel cluster.

Vehicle Symbols Glossary

Air Bag Readiness Light

Air Conditioning (A/C)

Antilock Brake System

Warning Light

Brake System Warning Light

Cruise Control Set

Dome Lamps Override Button

DIC Trip Information Button

(on steering wheel)

DIC Fuel Information Button

(on steering wheel)

DIC Personalization/Menu Button

(on steering wheel)

DIC Select Button

(on steering wheel)

Headlamps

Instrument Panel Brightness

Control

Malfunction Indicator Lamp

(Check Engine Light)

Off

Off/On

Parking Lamps

Rear Window Defogger

Safety Belt Reminder Light

Security Light

Tow/Haul Mode Light

Traction Off Light

Following are examples of symbols you may find on your vehicle. It is important to

become familiar with them, as they alert you to various vehicle operating conditions.

Getting to Know Your H2

Roadside Assistance

My GMLink

1-866-HUMMER6 (486-6376), or press

the blue OnStar button.

TTY: 1-888-889-2438

HUMMER’s Roadside Assistance is

available 24 hours a day, 7 days a

week, 365 days a year.

Roadside Assistance provides

stranded owners with over-the-phone

roadside repairs, location of the nearest

HUMMER dealer or the following special

services:

• Fuel delivery

• Lockout service

• Tow to nearest dealership for

warranty service

• Change a flat tire

• Jump starts

The Roadside Assistance services listed

are available for a period of 3 years/

36,000 miles (60,000 km). All services

must be prearranged by HUMMER

Roadside Assistance.

The HUMMER Owner Center at My

GMLink is a complimentary service for

HUMMER Owners, a one-stop resource

to enhance your HUMMER ownership

experience. Exclusive member benefits

include online service reminders, vehicle

maintenance tips, online owner manual,

special privileges and more. Sign up

today at www.mygmlink.com

When you call, your Roadside

Assistance representative will ask for

the following information:

• Vehicle Identification Number (VIN)

• Name and home address

• Telephone number and location from

which you are calling

• Location, license plate number and

color of your HUMMER

• Mileage of vehicle and description of

problem

Certain restrictions, precautions and safety procedures apply to your vehicle. Please read your Owner

Manual for complete instructions. All information contained herein is based on information available at

05H2GTK B

Hummer 2005 H2 User guide

Brand: Hummer

Model: 2005 H2

Type: User guide

This manual is also suitable for

H2 2005

Download PDF

report

Hummer 2005 H2 User guide

This manual is also suitable for

Hummer 2005 H2 User guide

Related papers

Other documents