Hummer 2004 H2 Getting To Know Manual

Brand: Hummer

Model: 2004 H2

Type: Getting To Know Manual

Hummer 2004 H2 offers a variety of features to enhance your driving experience. Inside the vehicle, you'll find heated front seats, power lumbar front seats, and an automatic dimming rearview mirror with compass and temperature display. The OnStar® Communication System allows you to connect with an OnStar® Advisor for assistance or to contact emergency services. The automatic climate control system ensures a comfortable temperature for both the driver and front passenger. Entertainment options include a radio/CD player and a six-disc CD changer.

INSIDE YOUR VEHICLE

Instrument Panel . . . . . . . . . . . . . . . . . . . . . . . . . .2

Instrument Panel Cluster . . . . . . . . . . . . . . . . . . .3

Heated Front Seats . . . . . . . . . . . . . . . . . . . . . . . .4

Power Lumbar Front Seats . . . . . . . . . . . . . . . . .4

Passenger Automatic Locking Restraint (ALR) .4

Automatic Dimming Rearview Mirror with

Compass and Temperature Display . . . . . . . . . .5

OnStar

Communication System . . . . . . . . . . . . .5

Automatic Climate Control System . . . . . . . . . . .6

Entertainment Systems — Radio/CD . . . . . . . . .6

Rear Seat Audio (RSA) . . . . . . . . . . . . . . . . . . . . .8

Navigation Radio . . . . . . . . . . . . . . . . . . . . . . . . . .9

Sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

HomeLink

Transmitter . . . . . . . . . . . . . . . . . . . .10

Steering Wheel Controls . . . . . . . . . . . . . . . . . . .10

UTSIDE YOUR VEHICLE

Power Folding Mirrors . . . . . . . . . . . . . . . . . . . .11

Automatic Headlamp Controls . . . . . . . . . . . . . .11

Content Theft-Deterrent System . . . . . . . . . . . .12

Four-Wheel Drive and Suspension

System Controls . . . . . . . . . . . . . . . . . . . . . . . . .12

Off-Road Driving Basics Overview . . . . . . . . . .14

ERSONALIZING YOUR VEHICLE

Memory Positions for Driver’s Seat, Mirrors,

Radio and Climate Controls . . . . . . . . . . . . . . . .16

Memory Settings for Your Vehicle

(Driver Information Center) . . . . . . . . . . . . . . . .16

Driver Information Center

Steering Wheel Controls . . . . . . . . . . . . . . . . . . .18

EHICLE SYMBOLS GLOSSARY . . . . . . . . . . . . . . . .19

OADSIDE ASSISTANCE PROGRAM . . . . . . . . . . . . .20

Y GMLINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Congratulations on your purchase of a HUMMER H2. Please read this information and your

Owner Manual to ensure an outstanding ownership experience. Note that your vehicle may not

include all the features described in this booklet. Place this booklet in your Owner Manual

portfolio for easy reference.

Hummer2004_final.qxd 9/5/03 11:19 AM Page 1

A. Air Outlets

B. Exterior Lamp Controls

C. OnStar

and Radio Steering

Wheel Buttons

D. Instrument Panel Cluster

E. Locking Rear Axle and

All-Wheel-Drive Buttons

F. Audio Systems

G. Air Bag Switch

H. Glove Box

I. Rear Wiper/Washer Control

J. Dome Override Button

K. Turn Signal/Multifunction Lever

L. Tilt Lever

M.Driver Information Center (DIC)

Buttons

N. Parking Brake Release

O. Traction Control 2 Button

P. Tow/Haul Selector Button

Q. Ride Height Selector Button

(if equipped)

R. Cigarette Lighter

S. Shift Lever

T. Accessory Power Outlets

U. OnStar

Buttons

V. Rear Window Defogger Button

W.Air Conditioning Temperature

Control

Getting to Know Your H2

Instrument Panel

See Section 3 of your Owner Manual.

Hummer2004_final.qxd 9/5/03 11:19 AM Page 2

Instrument Panel Cluster

Your vehicle’s instrument panel is

equipped with this cluster or one

very similar to it.

The instrument panel cluster includes

these key features:

A. Transmission Temperature Gauge

B. Tachometer

C. Speedometer and Transmission

Gearshift Indicator

D. Oil Pressure Gauge

E. Voltmeter

F. Engine Coolant Temperature

Gauge

G. Fuel Gauge

IMPORTANT: See Section 3 of your

Owner Manual for more information

about what the lights, gauges and

indicators on your vehicle’s instru-

ment panel tell you about your vehi-

cle’s operation.

Hummer2004_final.qxd 9/5/03 11:19 AM Page 3

Getting to Know Your H2

Heated Front Seats

(if equipped)

This feature allows you to heat the front

seatbacks and seat cushions simultane-

ously or just the seatbacks. The controls

are located on the driver and front pas-

senger door panels.

Select a heat setting for both the

seatback and seat cushion

• Press and release the horizontal but-

ton (“A” above) until the indicator light

shows the desired setting.

Select a heat setting for the seatback

only

• Press and release the vertical button

(“B” above) until the indicator light

shows the desired setting.

See Section 1 of your Owner Manual.

Power Lumbar Front Seats

Adjust lumbar support

• Press the front or rear of the control

located on the side of the seat cush-

ion near the door. Release at the pre-

ferred setting.

Adjust wing area of lower seatback

• Press the top or bottom of the lumbar

control. Release at the preferred

setting.

See Section 1 of your Owner Manual.

Passenger Automatic Locking

Restraint (ALR)

The safety belt is designed to lock dur-

ing an accident, but it will also lock if it is

pulled out all the way during initial buck-

ling, and you may be unaware that this

has happened. If the safety belt does

lock, unbuckle it and allow it to retract

fully, then pull it out and re-buckle the

belt.

See Section 1 of your Owner Manual.

Hummer2004_final.qxd 9/5/03 11:19 AM Page 4

Automatic Dimming Rearview

Mirror with Compass and

Temperature Display

When on, the mirror automatically

dims to the proper level to minimize

glare from lights behind you when it’s

dark outside.

Turn the self-dimming function on

or off

• Briefly press the TEMP button for

eight seconds.

Turn the outside temperature

displays and compass readings on

or off

• Press the TEMP or COMP button.

Display temperature

• Press the TEMP button and hold for

four seconds to toggle between °C

and °F. Once the desired °C or °F is

displayed, release the button. Wait

four seconds and the temperature will

be displayed.

See Section 2 of your Owner Manual.

OnStar

Communication System

Use the dash-mounted OnStar

Communications system

• Press to connect to an OnStar

Advisor.

• Press the white dot to answer or end

a call from the OnStar

Center.

• Press in an emergency to

connect to an OnStar

Advisor who

can contact the nearest emergency

services provider.

See Section 2 of your Owner Manual.

Hummer2004_final.qxd 9/5/03 11:19 AM Page 5

Getting to Know Your H2

Automatic Climate Control

System

In addition to its automatic temperature

control feature, this climate control sys-

tem allows the driver and front passen-

ger to choose separate temperature

settings.

Adjust settings for automatic

operation

• Push the AUTO button (“A” above)

and adjust the temperature knob

(“B” above) to the desired tempera-

ture, to set automatic air delivery

mode, fan speed, A/C and recircula-

tion functions for the driver.

Set same temperature for driver and

front passenger

• Press and hold the AUTO button for

four seconds.

Select air distribution manually

• Press and release the MODE button

(“C” above) until the desired source

of air is indicated on the display.

Manually raise or lower fan speed

• Press the upper or lower portion of

the FAN control button (“D” above).

Additional Climate Control System

Functions

: Recirculates interior air while in

Vent, Bi-Level positions. To prevent win-

dow fogging, Recirculation will not oper-

ate in the Defog, Defrost or Floor

modes.

: Clears windshield and front side

windows of fog/frost.

: Clears rear glass of fog/frost

and activates heated outside rearview

mirrors.

: Turns the air conditioning system

on and off.

: Appears on the display when the air

conditioning system is ON.

See Section 3 of your Owner Manual.

Note: When the climate control system

is OFF, outside air will continue to enter

the vehicle and will be directed accord-

ing to the mode position selected. This

is normal climate control operation.

Entertainment Systems —

Radio/CD

Set the time

Your radio may have a button marked

“H” or “HR” to represent hours and an

“M” or “MIN” to represent minutes.

Hummer2004_final.qxd 9/5/03 11:19 AM Page 6

• Wait for the indicator light at the right

side of the slot to turn green.

• Insert the disc partway into the slot,

label side up; the player will pull the

disc in.

Eject a CD

• Press and release the eject button

( ).

Load multiple CDs

• With the ignition on, press and hold

the LOAD button for two seconds.

The unit beeps and the light to the

right of the slot begins to flash.

• When the light stops flashing and

turns green, insert a disc partway,

label side up.

• The indicator light will begin blinking

and turn steadily green. Load another

disc at this time.

• When loading more than one but

fewer than six CDs, press the LOAD

button again to signal that loading is

complete.

• When more than one disc is loaded,

a number for each disc is displayed.

• To play a specific CD, press the CD

AUX button and then the number of

the CD you want to hear.

• A small bar appears under the CD

number that is playing, and the track

number appears.

Eject multiple CDs

• Press and hold the Eject button ( )

for two seconds. You will hear a beep

and the light will flash when a CD is

being ejected.

See Section 3 of your Owner Manual.

• Press and hold the hour button

until the correct hour appears on the

display.

• Press and hold the minute button

until the correct minute appears on

the display.

Program radio station presets

•Turn the radio on.

• Press BAND to select the band (AM,

FM1/FM2)

• Use the seek or tune knob to tune in

the desired station.

• Press AUTO EQ or AUTO TONE (as

applicable to your radio) to select the

equalization that best suits the type of

station selected.

• Press and hold one of the six num-

bered buttons until a beep sounds;

release the button.

• Repeat these steps for each station

preset, using a different numbered

button for each station.

Six-Disc CD Changer (if equipped)

Load 1 CD

• With the ignition on, press and

release the LOAD side of the LOAD

CD button.

Note: The time may be set with the

ignition on or off.

Hummer2004_final.qxd 9/5/03 11:19 AM Page 7

(SEEK):

While listening to FM1, FM2, or AM,

press the up or the down arrow to tune

to the next or the previous station

and stay there. If the front radio is in

use, you cannot seek through different

stations.

While listening to a cassette tape, press

the up or the down arrow to hear the

next or the previous selection. If the cas-

sette tape on the front radio is in use,

you cannot seek through different selec-

tions on a tape.

While listening to a CD, press the up

arrow to hear the next track on the CD.

Press the down arrow to go back to the

start of the current track if more than

eight seconds have played. If the CD

player on the front radio is in use, you

cannot seek through different tracks.

PROG (Program): The front passengers

must be listening to something different

for each of these functions to work:

• Press this button to go to the preset

radio stations set on the pushbuttons

on the main radio.

• When a cassette tape is playing,

press this button to go to the other

side of the tape.

• When a CD is playing in the radio,

press this button to go back to the

beginning of the CD.

• When a CD is playing in the CD

changer, press this button to select

the next CD.

See Section 3 of your Owner Manual.

Getting to Know Your H2

Rear Seat Audio (RSA)

The following functions are controlled by

the RSA system buttons:

(Power): Press this button to turn the

rear seat audio system on or off. You

may operate the rear seat audio

functions even when the primary radio

power is off.

(Volume): Turn this knob to increase

or decrease volume. The left knob con-

trols the left headphone and the right

knob controls the right headphone.

SRC (Source): Press this button to

select an audio source: radio, cassette

tapes, CDs, or DVDs, depending on

your vehicle’s options.

Hummer2004_final.qxd 9/5/03 11:19 AM Page 8

Navigation Radio (if equipped)

Set a station preset

•Turn the radio on by pressing the

VOL (power) button (“1” above).

• Push the BAND button (“2” above)

to select a desired band.

• Use either the control pad (“3” above)

or SEEK rocker to tune a station.

• Press and hold one of the six buttons

on the right side of the radio

(“4” above) until you hear a beep or

see the station displayed next to the

button pushed.

Set your geographical area and

destination

•Turn the radio on by pressing the

VOL (power) button.

• Insert a map disc into the radio

CD slot.

• If a notice appears, use the control

pad to enter the highlighted NEXT

box by pushing the control pad.

• Push the DEST key.

Continue using the control pad for the

following steps:

• Highlight and enter the CHANGE box

on the right.

• Determine whether your geographical

area is selected. If it is not,

select/enter your area.

• Select/enter the ADDRESS box.

• Select/enter the name of the street.

(Note: Use the “Back” arrow to cor-

rect any misspellings.)

• If provided a list of streets, select the

correct street.

• Enter the street address.

• If provided a list of cities, select/enter

the proper one.

• Press the ADD button.

The system now calculates the fastest

route. Either press the map button in the

upper-right or use the control pad to

view/select alternate routes.

Sunroof (if equipped)

The sunroof controls are located in the

overhead console.

Close the sunroof

• Hold the front portion of the button

down (“A” above) until the sunroof

motor stops. The sunroof will tilt up

slightly to seal. This is normal.

Open sunroof to vent position

• Press the front portion of button when

the sunroof is closed.

Note: See your Navigation System

manual for more information.

Hummer2004_final.qxd 9/5/03 11:20 AM Page 9

Getting to Know Your H2

HomeLink

Transmitter

Program HomeLink

1. Determine which of the three chan-

nels (buttons) you want to program:

garage door opener, gate opener,

entry door locks or other.

2. Press and hold the desired HomeLink

button through step 3.

3. When the HomeLink light blinks slow-

ly (within 30 seconds), hold your

transmitter/opener 1” to 3” away from

the HomeLink buttons. Then hold

your transmitter button on until the

HomeLink light flashes rapidly (up to

90 seconds). The process is now

complete.

See Section 2 of your Owner Manual.

Note: If your transmitter has a “rolling

code” feature, the above process may

not work. Please refer to your Owner

Manual or contact HomeLink at

1-800-335-3515 (www.homelink.com).

Steering Wheel Controls

(OnStar/Voice Recognition)

(if equipped): This button will activate

OnStar

for use. (Note: If your vehicle is

not equipped with the OnStar

Communications System, pressing this

button will mute the radio.)

PROG: This button will cycle through

the radio presets.

: To select AM, FM, FM2,

cassette or CD

: To seek radio stations, to

advance within CD tracks, or turn the

cassette tape to the other side.

: To adjust radio volume

See Section 3 of your Owner Manual.

Hummer2004_final.qxd 9/5/03 11:20 AM Page 10

Power Folding Mirrors

Fold mirrors

• Move the

selector switch

located above

the mirror con-

trol (“A”

above) to the

center posi-

tion.

• Press the right

side of the

four-way control pad (“B” above) to

fold the mirrors in.

• Press the left side of the four-way

control pad to fold the mirrors out.

If the mirrors have been folded manual-

ly, carefully rotate them outboard to their

original position until a “click” sound is

heard. Then, move them through the

power folding cycle three times to reset

them in their tracks.

See Section 2 of your Owner Manual.

Automatic Headlamp Controls

Turn off Daytime Running Lamps

(DRL) and automatic headlamps

•Turn the exterior lamps knob (located

to the left of the steering wheel) to

OFF ( ).

Activate the automatic headlamp

system

•Turn the exterior lamps knob to

AUTO. The automatic headlamp

system will turn on the front and rear

lamps.

Illuminate the parking lamps, side-

marker lamps, taillamps, instrument

panel/radio lights, license plate lamps

and roof marker lamps

•Turn the exterior lamps knob to the

parking lamp position ( ).

Manually activate the headlamps, all

exterior tail/marker lamps and the

instrument panel/radio lights

•Turn the exterior lamps knob to this

position ( ).

See Section 3 of your Owner Manual.

Hummer2004_final.qxd 9/5/03 11:20 AM Page 11

Getting to Know Your H2

Content Theft-Deterrent System

(if equipped)

Arm the System

• Lock the doors using the power door

lock switch or the Keyless Entry

System transmitter. The alarm is acti-

vated when the symbol shown above

illuminates in the instrument panel

(approximately 30 seconds).

Since your vehicle is equipped with a

Driver Information Center, you can

program the alarm to the following:

• Both Horn/Headlamps

• Horn only

• Lamps only

•Off

See Section 2 of your Owner Manual.

Note: Your vehicle’s factory default set-

ting is Horn and Lamps. See the

Personalizing Your Vehicle section of

this booklet for more information.

Four-Wheel Drive and

Suspension System Controls

Transfer Case

Buttons

Your vehicle’s

transfer case

buttons (shown

here) allow you

to shift into and

out of the vari-

ous four-

wheel-drive

modes.

Locking Rear Axle

The locking rear axle can give you addi-

tional rear wheel traction when driving in

off-road conditions such as mud, snow,

sand, steep

hills and

uneven terrain.

This feature

can only be

engaged when

the transfer

case is in the

4LO Locked

mode. It is rec-

ommended the

axle be locked

when the vehicle is stopped. Please

note that the locker will automatically

deactivate above 20 mph.

Hummer2004_final.qxd 9/5/03 11:20 AM Page 12

cle approximately 2 inches (5 cm) over

the normal ride height for additional

running ground clearance.

To use this feature, the following condi-

tions must be met:

1. All the doors must be fully closed (the

suspension will not rise or lower if a

door is open).

2. The vehicle must be traveling less

than 35 mph (56 km/h), or the system

will not activate.

Tow/Haul Mode

Your vehicle is equipped with a

Tow/Haul mode that assists you when

towing or hauling a heavy load.

When pulling a heavy trailer or load, the

Tow/Haul mode:

• Reduces the frequency and improves

the predictability of transmission

shifts.

• Provides more solid shift feel.

Traction Control System

The H2’s standard Traction Control

System operates only when it senses

that a wheel is spinning or beginning to

lose traction. When this happens, the

system applies the brakes to limit wheel-

spin.

TC2 allows limited wheelspin to help

gain additional traction in deep sand or

mud conditions.

The TC2 system operates only in the fol-

lowing transfer case modes:

• 4HI Lock

• 4LO Lock

• 4LO Lock and Locking Rear Axle

Activate the TC2 System

• Press the TC2 button located on the

instrument panel to the right of the

steering wheel. The orange indicator

light next to the “2” will illuminate

when the feature is active. If the

transfer case is in a mode where the

feature is not allowed, the indicator

light will flash for 15 seconds and

then go out.

Selectable Extended Rear Ride Height

(if equipped)

This feature is part of the optional elec-

tronically controlled air suspension sys-

tem. The selectable rear ride height

allows you to raise the rear of the vehi-

Hummer2004_final.qxd 9/5/03 11:20 AM Page 13

Getting to Know Your H2

• Improves the control of vehicle speed

while requiring less throttle pedal

activity.

See Section 2 of your Owner Manual.

Off-Road Driving Basics

Overview

Off-road driving can be great fun, but it

does have its hazards. The greatest

hazard can be the terrain itself. Off-road

driving involves some new skills, so it’s

very important to read this guide as well

as your Owner Manual.

Loading Your Vehicle for Off-Road

Driving

There are some important things to

remember about loading your vehicle:

• The heaviest things should be on the

load floor and forward of your rear

axle. Put heavier items as forward as

you can, but do not place in the front

seat area.

• Be sure the load is secured properly

to prevent items from being tossed

during off-road driving.

CAUTION

• Cargo on the load floor piled higher

than the seat can be thrown forward

during sudden stops.

• Unsecured cargo on the load floor

can be tossed about when driving

over rough terrain.

• Heavy loads on the roof raise the

vehicle’s center of gravity, making it

more likely to roll over.

High Mobility Characteristics

The HUMMER H2 has a:

A. 10-inch (coil) running ground clear-

ance and a

B. 9.9-inch (22.8-

cm) axle to

ground clear-

ance, while

maintaining a

low silhouette

and a low cen-

ter of gravity.

These characteristics are essential to

safety in off-road operation.

The HUMMER H2 has an:

A. Approach angle of 40.4˚ (coil) and a

B. Departure angle of 39.6˚(coil).

Hummer2004_final.qxd 9/5/03 11:20 AM Page 14

Design specifications required a mini-

mum gradeability of 60% (31˚) slope,

with the vehicle fully loaded on high fric-

tion surfaces at 6 mph (9.7 km/h).

Specifications also required that the

HUMMER H2 be able to traverse a 40%

(22˚) side slope, with the vehicle fully

loaded on high friction surfaces at 6

mph (9.7 km/h).

The HUMMER H2 can climb a 16-inch

(40.6-cm) vertical step.

See Section 4 of your Owner Manual.

Hummer2004_final.qxd 9/5/03 11:20 AM Page 15

Getting to Know Your H2

Memory Positions for Driver’s

Seat, Mirrors, Radio and Climate

Controls

Use the driver’s

door mounted

controls to:

• Adjust driver

seat, including

lumbar adjust-

ment

• Adjust the outside rearview mirrors

• Set the radio presets and climate

control temperature

• Press and hold Memory 1 or 2 until

two chimes sound (about four

seconds)

•To set up for another driver, repeat

the process with the other memory

button

These settings will be remembered after

they are programmed by pressing the

Memory 1 or 2 button on the driver’s

door (shown above). If you unlock the

vehicle with the Remote Keyless Entry

(RKE) transmitter, the vehicle memory

settings will correspond to the number

on the RKE transmitter: 1 or 2.

Please note that these settings will only

be recalled with the vehicle in park.

See Section 2 of your Owner Manual.

Memory Settings for Your

Vehicle (Driver Information

Center)

Your vehicle may be programmed with

these additional features:

• Alarm Warning Type

• Automatic Locking/Unlocking

• Perimeter Lighting

• Remote Lock/Unlock Feedback

• Headlamps On at Exit

• Easy Exit Seat

• Display Units

• Display Language

Selection Options

To cycle through the features below, use

the Menu button ( ) located on your

steering wheel.

Use the Select button ( ) to choose

your desired setting. The last setting

remaining on the display will be the

selection of choice. Continue cycling

through the menu using the Menu button

to set other preferences.

Hummer2004_final.qxd 9/5/03 11:20 AM Page 16

Automatic Door Locking/Unlocking

Options

Locking:

1. Lock Doors Out of Park

2. Lock Doors Manually

3. Lock Doors with Speed

(approx. 8 mph)

Unlocking:

1. Unlock All in Park

2. Unlock All at Key Out of Ignition

3. Unlock Manually

4. Unlock Driver Only in Park

Remote Lock/Unlock Options

1. Flash Lamps

2. Sound Horn

3. Both Lamps and Horn

4. Off

Perimeter Lighting Options

1. Perimeter Lighting On — Headlights

and backup lights will come on for 40

seconds when unlocked with remote

2. Perimeter Lighting Off

Seat Position Recall Options

1. Seat Position Recall Off — Memory

Seat position will only be recalled

when you press memory button 1 or

2 on the driver’s door

2. Seat Position Recall at Key In

3. Seat Position Recall On Remote

Set Easy Exit Seat position

1. Adjust the seat to the desired

position.

2. Press and hold the exit button ( )

on the driver’s door until two chimes

sound. (Note: Seat Exit must be “On”

in your programmed settings.)

Curb View Assist Options

1. Curb View Off

2. Curb View Passenger

3. Curb View Driver

4. Curb View Both

The Curb View Assist feature automati-

cally tilts your outside mirrors downward

to allow you to see curbs when

backing up.

Set Curb View Assist position

• Enable one of the four selections

above.

• Adjust the mirrors while the vehicle is

in reverse. When the vehicle is shift-

ed out of reverse, your selection is

saved in Memory 1 or 2.

See Section 2 of your Owner Manual.

Note: This feature allows the driver

position to be recalled when the ignition

key is inserted. However, Driver 1 or 2

must be identified by pressing the

unlock button on the RKE transmitter

prior to inserting the key.

Hummer2004_final.qxd 9/5/03 11:20 AM Page 17

Getting to Know Your H2

Use the above procedure to monitor the

following settings:

• Personal/Business: Miles

• Personal/Business: Gal.

• Personal/Business: Avg. MPH

• Personal/Business: MPG

• Personal/Business: Annual % Usage

• Business: Hourmeter (Total Engine

Run Time)

• Business: Annual Log

• Business: Timer

Reset the Driver Information Center

(DIC) Average Fuel Economy

• Press the Fuel information button

() located on your steering wheel

until AVG ECON appears in the DIC

display.

• While AVG ECON is displayed, press

and hold the Select button ( ) for

two seconds.

See Section 3 of your Owner Manual.

Note: Whether your vehicle is equipped

with a Driver Information Center or not,

you can select and reset trip features by

using the Trip Odometer Reset Stem

located on the instrument panel cluster.

Driver Information Center

Steering Wheel Controls

(if equipped)

Your steering wheel-mounted DIC con-

trols offer a variety of functions, includ-

ing providing access to trip and fuel

economy information.

Odometer/Trip Settings

Your vehicle’s personal trip and busi-

ness trip odometers operate only when

they are turned on.

Enable the system

• Press the Trip button ( ) until the

word “Personal” appears. Then press

to denote Personal Trip: ON.

Press the Trip button again to monitor

your mileage. (Note: Continue to

press the Trip button to monitor the

features shown in the next column.)

Reset trip information

• Press and hold the Select button

() for two seconds while viewing

any of the trip modes on the Driver

Information Center.

Hummer2004_final.qxd 9/5/03 11:20 AM Page 18

Vehicle Symbols Glossary

Air Bag Readiness Light

Air Conditioning (A/C)

Antilock Brake System

Warning Light

Brake System Warning Light

Cargo Lamp Button

Cruise Control Set

Dome Lamps Override Button

DIC Trip Information Button

(on steering wheel)

DIC Fuel Information Button

(on steering wheel)

DIC Personalization/Menu Button

(on steering wheel)

DIC Select Button

(on steering wheel)

Headlamps

Instrument Panel Brightness

Control

Malfunction Indicator Lamp

(Check Engine Light)

Off

Off/On

Parking Lamps

Rear Window Defogger

Safety Belt Reminder Light

Security Light

Tow/Haul Mode Light

Traction Off Light

Following are examples of symbols you may find on your vehicle. It is important to

become familiar with them, as they alert you to various vehicle operating conditions.

Hummer2004_final.qxd 9/5/03 11:20 AM Page 19

Getting to Know Your H2

Roadside Assistance Program

My GMLink

1-866-HUMMER6 (486-6376)

TTY: 1-888-889-2438

HUMMER’s Roadside Assistance is

available 24 hours a day, 7 days a

week, 365 days a year.

Roadside Assistance provides

stranded owners with over-the-phone

roadside repairs, location of the nearest

HUMMER dealer or the following special

services:

• Fuel delivery

• Lockout service

•Tow to nearest dealership for

warranty service

• Change a flat tire

• Jump starts

The Roadside Assistance services listed

are available for a period of 3 years/

36,000 miles (60,000 km). All services

must be pre-arranged by HUMMER

Roadside Assistance.

The HUMMER Owner Center at My

GMLink is a complimentary service for

HUMMER Owners, a one-stop resource

to enhance your HUMMER ownership

experience. Exclusive member benefits

include online service reminders, vehicle

maintenance tips, online owner manual,

special privileges and more. Sign up

today at www.mygmlink.com

When you call, your Roadside

Assistance representative will ask for

the following information:

•Vehicle Identification Number (VIN)

• Name and home address

•Telephone number and location from

which you are calling

• Location, license plate number and

color of your HUMMER

• Mileage of vehicle and description of

problem

Certain restrictions, precautions and safety procedures apply to your vehicle. Please read your Owner

Manual for complete instructions. All information contained herein is based on information available at

04HUM2QRG

Hummer2004_final.qxd 9/5/03 11:20 AM Page 20

Hummer 2004 H2 Getting To Know Manual

Hummer 2004 H2 Getting To Know Manual

Hummer 2004 H2 Getting To Know Manual

Related papers

Other documents