Kogan KAWLCSDUALA User guide

Category
Mobile device chargers
Type
User guide

Kogan KAWLCSDUALA is a versatile charging solution for your devices, allowing for simultaneous wireless charging of two devices with up to 15W output. With its sleek design and efficient charging capabilities, this charger is ideal for use at home, in the office, or on the go. Simply connect the charger to a power source and place your Qi-enabled devices on the designated charging areas. The charger's heat radiation feature ensures safe and reliable charging, while the included USB-C cable provides convenient connectivity.

Kogan KAWLCSDUALA is a versatile charging solution for your devices, allowing for simultaneous wireless charging of two devices with up to 15W output. With its sleek design and efficient charging capabilities, this charger is ideal for use at home, in the office, or on the go. Simply connect the charger to a power source and place your Qi-enabled devices on the designated charging areas. The charger's heat radiation feature ensures safe and reliable charging, while the included USB-C cable provides convenient connectivity.

2-IN-1 30W DUAL
WIRELESS CHARGER
KAWLCSDUALA
Do not squeeze tightly, drop, or hit this product with other items
Do not disassemble or throw into fire or water, to avoid causing a short circuit
leakage
Do not use wireless charger in severely hot, humid or corrosive environments, to
avoid circuit damage and occur leakage phenomenon
Do not place too close with magnetic stripe or chip card (ID card, bank card, etc.)
to avoid magnetic failure
Keep wireless charger away from implanted medical equipment (pacemaker,
implantable cochlea, etc.) by at least 20cm to avoid potential interference to
medical equipment
To take care of the children, to ensure that they won't play the wireless charger as
a toy, to avoid unnecessary accidents
Keep the charger away from water or other liquids
If you need to clean the charger, please make sure it is not connected power
supply
Ensure environmental temperature remains between 0 - 45° while in use
Input 5V-2A, 9V-2A, 12V-3A
Output Dual 15W (MAX)
Charging Efficiency ≥75%
Charging Distance ≤8mm
Frequency 110-205KHZ
Size 204 x 104 x 8.5mm
Material ABS
Included cable USB-C (1 metre)
SAFETY & WARNINGS
SPECIFICATIONS
Heat radiation
OVERVIEW
Input Port
Wireless charging
induction area
Connect to Power Adapter
1. Connect the power adapter (not supplied) to socket.
2. Connect adapter to the USB-C cable, connecting the other end of the cable to
the wireless charger.
3. After placing a mobile phone with wireless charging function on the phone
charging position, the phone will begin to charge.
Note: Only Samsung mobile phones conform to the full-charging indication. Other
mobiles do not have any indication after full recharged.
OPERATION
USB-C
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Kogan KAWLCSDUALA User guide

Category
Mobile device chargers
Type
User guide

Kogan KAWLCSDUALA is a versatile charging solution for your devices, allowing for simultaneous wireless charging of two devices with up to 15W output. With its sleek design and efficient charging capabilities, this charger is ideal for use at home, in the office, or on the go. Simply connect the charger to a power source and place your Qi-enabled devices on the designated charging areas. The charger's heat radiation feature ensures safe and reliable charging, while the included USB-C cable provides convenient connectivity.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI