2. GoldenEar Technology
  3. 317SAT50TS
317SAT50TS

GoldenEar Technology 317SAT50TS User manual

  • Hello! I've analyzed the user manual for the GoldenEar Technology Shelf/Table Stand 50. This manual provides detailed steps for assembling the stand, including parts identification and instructions for attaching the base, speaker bracket, and wire management clip for the SuperSat 50. I'm ready to answer any questions you have about this assembly process.
  • What is the first step in assembling the Shelf/Table Stand?
    What is the purpose of the rubber feet?
    Where should the speaker be placed during Step 2?
aldenEar
Technology"
A P a s s i o
11
f o r S o
11
i c P e r f e c t i o 11'"
Shelf
/Tab/eStand™
SO
Shelf I Table Stand for
SuperSa(
50
Item Part Name Q'ty
1 Speaker Bracket 2
2 Glass Base (with rubber feet) 2
3 Square Nut 2
4 Screw M4 x 10mm L 2
5 Plastic Washers 4
6 Screw 1/4"-20 x 3" L 4
7 Plastic Washers 2
8 Screw 1/4"-20 x 1/2" L 2
9 Wire Management Clip 2
Step
2:
Assemble SuperSaf" 50 to Shelf/TableStandT• 50
Place the speaker face down on a table to attach the stand
Step
1:
Assemble Shelf/TableStandT• 50
Step
3:
Wire speaker and install
wire management clip
0~
o\fo
0
0
aldenEar
Technology"
A P a s s i o n f o r S o n i c P e r f e c t i o n'"
Shelf
/TableStand™SO
Shelf I Table Stand for
SuperSaf
50
Foot
Mount
Template
1. Clean
bottom
surface
of
glass
base
with
non-abrasive cleaner
2.
Place base,
bottom
surface up,
on
outline
shown
below
3.
Attach self-adhesive
rubber
feet in
the
5 dashed
circles
&
press
firmly.
4.
Flip
over
base and
continue
assembling
the
stand
0 0
/