GYMAX TY580063 User manual

Kids Ride-On Car

Please read all instructions carefully and keep it for future reference.

General Warnings:

Danger! Keep all small parts and packaging materials for this product away from babies and

children, otherwise they may pose a choking hazard.

The product must be installed and used under the supervision of an adult.

Read through each step carefully and follow the proper order.

Remove all Packaging, separate and count all parts and hardware before Installation.

Please ensure that all parts are correctly installed, incorrect Installation can lead to a Danger.

We recommend that, where possible, all items are assembled near to the area in which

they will be placed in use, to avoid moving the product unnecessarily once assembled.

Ensure a secure surface during construction, and place the product always on a flat, steady

and stable surface.

[email protected]

PACKING LIST

Part Name:car body

DESCRIPTION

Quantity:4pcs

Quantity:2pcs

PICTURE DESCRIPTION PICTURE

Part Name:

steering pipe

Part Name:wheel

Part Name:

anti-warping plate

Part Name:front

axle sleeve (long)

Part Name:rear

axle sleeve ( short)

Part Name:

rear shaft (long)

Part Name:hubcap

Quantity:1pc

Part Name:screw

Quantity:1pc

Part Name:

nut with cap

Quantity:1pc

Quantity:2pcs

Part Name:

steering wheel

Part Name:backrest

Part Name:

big split pin

Part Name:

big gasket

Quantity:1pc

Quantity:3pcs

Part Name:

small split pin

Quantity:8pcs

Part Name:

small gasket

I. POINTS FORATTENTION & SAFETY USE AND MAINTENANCE

l. Keep the manual well for use.

2. Put away the removable small spare part. Prevent kids eating it.

3. The transparent protective film on the electroplating adhesive should be

removed before use.Do not throw the package anywhere, avoiding polluting the

environment.

4. Do not keep it close to the fire or in high temperature, wet place.

5. Please do not wash the car. Just clean it with dry cloth.

6. Donot play it on street.

7. Donot play it on rugged place or slope.

8. Suitable age: 18 months to 3 years old. Peak load: 15 KG.

9. Check the product before playing it in every time.

10. Take out the battery if you do not use it for a long time to avoid the leakage of

battery acid.

WARNING:

1.It should be assembled by adult.

2.Children should be supervised by an adult while playing.

II. NAME OF SPARE PART

PRODUCT SIZE 68*31.5*42.5cm

IS09001:2000 QUALITY SYSTEM AUTHENTICATION PATENT

PRODUCT

car body

horn button

steering wheel Backrest

seat

wheel

hubcap

III. ASSEMBLY LEGEND

1.Assembly of steering pipe: (as shown in Pic 1)

Insert a big split pin into the middle hole of the

steering pipe, open the split pin outwards on both

sides. Pass a big gasket, then turn the car over and put

the steering pipe into the hole of front car and

through the steering shaft hole, put a big gasket, put a

big split pin and open it outwards on both sides.

2. Assembly of front wheel components: (as shown in Pic 2) Each side: Insert a

small gasket, a front axle sleeve (long), a wheel and a small gasket, a small split

pin, through the slotted end of the front iron axle in turn. Cover hubcaps on

wheels;

3. Install the backrest (as shown in Pic 3) Align the backrest with the backrest

holes of the car body and press down firmly until it is fastened.

4.Rear wheel assembly (As shown in Pic 4)

Buckle the anti-warping plate to the rear of the car in the direction shown in the

pic.

Pass the small gasket, wheel, rear axle sleeve (short),small gasket through the

slotted end of the rear shaft (long) successively.

Then thread the rear shaft through the rear axle hole of the car body and

anti-warping plate.

Pass small gasket,rear axle sleeve (short),another

wheel, small gasket through the rear shaft.

Then make the small split pin stuck in the rear shaft

slot.

Cover the outside of two wheels with hubcaps

respectively.

5. Assembly of steering wheel (as shown in Pic 3)

Plug the steering wheel into the headstock socket,

install the power cord into the headstock, install the

steering wheel on the main shaft, then penetrate the 5 mm wire through the

steering wheel round hole, install the screw nut with a cap into the steering wheel

hexagon hole, and lock it with a screwdriver.

IV. THE INSTALLATION AND USE OF STEERING WNHEEL

1. Insert 3 AAA batteries into the steering wheel battery box according to correct

polarity. Close the battery cover as the direction shown (Pic 5)

Pic.1

Pic.3

2. Button function: The button on the left side of the steering wheel is for music,

and the button on the right side is for horn. The music button can be switched at

will, making the baby’s car music richer and wonderful.

BATTERY SAFETY PRECAUTIONS:

A. The terminal should not be short-circuit;

B. Rechargeable batteries can only be charged under adult supervision;

C. Rechargeable batteries can only be removed from the toy;

D. Do not mix different types of batteries or the new and old batteries cannot be

mixed;

E. The exhausted batteries should be removed from the battery;

F. Non-rechargeable battery cannot be recharged;

G. The battery shall be put in a correct way.

V. Function Introduction

1. Gliding function: Move forward or backward, turn left or right, helping

coordinate hand and foot ability.

2. Stroller function: The baby grasps the backrest with both hands and pushes the

car forward to help the baby learn to walk.

3. Storage function:Open the seat cushion and items can be stored in it.

wheel

hubcap hubcap

small split pin

small gasket small gasket

front axle sleeve

Pic.2

hole of rear shaft

hubcap

Wheel

hubcap

small split pin

small gasket small gasket

rear axle sleeve

Anti rocker Pic.4 Pic.5

GYMAX TY580063 User manual

Other documents