MULTISPAN MPC-1062L Owner's manual

Type
Owner's manual

MULTISPAN MPC-1062L is a photo control unit that is used to control the movement of a motor in response to signals from photoelectric sensors and proximity switches. The unit has two inputs for photoelectric sensors, one for forward direction and one for reverse direction, and two inputs for proximity switches, also one for forward direction and one for reverse direction. The unit also has one output for controlling the motor in forward direction and one output for controlling the motor in reverse direction.

MULTISPAN MPC-1062L is a photo control unit that is used to control the movement of a motor in response to signals from photoelectric sensors and proximity switches. The unit has two inputs for photoelectric sensors, one for forward direction and one for reverse direction, and two inputs for proximity switches, also one for forward direction and one for reverse direction. The unit also has one output for controlling the motor in forward direction and one output for controlling the motor in reverse direction.

ProductManual
MultispanControlInstrumentsPvtLtd
72/B,Phase1,GIDCEstate,Vatva,Ahmedabad-382445,Gujarat,India.
+91-79-40029250 +91-9978991471
MPC-1062L
PhotoControlUnit
www.multispanindia.com
MPC-1062L www.multispanindia.com
MPC-1062L www.multispanindia.com
Page-1
GraphicalDisplay
PowerSupply
Reset
memory
Output
Operating
Temperature
Relative
Humidity
230VAC,50/60Hz
Resetatfront
NonVolatile
0°CTo55°C
Upto95%RHNonCondition
Model
Display
Size(mm)
PanelCutout
Range
Input
96(H)X96(W)X65(D)mm
92X92mm
0-999999Batchcount
0-99Millisecondforward&reverse
2NPNProxyforforward&reverse
230VACforcontrolwinding
230VACformainwinding&Buzzer
NPN/PNPcolormarksensor
MPC-1062L
TechnicalSpecification
Protection
Level

IP-65(Frontside)AsperIS/IEC60529:2001
*ForwardMotorON
*ReverseMotorON
*ForwardProxy
*ReverseProxy
*BuzzerON
*ColorMarkSensor
*LightMark
*DarkMark
*ToSave&Exit/Reset
*Toreversemotormanually
*To&value/
forparameterchanges
*Toforwardmotormanually
*ForSetParameter
1).WhenthepulsefromtheforwardproxyandthenpulsefromPhotocellatthesametime
thenmotorrunsintheforwarddirection.
2).WhenthepulsefromthereverseproxyandthenpulsefromPhotocellatthesametime
thenmotorrunsinthereversedirection.
3).Inhealthyorrunningcondition,thepulsefromforwardproximity,photocellandthen
samereverseproximityissensedonebyone.

4).Thephotosensorisconnectedastheinputtothephotocontrollerandalsothetwo
proximityswitchesarealsoconnectedasinputforsensing.
5).Dependingupontheconditionsmentionedabovethephotocontrollerwillgivethe
signalaccordinglytomovethemotoreitherinforwardorreversedirection.
6).Ifanymismatchoccurduringpackingtimethenthecontrolleradjustmismatchby
pressing&key.
Working
ParameterSetting
FOR REV
Poweroninstrument.Displaywillshow
BuzzerTurnsonatsetbatchcount
Buzzerremainsonforpresetrelaytime
Presskeyfor2sec,tosetbatchcount.itisselectable000001-999999count
ChangeBy&key.
Presskeyfor4sec,tosetrelay(Buzzer)ontimeselectable0-99.9second
changeby&Key
SET
SET
*
*
*
ENT
ENT
RST
RST
Tosave&exit,Presskey
Tosave&exit,Presskey
MPC-1062L www.multispanindia.com
Page-2
POUCH
SET BATCH
TIME
19
2
98
SET BATCH
0002
SET BUZ TIME
5.0 SEC
ConnectionDiagram
MPC-1062L www.multispanindia.com
Page-3
Productimprovementandupgradeisaconstantprocedure.Soformoreupdatedoperatinginformationandsupport,
Pleasecontactourhelpline:+91-9978991474/76/82orEmailat[email protected]Ver:1904
www.multispanindia.com
17 8 9 10
23456
50/60 Hz
230V AC
LN
+
-
O/P
BUZZER
FRD.
MOTOR
230V AC O/P
COM. REV.
Made in India
12
13 11
1617181920 15
FOR.
I/P
COLOR MARK SENSOR
+12V GND +12V NPNPNP GND
PROXY NPN
REV.
I/P
14
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

MULTISPAN MPC-1062L Owner's manual

Type
Owner's manual

MULTISPAN MPC-1062L is a photo control unit that is used to control the movement of a motor in response to signals from photoelectric sensors and proximity switches. The unit has two inputs for photoelectric sensors, one for forward direction and one for reverse direction, and two inputs for proximity switches, also one for forward direction and one for reverse direction. The unit also has one output for controlling the motor in forward direction and one output for controlling the motor in reverse direction.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI