1pc SIZE 610mm *410mm *30mm
1PC
1PC SIZE 250mm
1PC SIZE 290mm*290mm*25mm
1PC Plush House cover
1PC SIZE 230mm
1PC SIZE 280mm*280mm*12mm
1PC SIZE 350mm*250mm*25mm
3PCS SIZE 215mm
1PC SIZE 405mm*290mm*25mm
2PCS SIZE 350mm
Accessory Size Quautity
A
Rmm*85r 2pcs
B
8min*35rin 4pcs
C
timm*35mm 6pcs
5mm 1pc
Assembly Instructions
Step 1.
Using the Hex key and screws (C x 6) connect screw poles (No.11 x 3) and boards (No.2 x 1 & No.3 x 1). Place
the Plush House Cover (6) over the assembled boards and poles.
Step 2.
Using the Hex key and screws (B x 2), screw the house (No.6 x 1) and pole (No.8 x 1) on board No.1. For pole
placement please refer to the image below
Step 3.
Insert the screw (A x 1) into pole No.8. Attach the board (No.7 x 1) on screw A. Screw pole (No.10 x 1) onto screw
A. Using the Hex key and screw (B x 1) screw pole (No. 8 x 1) with the house NO.6. For pole placement please
refer to the image below.
Step 4.
Insert the screw (A x 1) on pole No.8. Attach the board (No.4 x 1) on screw A. Screw pole (No.9 x 1) on screw A.
Using the Hex key and screw (B X 1) screw board (No.4 x 1) together with the pole (No.10 x 1). Then screw board
(No.5 x 1) with pole No.9. See below image.
/
