LG 42PA450T User manual

Category
LED TVs
Type
User manual
Users Guide Specication
Creator Adviser Approver
In charger
DD/MM/YY
SI Kim
17/01/12
HJ Shin
17/01/12
JO Kim
17/01/12
1. Model Description
2. Printing Specication
3. Special Instructions
4. Changes
1. Trim Size (Format) : 182 mm x 257 mm
2. Printing Colors
Cover : 1 COLOR (BLACK)
Inside : 1 COLOR (BLACK)
3. Stock (Paper)
y
y
Cover : Uncoated paper ,
백상지
60 g/m
2
y
y
Inside : Uncoated paper ,
백상지
60 g/m
2
4. Printing Method : Off-set
5. Bindery : Saddle Stitch
6. Language : English/Russian/Kazakh/Ukrainian (4)
7. Number of pages : 88
N
O
T
E
S
“This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
Details should be followed Eco-SCM management standard[LG(56)-A-2524].
Especially, Part should be followed and controlled the following specication.
(1)Eco-hazardous substances test report should be submitted
when Part certication test and First Mass Production.
(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
(1) Origin Notication
* LGEIN : Printed in Indonesia * LGEWA : Printed in U.K.
* LGESP : Printed in Brazil * LGEMX : Printed in Mexico
* LGEND : Printed in China * LGEIL : Printed in India
* LGEMA : Printed in Poland
Model 42PA4500-ZF/50PA6500-ZA Brand LG Part number
Sufx RU_DR Product name 42PA4500
50PA6500
MFL67099987
(1204-REV02)
02/04/12 Kim SI EKPC300231 Manual Revision For Added Models.
19/01/12 Kim SI EKPC100274 Manual Revision for quality improvement
Rev.
No.
DD/MM/YY Creator ECO Number Change description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Pagination sheet
Total pages : 88 pages
Front
Cover
(EN)
P/No.
2 ... ... .... .... 21
Blank
Front
Cover
(RU)
2 ... ... .... .... 21
Blank
Front
Cover
(KA)
2 ... ... .... .... 21
Blank
Front
Cover
(UK)
2 ... ... ... ... 21
Back
Cover
(EN)
www.lg.com
OWNER’S MANUAL
PLASMA TV
Please read this manual carefully before operating your
set and retain it for future reference.
PA45**
PA49**
PA55**
PA65**
P/NO : MFL67099987 (1204-REV02)
Printed in Korea
2
SAFETY INSTRUCTIONS
ENGLISH
Please read these safety precautions carefully before using the product.
In this manual, the illustration may be somewhat different from your product because
it is just example to help the instruction.
PRECAUTION IN INSTALLING THE
PRODUCT
Keep away from heat sources like electrical
heaters.
- Electrical shock, fire, malfunction or
deformation may occur.
If you can smell smoke or other odours or hear
a strange sound unplug the power cord and
contact the service center.
- If you continue to use without taking proper
measures, electrical shock or fire can occur.
Do not use the product in damp place such
as a bathroom or any place where it is likely
to get wet.
- This may cause a fire or could give an
electric shock.
Install the product on a flat and stable place
that has no risk of dropping the product.
- If the product is dropped, you may be injured
or the product may be broken.
Keep the product away from direct sunlight.
- The product can be damaged.
Do not place the product in a built-in
installation such as bookcase or rack.
- Ventilation required.
ELECTRICAL POWER RELATED
PRECAUTIONS
Make sure to connect the power cable to a
properly earthed outlet.
- You may be electrocuted or injured.
Do not touch the power plug with wet hands.
Additionally, it the cord pin is wet or covered with dust,
dry the power plug completely or wipe dust off.
- You may be electrocuted due to excess moisture.
Never touch this product or antenna during a
thunder or lighting storm.
- You may be electrocuted.
Do not insert a conductor (like a metal chopstick)
into one end of the power cable while the other
end is connected to the input terminal on the wall.
Additionally, do not touch the power cable right after
plugging into the wall input terminal.
You may be electrocuted.
Protect the power cord from physical or
mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits
the appliance.
PRECAUTIONS WHEN MOVING THE
PRODUCT
Do not impact the product when moving it.
- You may be electrocuted or the product
can be damaged.
Make the panel face forward and hold it
with both hands to move.
- If you drop the product, the damaged
product can cause electric shock or fire.
Contact your nearest service center for
repair.
Make sure to turn off the product.
Make sure to remove all cables before
moving the product.
- You may be electrocuted or the product
can be damaged.
PRECAUTIONS WHEN USING THE
PRODUCT
Do not disassemble, repair or modify the
product at your own discretion.
- Fire or electric shock accident can occur.
- Contact the service center for check,
calibration or repair.
To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.
Apparatus shall not be exposed to
dripping or splashing and no objects
filled with liquids, such as vases, shall be
placed on the apparatus.
Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
IMPORTANT INFORMATION TO PREVENT “IMAGE BURN /
BURN-IN” ON YOUR TELEVISION SCREEN
-
When a fixed image (e.g. logos, screen menus, video game,
computer display or teletext pages) is displayed on the
television for an extended period it can become permanently
imprinted on the screen. This phenomenon is known as “image
burn” or “burn-in”. Image burn is not covered under the
manufacturer’s warranty.
-
In order to prevent image burn, avoid displaying a fixed
image on your television’s screen for a prolonged period (2 or
more hours for LCD, 1 or more hours for Plasma).
-
Image burn can also occur on the letterboxed areas of
your television if you use the 4:3 aspect ratio setting for an
extended period.
As long as this unit is connected to the AC wall outlet, it is
not disconnected from the AC power source even if you
turn off this unit by SWITCH.
If you ignore the warning message, you may be seriously injured or there is a
possibility of accident or death.
If you ignore the caution message, you may be slightly injured or the product may be damaged.
CAUTION
WARNING
WARNING
CAUTION
WARNING
CAUTION
WARNING
CAUTION
WARNING
3
TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
3 TABLE OF CONTENTS
4 INSTALLATION PROCEDURE
4 ASSEMBLING AND PREPARING
4 Unpacking
8 Separate purchase
8 Parts and buttons
11 Lifting and moving the TV
12 Setting up the TV
12 - Attaching the stand
14 - Tidying cables
15 - Mounting on a table
16 - Mounting on a wall
16 ADDITIONAL INFORMATION
17 REMOTE CONTROL
18 WATCHING TV
18 Connecting an antenna
18 Turning the TV on for the first time
19 MAKING CONNECTIONS
19 Connecting your Unit
19 OPEN SOURCE SOFTWARE NOTICE
20 WEIGHT
20 TROUBLESHOOTING
4
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
ENGLISH
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer
where you purchased your product. The illustrations in this manual may differ from the actual product and item.
Remote control,
Batteries (AAA)
Owners manual,
CD manual
Cable Holder
x 3 x 4
M5 x 16 M4 x 30
Screw for assembly
Power Cord Holder Power Cord
Protection Cover Ferrite core
(Depending on model)
Polishing cloth
(Depending on model)
Gently wipe the spots on the
cabinet with the polishing cloth.
Stand Body Stand Base Isolator
1
(Depending on model)
Only 42/50PA45**, 50/60PA55**, 50/60PA65**
INSTALLATION PROCEDURE
1
Open the package and make sure all the accessories are included.
2
Attach the stand to the TV set.
3
Connect an external device to the TV set.
5
ASSEMBLING AND PREPARING
ENGLISH
Remote control,
Batteries (AAA)
Owners manual,
CD manual
Pentouch Caution Guidelines
x 3 x 4
M5 x 16 M4 x 30
Screw for assembly
Power Cord Holder D-sub 15 pin signal cable
Protection Cover Ferrite core
(Depending on model)
Power Cord
x 2
Cable Holder Eye-bolt , Wall bracket Polishing cloth
(Depending on model)
Gently wipe the spots on the
cabinet with the polishing cloth.
Home
Charging Cable Tip
The number of tip may differ
depending on the model.
Touch Pen (AN-TP300)
The number of touch pen may
differ depending on the model.
Touch Pen Dongle
(AN-TD200)
Cradle Stand Base
Stand Body Isolator
1
(Depending on model)
Only 42/50PA49**
6
ASSEMBLING AND PREPARING
ENGLISH
1 Antenna Isolator Installation Guide
Use this to install TV in a place where there is a voltage difference between GND of power and GND of
antenna signal.
- If there is a voltage difference between GND of power and GND of antenna signal, the antenna contact
might be heated and excessive heat might cause an accident.
You can improve the safety when watching TV by efficiently removing power voltage from TV antenna.
Avoid disconnecting the antenna Isolator after installation.
Isolator
Plug 1 Plug 2
Plug 1
Plug 2
Exterior of antenna isolator:
Connection method :
- Connect Plug 1 with a signal cable.
- Connect Plug 2 with ANT input end on the back of TV.
ANTENNA/
CABLE IN
ANTENNA/
CABLE IN
RF-Coaxial Wire Isolator
ANTENNA/
CABLE IN
ANTENNA/
CABLE IN
RF-Coaxial Wire Isolator
STB
ANTENNA/
CABLE IN
“Equipment connected to the protective earthing of the building installation through the mains connection or
through other equipment with a connection to protective earthing - and to a cable distribution system using
coaxial cable, may in some circumstances create a fire hazard.
Connection to a cable distribution system has therefore to be provided through a device providing electrical
isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”
When applying the RF Isolator, a slight loss of signal sensitivity can occur.
7
ASSEMBLING AND PREPARING
ENGLISH
The items supplied with your product may vary depending on the model.
Product specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
How to use the ferrite core
1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable.
Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.
2 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.
[to an External device]
[Figure 1]
[to the TV]
10 mm(+ / - 5 mm)
3 Use the ferrite core to reduce the electromagnetic interference in the component Y, Pb, Pr, L,
R cable.
Wind the
component Y, Pb, Pr, L, R cable
on the ferrite core once.
Place the ferrite core close to the TV.
[Cross Section of
Ferrite Core]
(Gray)
[to an External device]
[Figure 3]
[to the TV]
10 mm(+ / - 5 mm)
[Cross Section of
Ferrite Core]
(Black)
[to a wall plug]
[to the TV]
[Figure 2]
[Cross Section of
Ferrite Core]
(Black)
- If there is one ferrite core, follow as shown in Figure 1.
- If there are three ferrite cores, follow as shown in Figures 1 and 2.
- If there are four ferrite cores, follow as shown in Figures 1, 2 and 3.
- If there is LAN port, additionally follow as shown in Figure 4.
NOTE
4 Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the
LAN cable thrice on the ferrite core. Place the ferrite core close to the TV and an External device.
A (Gray) B (Gray)
[Cross Section of
Ferrite Core]
[to the TV]
[to an External
device]
B A A
[Figure 4]
For an optimal connection, HDMI cables and USB de-
vices should have bezels less than 10 mm thick and
18 mm width. Use an extension cable that supports
USB 2.0 if the USB cable or USB memory stick does
not fit into your TV’s USB port.
*A 10 mm
*B 18 mm
8
ASSEMBLING AND PREPARING
ENGLISH
Do not use any pirated items to ensure the safety and product life span.
Any damages or injuries by using pirated items are not covered by the warranty.
CAUTION
Separate purchase
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer for buying these items.
This device only works with compatible LG Plasma TV.
AN-TP300
Touch Pen, Cradle
The number of touch pen and
cradle may differ depending on
the model.
Compatibility
42/50PA45** 50/60PA55** 50/60PA65** 42/50PA49**
AN-TP300
Touch Pen, Cradle
Only
42/50PA49**,
50/60PA65**
Parts and buttons
TV can be placed in standby mode in order to reduce the power consumption. And TV should be
turned off if it will not be watched for some time, as this will reduce energy consumption.
The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
NOTE
Do not step on the glass stand or subject it to any impact. It may break, causing possible injury
from fragments of glass, or the TV may fall.
Do not drag the TV. The floor or the product may be damaged.
Some models have a thin film attached on to the screen and this must not be removed.
CAUTION
9
ASSEMBLING AND PREPARING
ENGLISH
Screen
Connection panel
Speakers
1 Intelligent sensor - Adjusts the image quality corresponding to the surrounding environment.
Button Description
Turns the power on or off
Changes the input source
Accesses the main menus, or saves your input and exits the menus
Selects the highlighted menu option or confirms an input
Adjusts the volume level
Scrolls through the saved programmes
Remote control and
intelligent
1
sensors
Power Indicator
Red – In Standby
mode
Off – TV turns on
Image shown may differ from your TV.
Menu Description
1
PCMCIA Card Slot
2
USB input
3
HDMI IN 3
4
HDMI / DVI IN 2
1
2
4
3
Only
42/50PA49**,
50/60PA65**
Only
42/50PA45**,
50/60PA55**
(Only LAN PORT
model)
Only 42/50PA45**-ZA~F, 42/50PA49**-ZA~F, 50/60PA55**-ZA~F, 50/60PA65**-ZA~F
10
ASSEMBLING AND PREPARING
ENGLISH
Screen
Connection panel
Speakers
1 Intelligent sensor - Adjusts the image quality corresponding to the surrounding environment.
Button Description
Turns the power on or off
Changes the input source
Accesses the main menus, or saves your input and exits the menus
Selects the highlighted menu option or confirms an input
Adjusts the volume level
Scrolls through the saved programmes
Remote control and
intelligent
1
sensors
Power Indicator
Red – In Standby
mode
Off – TV turns on
Image shown may differ from your TV.
Menu Description
1
PCMCIA Card Slot
2
USB input
3
HDMI IN 3
4
HDMI IN 2
1
2
4
3
Only
42/50PA49**,
50/60PA65**
Only
42/50PA45**,
50/60PA55**
(Only LAN PORT
model)
Only 42/50PA45**-ZG~M, 42/50PA49**-ZG~M, 50/60PA55**-ZG~M, 50/60PA65**-ZG~M
11
ASSEMBLING AND PREPARING
ENGLISH
Lifting and moving the TV
When moving or lifting the TV, read the following to
prevent the TV from being scratched or damaged
and for safe transportation regardless of its type
and size.
It is recommended to move the TV in the box
or packing material that the TV originally came
in.
Before moving or lifting the TV, disconnect the
power cord and all cables.
When holding the TV, the screen should face
away from you to prevent the screen from
scratches.
When transporting a large TV, there should be
at least 2 people.
When transporting the TV by hand, hold the
TV as shown in the following illustration.
Avoid touching the screen at all times, as
this may result in damage on the screen
or some of the pixels used to create
images.
CAUTION
Hold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grill area.
When transporting the TV, do not expose the
TV to jolts or excessive vibration.
When transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
Connection panel
12
ASSEMBLING AND PREPARING
ENGLISH
Setting up the TV
Image shown may differ from your TV.
Attaching the stand
Put your TV on a pedestal stand and mount the TV on a table or wall.
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
1 2
3
Front
M5 x 16
3 EA
Only 42/50PA45**, 42/50PA49**, 50/60PA55**, 50/60PA65**
When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
CAUTION
Tighten the screws firmly to prevent the TV
from tilting forward. Do not over tighten.
CAUTION
Stand Base
Stand Body
M4 x 30
4 EA
13
ASSEMBLING AND PREPARING
ENGLISH
CAUTION
Tighten the screws firmly to prevent the TV
from tilting forward. Do not over tighten.
M4 x 30
4 EA
1
2
To detach the stand,
Protection Cover
3
When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
CAUTION
This will protect the opening from accu-
mulating dust and dirt.
When installing the wall mounting brack-
et, use the Protection cover.
NOTE
M4 x 30
2 EA
14
ASSEMBLING AND PREPARING
ENGLISH
Tidying cables
Image shown may differ from your TV.
Do not move the TV by holding the Cable
Holder & Power Cord Holder, as the
Cable Holders may break, and injuries
and damage to the TV may occur.
CAUTION
1 Install the Power Cord Holder and Power
Cord. It will help prevent the power cable from
being removed by accident.
2 Gather and bind the cables with the Cable
Holder.
Power Cord Holder
Cable Holder
15
ASSEMBLING AND PREPARING
ENGLISH
Mounting on a table
Image shown may differ from your TV.
1
Lift and tilt the TV into its upright position on a table.
- Leave a 10 cm (minimum) space from the wall for
proper ventilation.
2
Connect the power cord to a wall outlet.
10 cm
10 cm
10 cm
10 cm
Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
CAUTION
Swivel 20 degrees to the left or right and
adjust the angle of the TV to suit your
view.
NOTE
Securing the TV to a wall (Depending on model)
Image shown may differ from your TV.
1
Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
Use a platform or cabinet that is strong
and large enough to support the TV
securely.
NOTE
Make sure that children do not climb on
or hang on the TV.
CAUTION
When adjusting the angle of the product,
watch out for your fingers.
CAUTION
16
ASSEMBLING AND PREPARING / ADDITIONAL INFORMATION
ENGLISH
Mounting on a wall
Attach a wall mount bracket at the rear of the TV
carefully and install the wall mount bracket on a
solid wall perpendicular to the floor. When you
attach the TV to other building materials, please
contact qualified personnel.
LG recommends that wall mounting be performed
by a qualified professional installer.
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described in
the following table.
Separate purchase(Wall Mounting Bracket)
Model 42/50PA45**
42/50PA49**
50PA55**
50PA65**
60PA55**
60PA65**
VESA (A x B) 400 x 400 600 x 400
Standard screw M6 M8
Number of screws 4 4
Wall mount bracket PSW400B,
PSW400BG
PSW600B,
PSW600BG
Use the screws that are listed on the
VESA standard screw specifications.
The wall mount kit includes an installation
manual and necessary parts.
The length of screws may differ
depending on the wall mount. Make sure
to use the proper length.
For more information, refer to the manual
supplied with the wall mount bracket.
NOTE
Disconnect the power first, and then move
or install the TV. Otherwise electric shock
may occur.
If you install the TV on a ceiling or slanted
wall, it may fall and result in injury. Use
an authorized LG wall mount bracket
and contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
Use the screws and wall mount bracket that
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
CAUTION
A
B
Viewing the owner’s manual
The owner’s manual in PDF file format is supplied
on the enclosed CD. Install the Adobe Acrobat
Reader to view the owner’s manual on your PC.
1
Insert the supplied CD. The web page appears
automatically.
2
Click Owner’s Manual on the web page.
3
View the owner’s manual.
NOTE
If the web page does not appear
automatically, access My computer and then
click LG and index.htm to view the owner’s
manual.
ADDITIONAL
INFORMATION
17
ENGLISH
REMOTE CONTROL
ENGLISH
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
and ends to the label inside the compartment, and close the battery cover. Be
sure to point the remote control to the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
Do not mix old and new batteries, as this may damage the remote control.
CAUTION
Image shown may differ from your TV.
(POWER)
Turns the TV on or off.
ENERGY SAVING Adjusts the brightness of the screen to reduce energy consumption .
INPUT Changes the input source; Turns the TV on .
TV/RAD Selects Radio, TV and DTV programme.
Number buttons Enters numbers.
LIST Accesses the saved programme list.
Q.VIEW Returns to the previously viewed programme.
+ - Adjusts the volume level.
FAV Accesses your favourite programme list.
MUTE Mutes all sounds.
P
∧∨ (P + -)
Scrolls through the saved programmes.
PAGE Moves to the previous or next screen.
GUIDE Shows programme guide.
SETTINGS Accesses the main menus, or saves your input and exit the menus.
Q. MENU Accesses the quick menus.
Navigation buttons
(up/down/left/right)
Scrolls through menus or options.
OK Selects menus or options and confirms your input.
Returns to the previous level.
INFO Views the information of the current programme and screen.
EXIT Clears all on-screen displays and return to TV viewing.
Coloured buttons These buttons are used for teletext (on TELETEXT models only),
Programme edit.
1
TELETEXT
BUTTONS
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
SUBTITLE Recalls your preferred subtitle in digital mode.
Control buttons
(
, , , , )
Controls the MY MEDIA menus, or the SIMPLINK compatible devices
(USB,SIMPLINK).
SIMPLINK
(Depending on model)
Accesses the AV devices connected with the HDMI cable through HDMI-
CEC.
Opens the SIMPLINK menu.
AD Switches the Audio Description On or Off.
RATIO Resizes an image.
AV MODE
(Depending on model)
Selects an AV mode
1
1
or
or
18
ENGLISH
WATCHING TV
WATCHING TV
Connecting an antenna
Connect an antenna to watch TV while referring to
the following.
To prevent damage do not connect to the mains
outlet until all connections are made between the
devices.
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
3
Follow the on-screen instructions to customize
your TV settings according to your preferences.
For optimum picture quality, adjust
antenna direction.
In poor signal areas, to achieve better
picture quality it may be necessary to
install a signal amplifier to the antenna.
If the image quality is poor with an
antenna connected, aim the antenna to
the correct direction.
An antenna cable and converter are not
supplied.
NOTE
Turning the TV on for the first
time
When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
and customize the basic settings.
1
Connect the power cord to a power outlet.
2
In Standby mode, press (POWER) to turn the TV
on.
The Initial setting screen appears if you turn
the TV on for the first time.
You can also access Factory Reset by
accessing OPTION in the main menus.
NOTE
4
When the basic settings are complete,
press OK.
If you do not complete the Initial setting, it
will appear whenever the TV turns on.
Disconnect the power cord from the
power outlet when you do not use the TV
for a long period of time.
NOTE
5
To turn the TV off, press
(POWER)
.
Selects a language to display.
Selects Home Use for the
home environment.
Selects a country to display.
(Depending on model)
Language
Mode Setting
Country
Set Password
Time Zone
Network Setting
Auto Tuning
Selects the time zone and
daylight saving.
(When Russia is selected for
Country)
(If there is LAN port) selects
Network Setting to display.
Scans and saves
available programmes
automatically.
Set the password.
(When France or Italy is
selected for Country)
For those countries without confirmed DTV
broadcasting standards, some DTV features
might not work, depending on the DTV
broadcasting environment.
When France is selected for Country,
password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’, ‘2’, ‘3’,
‘4’.
To display images in the best quality for your
home environment, select Home Use.
Store Demo is suitable for the retail
environment.
If you select Store Demo, any customized
settings will switch back to the default
settings of Store Demo in 5 minutes.
NOTE
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90

LG 42PA450T User manual

Category
LED TVs
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI